diff options
Diffstat (limited to 'Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c')
-rw-r--r-- | Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c | 534 |
1 files changed, 267 insertions, 267 deletions
diff --git a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c index 3cb2f530d..69202f7cd 100644 --- a/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c +++ b/Demos/Host/Incomplete/AndroidAccessoryHost/AndroidAccessoryHost.c @@ -1,267 +1,267 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2011.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the AndroidAccessoryHost demo. This file contains the main tasks
- * of the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AndroidAccessoryHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
- SetupHardware();
-
- puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- sei();
-
- for (;;)
- {
- Android_Host_Task();
- USB_USBTask();
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- Serial_Init(9600, false);
- LEDs_Init();
- USB_Init();
-
- /* Create a stdio stream for the serial port for stdin and stdout */
- Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- * stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- * enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
- USB_Disable();
-
- printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
- " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- * enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
- const uint8_t SubErrorCode)
-{
- printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
- " -- Error Code %d\r\n"
- " -- Sub Error Code %d\r\n"
- " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated. */
-void Android_Host_Task(void)
-{
- uint8_t ErrorCode;
-
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- puts_P(PSTR("Getting Device Data.\r\n"));
-
- /* Get and process the configuration descriptor data */
- ErrorCode = ProcessDeviceDescriptor();
-
- /* Save whether the Android device needs to be mode-switched later on */
- bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
-
- /* Error out if the device is not an Android device or an error occurred */
- if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))
- {
- if (ErrorCode == DevControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDS_LED1);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
-
- /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
- if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDS_LED1);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- /* Check if a valid Android device was attached, but it is not current in Accessory mode */
- if (RequiresModeSwitch)
- {
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
- .bRequest = ANDROID_Req_StartAccessoryMode,
- .wValue = 0,
- .wIndex = 0,
- .wLength = 0,
- };
-
- /* Send the control request for the Android device to switch to accessory mode */
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- USB_Host_SendControlRequest(NULL);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("Getting Config Data.\r\n"));
-
- /* Get and process the configuration descriptor data */
- if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
- {
- if (ErrorCode == ControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDS_LED1);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
-
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- /* Select the data IN pipe */
- Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
- Pipe_Unfreeze();
-
- /* Check to see if a packet has been received */
- if (Pipe_IsINReceived())
- {
- /* Re-freeze IN pipe after the packet has been received */
- Pipe_Freeze();
-
- /* Check if data is in the pipe */
- if (Pipe_IsReadWriteAllowed())
- {
- uint8_t NextReceivedByte = Pipe_BytesInPipe();
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- if (NextReceivedByte & 0x01)
- LEDMask |= LEDS_LED1;
-
- if (NextReceivedByte & 0x02)
- LEDMask |= LEDS_LED2;
-
- if (NextReceivedByte & 0x04)
- LEDMask |= LEDS_LED3;
-
- if (NextReceivedByte & 0x08)
- LEDMask |= LEDS_LED4;
-
- LEDs_SetAllLEDs(LEDMask);
- }
- else
- {
- /* Clear the pipe after all data in the packet has been read, ready for the next packet */
- Pipe_ClearIN();
- }
- }
-
- /* Re-freeze IN pipe after use */
- Pipe_Freeze();
- break;
- }
-}
-
+/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the AndroidAccessoryHost demo. This file contains the main tasks + * of the demo and is responsible for the initial application hardware configuration. + */ + +#include "AndroidAccessoryHost.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE)); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + sei(); + + for (;;) + { + Android_Host_Task(); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + Serial_Init(9600, false); + LEDs_Init(); + USB_Init(); + + /* Create a stdio stream for the serial port for stdin and stdout */ + Serial_CreateStream(NULL); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) +{ + USB_Disable(); + + printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" + " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) +{ + printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" + " -- Error Code %d\r\n" + " -- Sub Error Code %d\r\n" + " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + +/** Task to set the configuration of the attached device after it has been enumerated. */ +void Android_Host_Task(void) +{ + uint8_t ErrorCode; + + switch (USB_HostState) + { + case HOST_STATE_Addressed: + puts_P(PSTR("Getting Device Data.\r\n")); + + /* Get and process the configuration descriptor data */ + ErrorCode = ProcessDeviceDescriptor(); + + /* Save whether the Android device needs to be mode-switched later on */ + bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice); + + /* Error out if the device is not an Android device or an error occurred */ + if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch)) + { + if (ErrorCode == DevControlError) + puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n")); + else + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); + + printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDS_LED1); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : "")); + + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ + if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDS_LED1); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + /* Check if a valid Android device was attached, but it is not current in Accessory mode */ + if (RequiresModeSwitch) + { + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE), + .bRequest = ANDROID_Req_StartAccessoryMode, + .wValue = 0, + .wIndex = 0, + .wLength = 0, + }; + + /* Send the control request for the Android device to switch to accessory mode */ + Pipe_SelectPipe(PIPE_CONTROLPIPE); + USB_Host_SendControlRequest(NULL); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + puts_P(PSTR("Getting Config Data.\r\n")); + + /* Get and process the configuration descriptor data */ + if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) + { + if (ErrorCode == ControlError) + puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); + else + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); + + printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + /* Indicate error via status LEDs */ + LEDs_SetAllLEDs(LEDS_LED1); + + /* Wait until USB device disconnected */ + USB_HostState = HOST_STATE_WaitForDeviceRemoval; + break; + } + + puts_P(PSTR("Accessory Mode Android Enumerated.\r\n")); + + USB_HostState = HOST_STATE_Configured; + break; + case HOST_STATE_Configured: + /* Select the data IN pipe */ + Pipe_SelectPipe(ANDROID_DATA_IN_PIPE); + Pipe_Unfreeze(); + + /* Check to see if a packet has been received */ + if (Pipe_IsINReceived()) + { + /* Re-freeze IN pipe after the packet has been received */ + Pipe_Freeze(); + + /* Check if data is in the pipe */ + if (Pipe_IsReadWriteAllowed()) + { + uint8_t NextReceivedByte = Pipe_BytesInPipe(); + uint8_t LEDMask = LEDS_NO_LEDS; + + if (NextReceivedByte & 0x01) + LEDMask |= LEDS_LED1; + + if (NextReceivedByte & 0x02) + LEDMask |= LEDS_LED2; + + if (NextReceivedByte & 0x04) + LEDMask |= LEDS_LED3; + + if (NextReceivedByte & 0x08) + LEDMask |= LEDS_LED4; + + LEDs_SetAllLEDs(LEDMask); + } + else + { + /* Clear the pipe after all data in the packet has been read, ready for the next packet */ + Pipe_ClearIN(); + } + } + + /* Re-freeze IN pipe after use */ + Pipe_Freeze(); + break; + } +} + |