Minor documentation improvements.

5 files changed, 53 insertions, 53 deletions

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 2c0ca6ed6..2e396ed55 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -100,61 +100,61 @@
 		/* Macros: */
 			/** \name SPI Prescaler Configuration Masks */
 			//@{
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 2. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
 			#define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 4. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 4. */
 			#define SPI_SPEED_FCPU_DIV_4           0
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 8. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 8. */
 			#define SPI_SPEED_FCPU_DIV_8           (SPI_USE_DOUBLESPEED | (1 << SPR0))
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 16. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 16. */
 			#define SPI_SPEED_FCPU_DIV_16          (1 << SPR0)
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 32. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 32. */
 			#define SPI_SPEED_FCPU_DIV_32          (SPI_USE_DOUBLESPEED | (1 << SPR1))
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 64. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 64. */
 			#define SPI_SPEED_FCPU_DIV_64          (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0))
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 128. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
 			#define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))
 			//@}
 
 			/** \name SPI SCK Polarity Configuration Masks */
 			//@{
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
 			#define SPI_SCK_LEAD_RISING            (0 << CPOL)
 
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the falling edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
 			#define SPI_SCK_LEAD_FALLING           (1 << CPOL)
 			//@}
 
 			/** \name SPI Sample Edge Configuration Masks */
 			//@{
-			/** SPI data sample mode mask for \c SPI_Init(). Indicates that the data should sampled on the leading edge. */
+			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
 			#define SPI_SAMPLE_LEADING             (0 << CPHA)
 
-			/** SPI data sample mode mask for \c SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
 			#define SPI_SAMPLE_TRAILING            (1 << CPHA)
 			//@}
 
 			/** \name SPI Data Ordering Configuration Masks */
 			//@{
-			/** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out MSB first. */
+			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
 			#define SPI_ORDER_MSB_FIRST            (0 << DORD)
 
-			/** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out LSB first. */
+			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
 			#define SPI_ORDER_LSB_FIRST            (1 << DORD)
 			//@}
 
 			/** \name SPI Mode Configuration Masks */
 			//@{
-			/** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
+			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
 			#define SPI_MODE_SLAVE                 (0 << MSTR)
 
-			/** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
+			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
 			#define SPI_MODE_MASTER                (1 << MSTR)
 			//@}
 
diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
index fe108e500..0126630ac 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
@@ -29,7 +29,7 @@
 */
 
 /** \file
- *  \brief Serial USART Master SPI Mode Peripheral Driver (XMEGA)
+ *  \brief Master SPI Mode Serial USART Peripheral Driver (XMEGA)
  *
  *  On-chip Master SPI mode USART driver for the XMEGA AVR microcontrollers.
  *
@@ -38,7 +38,7 @@
  */
 
 /** \ingroup Group_SerialSPI
- *  \defgroup Group_SerialSPI_AVR8 Serial USART Peripheral Driver (AVR8)
+ *  \defgroup Group_SerialSPI_AVR8 Master SPI Mode Serial USART Peripheral Driver (AVR8)
  *
  *  \section Sec_ModDescription Module Description
  *  On-chip serial USART driver for the 8-bit AVR8 microcontrollers.
@@ -98,28 +98,28 @@
 		/* Macros: */
 			/** \name SPI SCK Polarity Configuration Masks */
 			//@{
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
 			#define USART_SPI_SCK_LEAD_RISING            (0 << UCPOL)
 
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the falling edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
 			#define USART_SPI_SCK_LEAD_FALLING           (1 << UCPOL)
 			//@}
 
 			/** \name SPI Sample Edge Configuration Masks */
 			//@{
-			/** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
+			/** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
 			#define USART_SPI_SAMPLE_LEADING             (0 << UPCHA)
 
-			/** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			/** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
 			#define USART_SPI_SAMPLE_TRAILING            (1 << UPCHA)
 			//@}
 
 			/** \name SPI Data Ordering Configuration Masks */
 			//@{
-			/** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out MSB first. */
+			/** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
 			#define USART_SPI_ORDER_MSB_FIRST            (0 << UDORD)
 
-			/** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out LSB first. */
+			/** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
 			#define USART_SPI_ORDER_LSB_FIRST            (1 << UDORD)
 			//@}			
 
diff --git a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
index dac684f44..a21ac1ca8 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
@@ -97,61 +97,61 @@
 		/* Macros: */
 			/** \name SPI Prescaler Configuration Masks */
 			//@{
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 2. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
 			#define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 4. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 4. */
 			#define SPI_SPEED_FCPU_DIV_4           0
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 8. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 8. */
 			#define SPI_SPEED_FCPU_DIV_8           (SPI_USE_DOUBLESPEED | (1 << SPI_PRESCALER_gp))
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 16. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 16. */
 			#define SPI_SPEED_FCPU_DIV_16          (1 << SPI_PRESCALER_gp)
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 32. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 32. */
 			#define SPI_SPEED_FCPU_DIV_32          (SPI_USE_DOUBLESPEED | (2 << SPI_PRESCALER_gp))
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 64. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 64. */
 			#define SPI_SPEED_FCPU_DIV_64          (2 << SPI_PRESCALER_gp)
 
-			/** SPI prescaler mask for \c SPI_Init(). Divides the system clock by a factor of 128. */
+			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
 			#define SPI_SPEED_FCPU_DIV_128         (3 << SPI_PRESCALER_gp)
 			//@}
 
 			/** \name SPI SCK Polarity Configuration Masks */
 			//@{
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
 			#define SPI_SCK_LEAD_RISING            0
 
-			/** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the falling edge. */
+			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
 			#define SPI_SCK_LEAD_FALLING           SPI_MODE1_bm
 			//@}
 
 			/** \name SPI Sample Edge Configuration Masks */
 			//@{
-			/** SPI data sample mode mask for \c SPI_Init(). Indicates that the data should sampled on the leading edge. */
+			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
 			#define SPI_SAMPLE_LEADING             0
 
-			/** SPI data sample mode mask for \c SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
 			#define SPI_SAMPLE_TRAILING            SPI_MODE0_bm
 			//@}
 
 			/** \name SPI Data Ordering Configuration Masks */
 			//@{
-			/** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out MSB first. */
+			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
 			#define SPI_ORDER_MSB_FIRST            0
 
-			/** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out LSB first. */
+			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
 			#define SPI_ORDER_LSB_FIRST            SPI_DORD_bm
 			//@}
 
 			/** \name SPI Mode Configuration Masks */
 			//@{
-			/** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
+			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
 			#define SPI_MODE_SLAVE                 0
 
-			/** SPI mode mask for \c SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
+			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
 			#define SPI_MODE_MASTER                SPI_MASTER_bm
 			//@}
 
diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
index 7d1e6c1f3..6f8251f60 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
@@ -29,7 +29,7 @@
 */
 
 /** \file
- *  \brief Serial USART Master SPI Mode Peripheral Driver (XMEGA)
+ *  \brief Master SPI Mode Serial USART Peripheral Driver (XMEGA)
  *
  *  On-chip Master SPI mode USART driver for the XMEGA AVR microcontrollers.
  *
@@ -38,7 +38,7 @@
  */
 
 /** \ingroup Group_SerialSPI
- *  \defgroup Group_SerialSPI_XMEGA Serial USART Peripheral Driver (XMEGA)
+ *  \defgroup Group_SerialSPI_XMEGA Master SPI Mode Serial USART Peripheral Driver (XMEGA)
  *
  *  \section Sec_ModDescription Module Description
  *  On-chip serial USART driver for the XMEGA AVR microcontrollers.
@@ -52,12 +52,12 @@
  *
  *  \code
  *      // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
- *      SerialSPI_Init(&USARTD, (USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
+ *      SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
  *
  *      // Send several bytes, ignoring the returned data
- *      SerialSPI_SendByte(&USARTD, 0x01);
- *      SerialSPI_SendByte(&USARTD, 0x02);
- *      SerialSPI_SendByte(&USARTD, 0x03);
+ *      SerialSPI_SendByte(&USARTD0, 0x01);
+ *      SerialSPI_SendByte(&USARTD0, 0x02);
+ *      SerialSPI_SendByte(&USARTD0, 0x03);
  *
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SerialSPI_ReceiveByte(&USARTD);
@@ -65,7 +65,7 @@
  *      uint8_t Byte3 = SerialSPI_ReceiveByte(&USARTD);
  *
  *      // Send a byte, and store the received byte from the same transaction
- *      uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD, 0xDC);
+ *      uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD0, 0xDC);
  *  \endcode
  *
  *  @{
@@ -98,25 +98,25 @@
 		/* Macros: */
 			/** \name SPI SCK Polarity Configuration Masks */
 			//@{
-			/** SPI clock polarity mask for \c SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			/** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
 			#define USART_SPI_SCK_LEAD_RISING      0
 			//@}
 
 			/** \name SPI Sample Edge Configuration Masks */
 			//@{
-			/** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
+			/** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
 			#define USART_SPI_SAMPLE_LEADING       0
 
-			/** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			/** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
 			#define USART_SPI_SAMPLE_TRAILING      USART_UPCHA_bm
 			//@}
 
 			/** \name SPI Data Ordering Configuration Masks */
 			//@{
-			/** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out MSB first. */
+			/** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
 			#define USART_SPI_ORDER_MSB_FIRST      0
 
-			/** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out LSB first. */
+			/** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
 			#define USART_SPI_ORDER_LSB_FIRST      USART_UDORD_bm
 			//@}			
 
diff --git a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
index 8dd7844b5..7385c8080 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
@@ -52,13 +52,13 @@
  *
  *  \code
  *      // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
- *      Serial_Init(&USARTD, 9600, false);
+ *      Serial_Init(&USARTD0, 9600, false);
  *
  *      // Send a string through the USART
- *      Serial_TxString(&USARTD, "Test String\r\n");
+ *      Serial_TxString(&USARTD0, "Test String\r\n");
  *
  *      // Receive a byte through the USART
- *      uint8_t DataByte = Serial_RxByte(&USARTD);
+ *      uint8_t DataByte = Serial_RxByte(&USARTD0);
  *  \endcode
  *
  *  @{