Add missing SVN eol-style properties to source files to prevent mixed end-of-line characters.

1 files changed, 267 insertions, 267 deletions

diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
index 3cb2f530d..69202f7cd 100644
--- a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
+++ b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c
@@ -1,267 +1,267 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2011.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks

- *  of the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "AndroidAccessoryHost.h"

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-	sei();

-

-	for (;;)

-	{

-		Android_Host_Task();

-		USB_USBTask();

-	}

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	Serial_Init(9600, false);

-	LEDs_Init();

-	USB_Init();

-

-	/* Create a stdio stream for the serial port for stdin and stdout */

-	Serial_CreateStream(NULL);

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)

-{

-	USB_Disable();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,

-                                            const uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

-/** Task to set the configuration of the attached device after it has been enumerated. */

-void Android_Host_Task(void)

-{

-	uint8_t ErrorCode;

-

-	switch (USB_HostState)

-	{

-		case HOST_STATE_Addressed:

-			puts_P(PSTR("Getting Device Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			ErrorCode = ProcessDeviceDescriptor();

-			

-			/* Save whether the Android device needs to be mode-switched later on */

-			bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);

-			

-			/* Error out if the device is not an Android device or an error occurred */

-			if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))

-			{

-				if (ErrorCode == DevControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));

-

-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */

-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-			

-			/* Check if a valid Android device was attached, but it is not current in Accessory mode */

-			if (RequiresModeSwitch)

-			{

-				USB_ControlRequest = (USB_Request_Header_t)

-				{

-					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),

-					.bRequest      = ANDROID_Req_StartAccessoryMode,

-					.wValue        = 0,

-					.wIndex        = 0,

-					.wLength       = 0,

-				};

-

-				/* Send the control request for the Android device to switch to accessory mode */

-				Pipe_SelectPipe(PIPE_CONTROLPIPE);

-				USB_Host_SendControlRequest(NULL);

-			

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			puts_P(PSTR("Getting Config Data.\r\n"));

-

-			/* Get and process the configuration descriptor data */

-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)

-			{

-				if (ErrorCode == ControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDS_LED1);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));

-

-			USB_HostState = HOST_STATE_Configured;

-			break;

-		case HOST_STATE_Configured:

-			/* Select the data IN pipe */

-			Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);

-			Pipe_Unfreeze();

-

-			/* Check to see if a packet has been received */

-			if (Pipe_IsINReceived())

-			{

-				/* Re-freeze IN pipe after the packet has been received */

-				Pipe_Freeze();

-

-				/* Check if data is in the pipe */

-				if (Pipe_IsReadWriteAllowed())

-				{

-					uint8_t NextReceivedByte = Pipe_BytesInPipe();

-					uint8_t LEDMask          = LEDS_NO_LEDS;

-

-					if (NextReceivedByte & 0x01)

-						LEDMask |= LEDS_LED1;

-

-					if (NextReceivedByte & 0x02)

-						LEDMask |= LEDS_LED2;

-

-					if (NextReceivedByte & 0x04)

-						LEDMask |= LEDS_LED3;

-

-					if (NextReceivedByte & 0x08)

-						LEDMask |= LEDS_LED4;

-

-					LEDs_SetAllLEDs(LEDMask);

-				}

-				else

-				{

-					/* Clear the pipe after all data in the packet has been read, ready for the next packet */

-					Pipe_ClearIN();

-				}

-			}

-

-			/* Re-freeze IN pipe after use */

-			Pipe_Freeze();

-			break;			

-	}

-}

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2011.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks
+ *  of the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "AndroidAccessoryHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		Android_Host_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	Serial_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+
+	/* Create a stdio stream for the serial port for stdin and stdout */
+	Serial_CreateStream(NULL);
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_Disable();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+                                            const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to set the configuration of the attached device after it has been enumerated. */
+void Android_Host_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Device Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			ErrorCode = ProcessDeviceDescriptor();
+			
+			/* Save whether the Android device needs to be mode-switched later on */
+			bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
+			
+			/* Error out if the device is not an Android device or an error occurred */
+			if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))
+			{
+				if (ErrorCode == DevControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
+
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Check if a valid Android device was attached, but it is not current in Accessory mode */
+			if (RequiresModeSwitch)
+			{
+				USB_ControlRequest = (USB_Request_Header_t)
+				{
+					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
+					.bRequest      = ANDROID_Req_StartAccessoryMode,
+					.wValue        = 0,
+					.wIndex        = 0,
+					.wLength       = 0,
+				};
+
+				/* Send the control request for the Android device to switch to accessory mode */
+				Pipe_SelectPipe(PIPE_CONTROLPIPE);
+				USB_Host_SendControlRequest(NULL);
+			
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Getting Config Data.\r\n"));
+
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDS_LED1);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Select the data IN pipe */
+			Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
+			Pipe_Unfreeze();
+
+			/* Check to see if a packet has been received */
+			if (Pipe_IsINReceived())
+			{
+				/* Re-freeze IN pipe after the packet has been received */
+				Pipe_Freeze();
+
+				/* Check if data is in the pipe */
+				if (Pipe_IsReadWriteAllowed())
+				{
+					uint8_t NextReceivedByte = Pipe_BytesInPipe();
+					uint8_t LEDMask          = LEDS_NO_LEDS;
+
+					if (NextReceivedByte & 0x01)
+						LEDMask |= LEDS_LED1;
+
+					if (NextReceivedByte & 0x02)
+						LEDMask |= LEDS_LED2;
+
+					if (NextReceivedByte & 0x04)
+						LEDMask |= LEDS_LED3;
+
+					if (NextReceivedByte & 0x08)
+						LEDMask |= LEDS_LED4;
+
+					LEDs_SetAllLEDs(LEDMask);
+				}
+				else
+				{
+					/* Clear the pipe after all data in the packet has been read, ready for the next packet */
+					Pipe_ClearIN();
+				}
+			}
+
+			/* Re-freeze IN pipe after use */
+			Pipe_Freeze();
+			break;			
+	}
+}
+