path: root/target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch

From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 5 Jan 2017 16:47:39 +0000
Subject: [PATCH] net: phy: move phy_lookup_setting() and guts of
 phy_supported_speeds() to phy-core

phy_lookup_setting() provides useful functionality in ethtool code
outside phylib.  Move it to phy-core and allow it to be re-used (eg,
in phylink) rather than duplicated elsewhere.  Note that this supports
the larger linkmode space.

As we move the phy settings table, we also need to move the guts of
phy_supported_speeds() as well.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -149,125 +149,6 @@ static inline int phy_aneg_done(struct p
 	return genphy_aneg_done(phydev);
 }
 
-/* A structure for mapping a particular speed and duplex
- * combination to a particular SUPPORTED and ADVERTISED value
- */
-struct phy_setting {
-	int speed;
-	int duplex;
-	int bit;
-};
-
-/* A mapping of all SUPPORTED settings to speed/duplex.  This table
- * must be grouped by speed and sorted in descending match priority
- * - iow, descending speed. */
-static const struct phy_setting settings[] = {
-	{
-		.speed = SPEED_10000,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
-	},
-	{
-		.speed = SPEED_10000,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
-	},
-	{
-		.speed = SPEED_10000,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
-	},
-	{
-		.speed = SPEED_2500,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
-	},
-	{
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
-	},
-	{
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-	},
-	{
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_HALF,
-		.bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-	},
-	{
-		.speed = SPEED_100,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
-	},
-	{
-		.speed = SPEED_100,
-		.duplex = DUPLEX_HALF,
-		.bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
-	},
-	{
-		.speed = SPEED_10,
-		.duplex = DUPLEX_FULL,
-		.bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
-	},
-	{
-		.speed = SPEED_10,
-		.duplex = DUPLEX_HALF,
-		.bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
-	},
-};
-
-/**
- * phy_lookup_setting - lookup a PHY setting
- * @speed: speed to match
- * @duplex: duplex to match
- * @mask: allowed link modes
- * @maxbit: bit size of link modes
- * @exact: an exact match is required
- *
- * Search the settings array for a setting that matches the speed and
- * duplex, and which is supported.
- *
- * If @exact is unset, either an exact match or %NULL for no match will
- * be returned.
- *
- * If @exact is set, an exact match, the fastest supported setting at
- * or below the specified speed, the slowest supported setting, or if
- * they all fail, %NULL will be returned.
- */
-static const struct phy_setting *
-phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
-		   size_t maxbit, bool exact)
-{
-	const struct phy_setting *p, *match = NULL, *last = NULL;
-	int i;
-
-	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
-		if (p->bit < maxbit && test_bit(p->bit, mask)) {
-			last = p;
-			if (p->speed == speed && p->duplex == duplex) {
-				/* Exact match for speed and duplex */
-				match = p;
-				break;
-			} else if (!exact) {
-				if (!match && p->speed <= speed)
-					/* Candidate */
-					match = p;
-
-				if (p->speed < speed)
-					break;
-			}
-		}
-	}
-
-	if (!match && !exact)
-		match = last;
-
-	return match;
-}
-
 /**
  * phy_find_valid - find a PHY setting that matches the requested parameters
  * @speed: desired speed
@@ -290,6 +171,25 @@ phy_find_valid(int speed, int duplex, u3
 }
 
 /**
+ * phy_supported_speeds - return all speeds currently supported by a phy device
+ * @phy: The phy device to return supported speeds of.
+ * @speeds: buffer to store supported speeds in.
+ * @size:   size of speeds buffer.
+ *
+ * Description: Returns the number of supported speeds, and fills the speeds
+ * buffer with the supported speeds. If speeds buffer is too small to contain
+ * all currently supported speeds, will return as many speeds as can fit.
+ */
+unsigned int phy_supported_speeds(struct phy_device *phy,
+				  unsigned int *speeds,
+				  unsigned int size)
+{
+	unsigned long supported = phy->supported;
+
+	return phy_speeds(speeds, size, &supported, BITS_PER_LONG);
+}
+
+/**
  * phy_check_valid - check if there is a valid PHY setting which matches
  *		     speed, duplex, and feature mask
  * @speed: speed to match
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -42,6 +42,132 @@ const char *phy_duplex_to_str(unsigned i
 }
 EXPORT_SYMBOL_GPL(phy_duplex_to_str);
 
+/* A mapping of all SUPPORTED settings to speed/duplex.  This table
+ * must be grouped by speed and sorted in descending match priority
+ * - iow, descending speed. */
+static const struct phy_setting settings[] = {
+	{
+		.speed = SPEED_10000,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+	},
+	{
+		.speed = SPEED_10000,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+	},
+	{
+		.speed = SPEED_10000,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+	},
+	{
+		.speed = SPEED_2500,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_HALF,
+		.bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+	},
+	{
+		.speed = SPEED_100,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+	},
+	{
+		.speed = SPEED_100,
+		.duplex = DUPLEX_HALF,
+		.bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+	},
+	{
+		.speed = SPEED_10,
+		.duplex = DUPLEX_FULL,
+		.bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+	},
+	{
+		.speed = SPEED_10,
+		.duplex = DUPLEX_HALF,
+		.bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+	},
+};
+
+/**
+ * phy_lookup_setting - lookup a PHY setting
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @mask: allowed link modes
+ * @maxbit: bit size of link modes
+ * @exact: an exact match is required
+ *
+ * Search the settings array for a setting that matches the speed and
+ * duplex, and which is supported.
+ *
+ * If @exact is unset, either an exact match or %NULL for no match will
+ * be returned.
+ *
+ * If @exact is set, an exact match, the fastest supported setting at
+ * or below the specified speed, the slowest supported setting, or if
+ * they all fail, %NULL will be returned.
+ */
+const struct phy_setting *
+phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
+		   size_t maxbit, bool exact)
+{
+	const struct phy_setting *p, *match = NULL, *last = NULL;
+	int i;
+
+	for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
+		if (p->bit < maxbit && test_bit(p->bit, mask)) {
+			last = p;
+			if (p->speed == speed && p->duplex == duplex) {
+				/* Exact match for speed and duplex */
+				match = p;
+				break;
+			} else if (!exact) {
+				if (!match && p->speed <= speed)
+					/* Candidate */
+					match = p;
+
+				if (p->speed < speed)
+					break;
+			}
+		}
+	}
+
+	if (!match && !exact)
+		match = last;
+
+	return match;
+}
+EXPORT_SYMBOL_GPL(phy_lookup_setting);
+
+size_t phy_speeds(unsigned int *speeds, size_t size,
+		  unsigned long *mask, size_t maxbit)
+{
+	size_t count;
+	int i;
+
+	for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
+		if (settings[i].bit < maxbit &&
+		    test_bit(settings[i].bit, mask) &&
+		    (count == 0 || speeds[count - 1] != settings[i].speed))
+			speeds[count++] = settings[i].speed;
+
+	return count;
+}
+
 static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
 				    int addr)
 {
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -644,6 +644,21 @@ struct phy_fixup {
 const char *phy_speed_to_str(int speed);
 const char *phy_duplex_to_str(unsigned int duplex);
 
+/* A structure for mapping a particular speed and duplex
+ * combination to a particular SUPPORTED and ADVERTISED value
+ */
+struct phy_setting {
+	u32 speed;
+	u8 duplex;
+	u8 bit;
+};
+
+const struct phy_setting *
+phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
+		   size_t maxbit, bool exact);
+size_t phy_speeds(unsigned int *speeds, size_t size,
+		  unsigned long *mask, size_t maxbit);
+
 /**
  * phy_read_mmd - Convenience function for reading a register
  * from an MMD on a given PHY.