diff options
Diffstat (limited to 'os/hal/platforms/LPC11xx/hal_lld.c')
| -rw-r--r-- | os/hal/platforms/LPC11xx/hal_lld.c | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/os/hal/platforms/LPC11xx/hal_lld.c b/os/hal/platforms/LPC11xx/hal_lld.c new file mode 100644 index 000000000..af14d406a --- /dev/null +++ b/os/hal/platforms/LPC11xx/hal_lld.c @@ -0,0 +1,120 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file LPC11xx/hal_lld.c
+ * @brief LPC11xx HAL subsystem low level driver source.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+/**
+ * @brief Register missing in NXP header file.
+ */
+#define FLASHCFG (*((volatile uint32_t *)0x4003C010))
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+
+ /* SysTick initialization using the system clock.*/
+ nvicSetSystemHandlerPriority(HANDLER_SYSTICK, CORTEX_PRIORITY_SYSTICK);
+ SysTick->LOAD = LPC11xx_SYSCLK / CH_FREQUENCY - 1;
+ SysTick->VAL = 0;
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk |
+ SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+ * @brief LPC11xx clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ * @note This function must be invoked only after the system reset.
+ *
+ * @special
+ */
+void lpc111x_clock_init(void) {
+ unsigned i;
+
+ /* Flash wait states setting, the code takes care to not touch TBD bits.*/
+ FLASHCFG = (FLASHCFG & ~3) | LPC11xx_FLASHCFG_FLASHTIM;
+
+ /* System oscillator initialization if required.*/
+#if LPC11xx_MAINCLK_SOURCE == SYSMAINCLKSEL_PLLOUT
+#if LPC11xx_PLLCLK_SOURCE == SYSPLLCLKSEL_SYSOSC
+ LPC_SYSCON->SYSOSCCTRL = LPC11xx_SYSOSCCTRL;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* System oscillator ON. */
+ for (i = 0; i < 200; i++)
+ __NOP(); /* Stabilization delay. */
+#endif /* LPC11xx_PLLCLK_SOURCE == SYSPLLCLKSEL_SYSOSC */
+
+ /* PLL initialization if required.*/
+ LPC_SYSCON->SYSPLLCLKSEL = LPC11xx_PLLCLK_SOURCE;
+ LPC_SYSCON->SYSPLLCLKUEN = 1; /* Really required? */
+ LPC_SYSCON->SYSPLLCLKUEN = 0;
+ LPC_SYSCON->SYSPLLCLKUEN = 1;
+ LPC_SYSCON->SYSPLLCTRL = LPC11xx_SYSPLLCTRL_MSEL | LPC11xx_SYSPLLCTRL_PSEL;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* System PLL ON. */
+ while ((LPC_SYSCON->SYSPLLSTAT & 1) == 0) /* Wait PLL lock. */
+ ;
+#endif /* LPC11xx_MAINCLK_SOURCE == SYSMAINCLKSEL_PLLOUT */
+
+ /* Main clock source selection.*/
+ LPC_SYSCON->MAINCLKSEL = LPC11xx_MAINCLK_SOURCE;
+ LPC_SYSCON->MAINCLKUEN = 1; /* Really required? */
+ LPC_SYSCON->MAINCLKUEN = 0;
+ LPC_SYSCON->MAINCLKUEN = 1;
+ while ((LPC_SYSCON->MAINCLKUEN & 1) == 0) /* Wait switch completion. */
+ ;
+
+ /* ABH divider initialization, peripheral clocks are initially disabled,
+ the various device drivers will handle their own setup except GPIO and
+ IOCON that are left enabled.*/
+ LPC_SYSCON->SYSAHBCLKDIV = LPC11xx_SYSABHCLK_DIV;
+ LPC_SYSCON->SYSAHBCLKCTRL = 0x0001005F;
+
+ /* Memory remapping, vectors always in ROM.*/
+ LPC_SYSCON->SYSMEMREMAP = 2;
+}
+
+/** @} */
|