1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sun, 30 Dec 2018 23:24:41 +0100
Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
This patch apply chages for OpenWRT in P2020RDB
dts file.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
1 file changed, 63 insertions(+), 35 deletions(-)
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -5,10 +5,15 @@
* Copyright 2009-2012 Freescale Semiconductor Inc.
*/
+/dts-v1/;
+
/include/ "p2020si-pre.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- model = "fsl,P2020RDB";
+ model = "Freescale P2020RDB";
compatible = "fsl,P2020RDB";
aliases {
@@ -34,48 +39,38 @@
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
+ partition@40000 {
+ compatible = "denx,fit";
+ reg = <0x00040000 0x00ec0000>;
+ label = "firmware";
+ };
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "u-boot";
+ read-only;
+ };
};
};
@@ -85,6 +80,7 @@
compatible = "fsl,p2020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
+ nand-ecc-mode = "none";
partition@0 {
/* This location must not be altered */
@@ -140,13 +136,43 @@
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
+ gpio0: gpio-controller@fc00 {
+ };
+
i2c@3000 {
+ temperature-sensor@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
+ i2c@3100 {
+ pmic@11 {
+ compatible = "zl2006";
+ reg = <0x11>;
+ };
+
+ gpio@18 {
+ compatible = "nxp,pca9557";
+ reg = <0x18>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c01";
+ reg = <0x52>;
+ };
+ };
+
spi@7000 {
flash@0 {
#address-cells = <1>;
@@ -200,10 +225,12 @@
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
phy1: ethernet-phy@1 {
interrupts = <3 1 0 0>;
reg = <0x1>;
+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
tbi-phy@2 {
device_type = "tbi-phy";
|
