path: root/target/linux/layerscape/patches-5.4/302-dts-0010-arm64-dts-ls208xa-accumulated-change-to-ls208xa-boar.patch

From 9d8de47b617baa4fa92d9a1502904c0373f80384 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Thu, 2 May 2019 16:12:40 -0500
Subject: [PATCH] arm64: dts: ls208xa: accumulated change to ls208xa boards

commit 46123df3a174f0d76c8b954a0386e64841453836
Author: Florinel Iordache <florinel.iordache@nxp.com>
Date:   Thu Aug 9 12:29:18 2018 +0300

    arm64: dts: updates for Unified Backplane driver

    Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>

commit 76a741dbb9b93ea9ab2f6122b8df5bc4f0db7676
Author: Nipun Gupta <nipun.gupta@nxp.com>
Date:   Sat Apr 28 00:20:16 2018 +0530

    arm64: dts: ls208x: add dma-cohernet property in fsl-mc node

    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

commit f6309e9dc8e0c6171a43fd6759123b5de1c574aa
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Mon Apr 2 16:27:23 2018 +0800

    arm64: dts: ls208xa: add dts entry for A-010650

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit 8c37bad2038a210a4f0a369fd946aaae4317eac4
Author: Nipun Gupta <nipun.gupta@nxp.com>
Date:   Fri Apr 20 17:14:10 2018 +0530

    arm64: dts: ls208x: add dma ranges property

    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
Author: Changming Huang <jerry.huang@nxp.com>
Date:   Wed Apr 19 12:49:50 2017 +0800

    arm/arm64: dts: Add property snps incr burst type adjustment for
INCR burst type for dwc3

    Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

commit dbb65ea8ee1d46067e756c6d64c7fe66a0058f49
Author: Pankaj Bansal <pankaj.bansal@nxp.com>
Date:   Mon Mar 5 12:37:04 2018 +0530

    arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.

    NXP Erratum A008585 affects A57 core cluster used in LS2085rev1.
    However this problem has been fixed in A72 core cluster used in
LS2088.
    Therefore remove the erratum from LS2088A. Keeping it only in
LS2085.

    Cc: <stable@vger.kernel.org> # 4.14
    Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
    Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
    Acked-by: Priyanka Jain <priyanka.jain@nxp.com>

commit 85f41b0f6abe6b9d7d303790bb3712ed559890e9
Author: Nipun Gupta <nipun.gupta@nxp.com>
Date:   Mon Feb 26 10:39:54 2018 +0530

    arm64: dts: ls208xa: add dma coherent property in smmu node

    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

commit e910d8b78b823a625451b1da7ae7499dadde2ae9
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date:   Thu Feb 1 23:49:56 2018 +0530

    arm64: dts: freescale: ls208xa: Modify DT nodes for qspi

    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>

commit 7654ef78c8c85de3a43dfa0dffd572d589ea1332
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Wed Nov 1 10:34:04 2017 +0800

    arm64: dts: ls208xa: correct the i2c clock to 1/2 platform pll

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit efdb129228baa6a999c06072338b979d783d7b60
Author: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Date:   Thu Aug 31 14:45:02 2017 +0530

    arm64: dts: ls208xa: Add iommu-map property for pci

    This patch adds iommu-map property for PCIe, which enables
    SMMU for these devices on LS208xA devices.

    Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>

commit 45af5d025eafaf4a85000e16e5f47992de663ff6
Author: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
Date:   Mon Aug 21 11:46:59 2017 +0300

    arm64: dts: ls2088a: update backplane support with dpmac connections

    Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>

commit b2ede6c088a883fceb348e8659253b2c7cdeeff8
Author: Santan Kumar <santan.kumar@nxp.com>
Date:   Thu Jun 22 13:04:00 2017 +0530

    arm64: dts: ls2088ardb: Update nodes for QSPI

    -As per board design, different QSPI flash is connected on
      boards, hence change QSPI flash node from s25fl256s1 to s25fs512ss
in
      device tree.
    -Enable fast-read support in QSPI node.

    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>

commit d5324a75c56e9f9210113e51cffa846a86b50fbd
Author: Santan Kumar <santan.kumar@nxp.com>
Date:   Mon Jun 19 15:26:03 2017 +0530

    arm64: dts: ls2081ardb: Update nodes for QSPI, SATA, INA220

    Update ls2081ardb.dts for below nodes:
     -As per updated board design, different QSPI flash is connected on
      boards, hence change QSPI flash node from n25q512a to s25fs512ss
in
      device tree.
     -Enable dual flash support in QSPI node.
     -Add DTS node for INA220.
     -Enable SATA node.

    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
    Signed-off-by: Tao Yang <b31903@freescale.com>
    Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>

commit 43d506fa19e1e50e4c2e4f9689ad3c60d9a06d71
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Thu May 11 08:42:19 2017 +0800

    arm64: dts: ls208x: add property for PCA954x Mux device

    PCA954x Mux device should never be turned-off after power-on. if
    device tree contians "i2c-mux-never-disable" property for pca954x
    device node, it can ensure that skip disabling PCA954x Mux device.

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit 6d3a96446a7ffccb0b9936b616d855c8d5572bce
Author: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Date:   Wed May 3 14:26:35 2017 +0000

    arm64: dts: fsl/ls1088,ls208x: Add mdio and phy nodes

    Add mdio and phy nodes for the following FSL platforms:
    - LS1088A RDB
    - LS2080A QDS & RDB
    - LS2088A QDS, RDB & simu

    Contains contributions from patches by the following authors:
    Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
    Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
    Signed-off-by: Pratiyush Mohan Srivastava
<pratiyush.srivastava@nxp.com>
    Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
    Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
    Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
    Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
    Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
    Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>

commit 0443625ea24bc4ea315c30b718712254c588bd18
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date:   Fri May 5 13:54:22 2017 +0530

    arm64: dts: ls208xa: Add QSPI Flash node for RDB

    This is temporary patch, will rewrite for open source

    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>

commit ed0ce1d49aa72d12ea54f82d3771a377c68af37e
Author: Priyanka Jain <priyanka.jain@nxp.com>
Date:   Thu Apr 13 16:49:40 2017 +0530

    arm64: dts: ls2081ardb: Add DTS support for NXP LS2081ARDB

    This patch add support for NXP LS2081ARDB board which has
    LS2081A SoC.

    LS2081A SoC is 40-pin derivative of LS2088A SoC
    So, from functional perspective both are same.
    Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts

    Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

commit e4fb842554a5e7b8c3f6e3c243222dbe4515aee3
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Thu Apr 27 15:01:54 2017 +0800

    arm64: dts: ls208xa: add ftm0 nodes

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit 64c3e2c3a7ddc89c3c23c012ee364f2c014524d2
Author: costi <constantin.tudor@freescale.com>
Date:   Fri Mar 3 18:08:28 2017 +0200

    arm64: dts: fsl-ls2088: Add mdio/phy devices

    Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>

commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
Author: Po Liu <po.liu@nxp.com>
Date:   Fri Sep 30 17:11:36 2016 +0800

    arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property

    Some platforms(NXP Layerscape for example) aer/pme interrupts was
not
    MSI/MSI-X/INTx but using interrupt line independently. This patch
    add "aer", "pme" interrupt-names for aer/pme interrupt.

    With the interrupt-names "aer", "pme" code could probe aer/pme
interrupt
    line for pcie root port, replace the aer/pme interrupt service irqs.

    This is intend to fixup the Layerscape platforms which aer/pmes
interrupts
    was not MSI/MSI-X/INTx, but using interrupt line independently.

    Since the interrupt-names "intr" never been used. Remove it.

    Signed-off-by: Po Liu <po.liu@nxp.com>
    Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

commit 64d859836d3d194e8bc926bb951fd21859689824
Author: Nipun Gupta <nipun.gupta@nxp.com>
Date:   Mon Dec 5 05:20:51 2016 +0530

    arm64: dts: ls208xa: Comply with the new iommu binding for fsl_mc

    fsl-mc bus support the new iommu-map property. Comply to this
binding
    for fsl_mc bus.

    Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts  |  62 +++++++++
 arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts  |  80 +++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi     |  12 ++
 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts  | 120 ++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts  |  80 +++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi |   1 +
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi |  11 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 155 +++++++++++++++++++--
 8 files changed, 505 insertions(+), 16 deletions(-)

--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -23,3 +23,65 @@
 		stdout-path = "serial0:115200n8";
 	};
 };
+
+&ifc {
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+		reg = <3 0 0x300>;		/* TODO check address */
+		ranges = <0 3 0 0x300>;
+
+		mdio_mux_emi1 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+
+			#address-cells=<1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio_phy0@1c {
+					reg = <0x1c>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy13: mdio_phy1@1d {
+					reg = <0x1d>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy14: mdio_phy2@1e {
+					reg = <0x1e>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy15: mdio_phy3@1f {
+					reg = <0x1f>;
+					phy-connection-type = "sgmii";
+				};
+			};
+		};
+	};
+};
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+};
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+};
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+};
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -23,3 +23,83 @@
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&emdio1 {
+	status = "disabled";
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1_phy@1 {
+		reg = <0x10>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy2: emdio1_phy@2 {
+		reg = <0x11>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy3: emdio1_phy@3 {
+		reg = <0x12>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy4: emdio1_phy@4 {
+		reg = <0x13>;
+		phy-connection-type = "xfi";
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2_phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 1 0x4>; /* Level high type */
+		reg = <0x0>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy2: emdio2_phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 2 0x4>; /* Level high type */
+		reg = <0x1>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy3: emdio2_phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 4 0x4>; /* Level high type */
+		reg = <0x2>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy4: emdio2_phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 5 0x4>; /* Level high type */
+		reg = <0x3>;
+		phy-connection-type = "xfi";
+	};
+};
+
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina nodes commented out until driver is integrated
+ *&dpmac1 {
+ *	phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ *	phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ *	phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ *	phy-handle = <&mdio1_phy4>;
+ *};
+ */
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+};
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+};
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+};
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -118,6 +118,18 @@
 	};
 };
 
+&timer {
+	fsl,erratum-a008585;
+};
+
+&usb0 {
+	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+};
+
+&usb1 {
+	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+};
+
 &pcie1 {
 	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 	       0x10 0x00000000 0x0 0x00002000>; /* configuration space */
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -22,3 +22,123 @@
 		stdout-path = "serial0:115200n8";
 	};
 };
+
+&ifc {
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+		reg = <3 0 0x300>;		/* TODO check address */
+		ranges = <0 3 0 0x300>;
+
+		mdio_mux_emi1 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+
+			#address-cells=<1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio_phy0@1c {
+					reg = <0x1c>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy13: mdio_phy1@1d {
+					reg = <0x1d>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy14: mdio_phy2@1e {
+					reg = <0x1e>;
+					phy-connection-type = "sgmii";
+				};
+				mdio0_phy15: mdio_phy3@1f {
+					reg = <0x1f>;
+					phy-connection-type = "sgmii";
+				};
+			};
+		};
+	};
+};
+
+&pcs_mdio1 {
+		pcs_phy1: ethernet-phy@0 {
+		backplane-mode = "10gbase-kr";
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		fsl,lane-handle = <&serdes1>;
+		fsl,lane-reg = <0x9C0 0x40>;/* lane H */
+	};
+};
+
+&pcs_mdio2 {
+		pcs_phy2: ethernet-phy@0 {
+		backplane-mode = "10gbase-kr";
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		fsl,lane-handle = <&serdes1>;
+		fsl,lane-reg = <0x980 0x40>;/* lane G */
+	};
+};
+
+&pcs_mdio3 {
+		pcs_phy3: ethernet-phy@0 {
+		backplane-mode = "10gbase-kr";
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		fsl,lane-handle = <&serdes1>;
+		fsl,lane-reg = <0x940 0x40>;/* lane F */
+	};
+};
+
+&pcs_mdio4 {
+		pcs_phy4: ethernet-phy@0 {
+		backplane-mode = "10gbase-kr";
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		fsl,lane-handle = <&serdes1>;
+		fsl,lane-reg = <0x900 0x40>;/* lane E */
+	};
+};
+
+/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX.
+ * &dpmac1 {
+ *	phy-handle = <&pcs_phy1>;
+ * };
+ *
+ * &dpmac2 {
+ *	phy-handle = <&pcs_phy2>;
+ * };
+ *
+ * &dpmac3 {
+ *	phy-handle = <&pcs_phy3>;
+ * };
+ *
+ * &dpmac4 {
+ *	phy-handle = <&pcs_phy4>;
+ * };
+ */
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+};
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+};
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+};
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -22,3 +22,83 @@
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&emdio1 {
+	status = "disabled";
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1_phy@1 {
+		reg = <0x10>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy2: emdio1_phy@2 {
+		reg = <0x11>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy3: emdio1_phy@3 {
+		reg = <0x12>;
+		phy-connection-type = "xfi";
+	};
+	mdio1_phy4: emdio1_phy@4 {
+		reg = <0x13>;
+		phy-connection-type = "xfi";
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2_phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 1 0x4>; /* Level high type */
+		reg = <0x0>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy2: emdio2_phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 2 0x4>; /* Level high type */
+		reg = <0x1>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy3: emdio2_phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 4 0x4>; /* Level high type */
+		reg = <0x2>;
+		phy-connection-type = "xfi";
+	};
+	mdio2_phy4: emdio2_phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <0 5 0x4>; /* Level high type */
+		reg = <0x3>;
+		phy-connection-type = "xfi";
+	};
+};
+
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina PHYs commented out until proper driver is integrated
+ *&dpmac1 {
+ *	phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ *	phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ *	phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ *	phy-handle = <&mdio1_phy4>;
+ *};
+ */
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+};
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+};
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+};
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -129,6 +129,7 @@
 
 &qspi {
 	status = "okay";
+	fsl,qspi-has-second-chip;
 	flash0: s25fl256s1@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -49,6 +49,7 @@
 		reg = <0x75>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-never-disable;
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -108,7 +109,15 @@
 };
 
 &qspi {
-	status = "disabled";
+	status = "okay";
+	flash0: s25fs512s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &sata0 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -114,13 +114,12 @@
 		};
 	};
 
-	timer {
+	timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
 			     <1 11 4>, /* Virtual PPI, active-low */
 			     <1 10 4>; /* Hypervisor PPI, active-low */
-		fsl,erratum-a008585;
 	};
 
 	pmu {
@@ -560,15 +559,126 @@
 			#interrupt-cells = <2>;
 		};
 
+		/* TODO: WRIOP (CCSR?) */
+		emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
+					  * E-MDIO1: 0x1_6000
+					  */
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B96000 0x0 0x1000>;
+			device_type = "mdio";	/* TODO: is this necessary? */
+			little-endian;	/* force the driver in LE mode */
+
+			/* Not necessary on the QDS, but needed on the RDB */
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
+					  * E-MDIO2: 0x1_7000
+					  */
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8B97000 0x0 0x1000>;
+			device_type = "mdio";	/* TODO: is this necessary? */
+			little-endian;	/* force the driver in LE mode */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio1: mdio@0x8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio2: mdio@0x8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio3: mdio@0x8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio4: mdio@0x8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio5: mdio@0x8c17000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio6: mdio@0x8c1b000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio7: mdio@0x8c1f000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pcs_mdio8: mdio@0x8c23000 {
+			status = "disabled";
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			device_type = "mdio";
+			little-endian;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		i2c0: i2c@2000000 {
 			status = "disabled";
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <0 34 0x4>; /* Level high type */
 			clock-names = "i2c";
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 1>;
+			scl-gpios = <&gpio3 10 0>;
 		};
 
 		i2c1: i2c@2010000 {
@@ -579,7 +689,7 @@
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <0 34 0x4>; /* Level high type */
 			clock-names = "i2c";
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 1>;
 		};
 
 		i2c2: i2c@2020000 {
@@ -590,7 +700,7 @@
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <0 35 0x4>; /* Level high type */
 			clock-names = "i2c";
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 1>;
 		};
 
 		i2c3: i2c@2030000 {
@@ -601,7 +711,7 @@
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <0 35 0x4>; /* Level high type */
 			clock-names = "i2c";
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 1>;
 		};
 
 		ifc: ifc@2240000 {
@@ -633,8 +743,8 @@
 		pcie1: pcie@3400000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 108 0x4>; /* Level high type */
-			interrupt-names = "intr";
+			interrupts = <0 108 0x4>; /* aer interrupt */
+			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -642,6 +752,7 @@
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
@@ -654,8 +765,8 @@
 		pcie2: pcie@3500000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 113 0x4>; /* Level high type */
-			interrupt-names = "intr";
+			interrupts = <0 113 0x4>; /* aer interrupt */
+			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -663,6 +774,7 @@
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
@@ -675,8 +787,8 @@
 		pcie3: pcie@3600000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>; /* Level high type */
-			interrupt-names = "intr";
+			interrupts = <0 118 0x4>; /* aer interrupt */
+			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -684,6 +796,7 @@
 			num-viewport = <256>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
@@ -696,8 +809,8 @@
 		pcie4: pcie@3700000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 123 0x4>; /* Level high type */
-			interrupt-names = "intr";
+			interrupts = <0 123 0x4>; /* aer interrupt */
+			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -705,6 +818,7 @@
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 1>;	/* This is fixed-up by u-boot */
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
@@ -754,11 +868,22 @@
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
+		serdes1: serdes@1ea0000 {
+				reg = <0x0 0x1ea0000 0 0x00002000>;
+				compatible = "fsl,serdes-10g";
+		};
+
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
+
+		ftm0: ftm0@2800000 {
+			compatible = "fsl,ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			interrupts = <0 44 4>;
+		};
 	};
 
 	ddr1: memory-controller@1080000 {