Adds support for USB device functionality for AT90USB and

ATU2/U4 series devices.

Support tested on a PJRC TEENSY2++ board with AT90USB1286.

Signed-off-by: Rob Lippert <roblip@gmail.com>



git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9487 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 90 insertions, 0 deletions

diff --git a/demos/AVR/RT-TEENSY2-USB/mcuconf.h b/demos/AVR/RT-TEENSY2-USB/mcuconf.h
new file mode 100644
index 000000000..c5a784bd1
--- /dev/null
+++ b/demos/AVR/RT-TEENSY2-USB/mcuconf.h
@@ -0,0 +1,90 @@
+/*
+    Copyright (C) 2015 Robert Lippert
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H_
+#define MCUCONF_H_
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART0              FALSE
+#define AVR_SERIAL_USE_USART1              TRUE
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+/*
+ * USB driver system settings.
+ */
+#define AVR_USB_USE_USB1                   TRUE
+#define AVR_USB_USE_NAMED_ADDRESS_SPACES   FALSE
+
+#endif /* MCUCONF_H_ */