1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
From: Xo Wang <xow@google.com>
Date: Fri, 21 Oct 2016 10:20:13 -0700
Subject: [PATCH] net: phy: broadcom: Add support for BCM54612E
This PHY has internal delays enabled after reset. This clears the
internal delay enables unless the interface specifically requests them.
Signed-off-by: Xo Wang <xow@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -337,6 +337,41 @@ static int bcm5481_config_aneg(struct ph
return ret;
}
+static int bcm54612e_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* First, auto-negotiate. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Clear TX internal delay unless requested. */
+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
+ /* Disable TXD to GTXCLK clock delay (default set) */
+ /* Bit 9 is the only field in shadow register 00011 */
+ bcm_phy_write_shadow(phydev, 0x03, 0);
+ }
+
+ /* Clear RX internal delay unless requested. */
+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+ u16 reg;
+
+ /* Errata: reads require filling in the write selector field */
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+ MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
+ reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ /* Disable RXD to RXC delay (default set) */
+ reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
+ /* Clear shadow selector field */
+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+ MII_BCM54XX_AUXCTL_MISC_WREN | reg);
+ }
+
+ return ret;
+}
+
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -485,6 +520,18 @@ static struct phy_driver broadcom_driver
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
}, {
+ .phy_id = PHY_ID_BCM54612E,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM54612E",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = bcm54612e_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
+}, {
.phy_id = PHY_ID_BCM54616S,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54616S",
@@ -600,6 +647,7 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_BCM5411, 0xfffffff0 },
{ PHY_ID_BCM5421, 0xfffffff0 },
{ PHY_ID_BCM5461, 0xfffffff0 },
+ { PHY_ID_BCM54612E, 0xfffffff0 },
{ PHY_ID_BCM54616S, 0xfffffff0 },
{ PHY_ID_BCM5464, 0xfffffff0 },
{ PHY_ID_BCM5481, 0xfffffff0 },
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -18,6 +18,7 @@
#define PHY_ID_BCM5421 0x002060e0
#define PHY_ID_BCM5464 0x002060b0
#define PHY_ID_BCM5461 0x002060c0
+#define PHY_ID_BCM54612E 0x03625e60
#define PHY_ID_BCM54616S 0x03625d10
#define PHY_ID_BCM57780 0x03625d90
|
