1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
model = "D-Link DGS-1210-10P";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_disable_sys_led>;
compatible = "gpio-leds";
led_power: power {
// GPIO 0 seems to provide power to the leds
label = "green:power";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
/* is this pin 30 on the external RTL8231 (&gpio1)? */
/*mode {
label = "reset";
gpios = <&gpio0 94 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};*/
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x00080000 0x40000>;
read-only;
};
partition@c0000 {
label = "u-boot-env2";
reg = <0x000c0000 0x40000>;
};
partition@280000 {
label = "firmware";
compatible = "denx,uimage";
reg = <0x00100000 0xd80000>;
};
partition@be80000 {
label = "kernel2";
reg = <0x00e80000 0x180000>;
};
partition@1000000 {
label = "sysinfo";
reg = <0x01000000 0x40000>;
};
partition@1040000 {
label = "rootfs2";
reg = <0x01040000 0xc00000>;
};
partition@1c40000 {
label = "jffs2";
reg = <0x01c40000 0x3c0000>;
};
};
};
};
&uart1 {
status = "okay";
};
ðernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <ðernet0>;
#address-cells = <1>;
#size-cells = <0>;
INTERNAL_PHY(8)
INTERNAL_PHY(9)
INTERNAL_PHY(10)
INTERNAL_PHY(11)
INTERNAL_PHY(12)
INTERNAL_PHY(13)
INTERNAL_PHY(14)
INTERNAL_PHY(15)
INTERNAL_PHY(24)
INTERNAL_PHY(26)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(8, 1, internal)
SWITCH_PORT(9, 2, internal)
SWITCH_PORT(10, 3, internal)
SWITCH_PORT(11, 4, internal)
SWITCH_PORT(12, 5, internal)
SWITCH_PORT(13, 6, internal)
SWITCH_PORT(14, 7, internal)
SWITCH_PORT(15, 8, internal)
SWITCH_SFP_PORT(24, 9, rgmii-id)
SWITCH_SFP_PORT(26, 10, rgmii-id)
port@28 {
ethernet = <ðernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
|
