diff options
| author | skullydazed <skullydazed@users.noreply.github.com> | 2017-09-29 16:17:30 -0700 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2017-09-29 16:17:30 -0700 |
| commit | 5fd68266f5d90b2c7045f44f678d71b782907752 (patch) | |
| tree | 443e70a3f0dcebadd39a0c96857130546cc690a7 /keyboards/cluepad/rules.mk | |
| parent | b736f25e85171fceb06f01cf45a45f84dd0a4911 (diff) | |
| download | firmware-5fd68266f5d90b2c7045f44f678d71b782907752.tar.gz firmware-5fd68266f5d90b2c7045f44f678d71b782907752.tar.bz2 firmware-5fd68266f5d90b2c7045f44f678d71b782907752.zip | |
Clueboard 60% support (#1746)
* initial clueboard_60 support
* LED lighting support
* fix the clueboard->clueboard_66 rename
* Add layout support to clueboard_60
* Fix the 60_iso layout so it's actually iso
* add a default keymap for AEK layout
* fix clueboard_17
* Fixup the ISO layouts
* Fix the `wait_ms()/wait_us()` definitions for chibios
* Fix up the wait_ms/wait_us hack. Reduce stack size.
* Add a missing #include "wait.h"
* commit files that should have already been comitted
Diffstat (limited to 'keyboards/cluepad/rules.mk')
| -rw-r--r-- | keyboards/cluepad/rules.mk | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk deleted file mode 100644 index 264aba044..000000000 --- a/keyboards/cluepad/rules.mk +++ /dev/null @@ -1,65 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -# EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality -RGBLIGHT_ENABLE = yes -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file |