blob: 9d9b47eeaaa5f7d5ab1f331ea406b0d3405147b3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
linksys_get_target_firmware() {
local cur_boot_part mtd_ubi0
cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
if [ -z "${cur_boot_part}" ]; then
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
kernel|rootfs)
cur_boot_part=1
;;
alt_kernel|alt_rootfs)
cur_boot_part=2
;;
esac
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
"${cur_boot_part}" "${mtd_ubi0}"
fi
# OEM U-Boot for EA6350v3 and EA8300; bootcmd=
# if test $auto_recovery = no;
# then bootipq;
# elif test $boot_part = 1;
# then run bootpart1;
# else run bootpart2;
# fi
case "$cur_boot_part" in
1)
fw_setenv -s - <<-EOF
boot_part 2
auto_recovery yes
EOF
printf "alt_kernel"
return
;;
2)
fw_setenv -s - <<-EOF
boot_part 1
auto_recovery yes
EOF
printf "kernel"
return
;;
*)
return
;;
esac
}
linksys_get_root_magic() {
(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
}
platform_do_upgrade_linksys() {
local magic_long="$(get_magic_long "$1")"
local rm_oem_fw_vols="squashfs ubifs" # from OEM [alt_]rootfs UBI
local vol
mkdir -p /var/lock
local part_label="$(linksys_get_target_firmware)"
touch /var/lock/fw_printenv.lock
if [ -z "$part_label" ]; then
echo "cannot find target partition"
exit 1
fi
local target_mtd=$(find_mtd_part "$part_label")
[ "$magic_long" = "73797375" ] && {
CI_KERNPART="$part_label"
if [ "$part_label" = "kernel" ]; then
CI_UBIPART="rootfs"
else
CI_UBIPART="alt_rootfs"
fi
local mtdnum="$(find_mtd_index "$CI_UBIPART")"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$(nand_find_ubi "$CI_UBIPART")"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$(nand_find_ubi "$CI_UBIPART")"
fi
if [ "$ubidev" ]; then
for vol in $rm_oem_fw_vols; do
ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
done
fi
# complete std upgrade
nand_upgrade_tar "$1"
}
[ "$magic_long" = "27051956" ] && {
# This magic is for a uImage (which is a sysupgrade image)
# check firmwares' rootfs types
local oldroot="$(linksys_get_root_magic "$target_mtd")"
local newroot="$(linksys_get_root_magic "$1")"
if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
# we're upgrading from a firmware with UBI to one with UBI
# erase everything to be safe
# - Is that really needed? Won't remove (or comment) the if,
# because it may be needed in a future device.
#mtd erase $part_label
#get_image "$1" | mtd -n write - $part_label
echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
get_image "$1" | mtd write - "$part_label"
else
echo "writing \"$1\" image to \"$part_label\""
get_image "$1" | mtd write - "$part_label"
fi
}
}
|
