aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA
diff options
context:
space:
mode:
authorDean Camera <dean@fourwalledcubicle.com>2011-06-01 14:33:40 +0000
committerDean Camera <dean@fourwalledcubicle.com>2011-06-01 14:33:40 +0000
commitf01a05415c03b0dd61297849ece2cfcce7f8d3e8 (patch)
treee46fd811bc29edaa3764a2d2a89e760621c8f794 /LUFA
parent6d2a08f1b77208de1f71dd4035d21f13e3f90462 (diff)
downloadlufa-f01a05415c03b0dd61297849ece2cfcce7f8d3e8.tar.gz
lufa-f01a05415c03b0dd61297849ece2cfcce7f8d3e8.tar.bz2
lufa-f01a05415c03b0dd61297849ece2cfcce7f8d3e8.zip
Spell check library source code files.
Diffstat (limited to 'LUFA')
-rw-r--r--LUFA/CodeTemplates/DriverStubs/Dataflash.h2
-rw-r--r--LUFA/Common/Attributes.h8
-rw-r--r--LUFA/Common/Common.h2
-rw-r--r--LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h2
-rw-r--r--LUFA/Drivers/Board/AVR8/STK525/Dataflash.h2
-rw-r--r--LUFA/Drivers/Board/AVR8/STK526/Dataflash.h2
-rw-r--r--LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h2
-rw-r--r--LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h2
-rw-r--r--LUFA/Drivers/Board/Buttons.h4
-rw-r--r--LUFA/Drivers/Board/Dataflash.h4
-rw-r--r--LUFA/Drivers/Board/Joystick.h4
-rw-r--r--LUFA/Drivers/Board/LEDs.h4
-rw-r--r--LUFA/Drivers/Board/Temperature.h4
-rw-r--r--LUFA/Drivers/Misc/RingBuffer.h2
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h4
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h4
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h2
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h8
-rw-r--r--LUFA/Drivers/USB/Class/Common/HID.h6
-rw-r--r--LUFA/Drivers/USB/Class/Common/HIDParser.h6
-rw-r--r--LUFA/Drivers/USB/Class/Host/RNDIS.h2
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h4
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h2
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h2
-rw-r--r--LUFA/Drivers/USB/Core/Endpoint.h2
-rw-r--r--LUFA/Drivers/USB/Core/Pipe.h2
-rw-r--r--LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h4
-rw-r--r--LUFA/Drivers/USB/Core/UC3/Host_UC3.h2
-rw-r--r--LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h2
-rw-r--r--LUFA/ManPages/ChangeLog.txt12
-rw-r--r--LUFA/ManPages/CompileTimeTokens.txt4
-rw-r--r--LUFA/ManPages/FutureChanges.txt2
-rw-r--r--LUFA/ManPages/MigrationInformation.txt2
33 files changed, 58 insertions, 58 deletions
diff --git a/LUFA/CodeTemplates/DriverStubs/Dataflash.h b/LUFA/CodeTemplates/DriverStubs/Dataflash.h
index 1e451b13a..372d2f2a3 100644
--- a/LUFA/CodeTemplates/DriverStubs/Dataflash.h
+++ b/LUFA/CodeTemplates/DriverStubs/Dataflash.h
@@ -79,7 +79,7 @@
#define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h
index 53cfb6df1..bb0741729 100644
--- a/LUFA/Common/Attributes.h
+++ b/LUFA/Common/Attributes.h
@@ -42,7 +42,7 @@
* \brief GCC special function/variable attribute macros.
*
* This module contains macros for applying GCC specific attributes to functions and variables to control various
- * optimiser and code generation features of the compiler. Attributes may be placed in the function prototype
+ * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype
* or variable declaration in any order, and multiple attributes can be specified for a single item via a space
* separated list.
*
@@ -85,13 +85,13 @@
*/
#define ATTR_NAKED __attribute__ ((naked))
- /** Prevents the compiler from considering a specified function for inlining. When applied, the given
- * function will not be inlined under any circumstances.
+ /** Prevents the compiler from considering a specified function for in-lining. When applied, the given
+ * function will not be in-lined under any circumstances.
*/
#define ATTR_NO_INLINE __attribute__ ((noinline))
/** Forces the compiler to inline the specified function. When applied, the given function will be
- * inlined under all circumstances.
+ * in-lined under all circumstances.
*/
#define ATTR_ALWAYS_INLINE __attribute__ ((always_inline))
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h
index 49a2bcdf1..5635a4ea9 100644
--- a/LUFA/Common/Common.h
+++ b/LUFA/Common/Common.h
@@ -163,7 +163,7 @@
#if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
/** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always
- * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimiser
+ * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
* removes/reorders code to the point where break points cannot reliably be set.
*
* \note This macro is not available for all architectures.
diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
index 9a5d98557..a1e8938d2 100644
--- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
@@ -83,7 +83,7 @@
#define DATAFLASH_PAGES 8192
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
index f1c99651a..3b5f1ed63 100644
--- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
@@ -83,7 +83,7 @@
#define DATAFLASH_PAGES 8192
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
index 1d07c9e3e..7a5feb725 100644
--- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
@@ -83,7 +83,7 @@
#define DATAFLASH_PAGES 8192
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
index 239828f84..c5be10190 100644
--- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
@@ -86,7 +86,7 @@
#define DATAFLASH_PAGES 8192
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
index 42c026906..7ecefba5a 100644
--- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
@@ -89,7 +89,7 @@
#endif
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
* The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
*/
static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index e4fe21dd0..df74b4631 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -66,7 +66,7 @@
* application.
*
* \code
- * // Initialise the button driver before first use
+ * // Initialize the button driver before first use
* Buttons_Init();
*
* printf("Waiting for button press...\r\n");
@@ -131,7 +131,7 @@
/* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
- /** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate
+ /** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate
* I/O pins to an inputs with pull-ups enabled.
*
* This must be called before any Button driver functions are used.
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index 9d68739af..99679808b 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -66,7 +66,7 @@
* application.
*
* \code
- * // Initialise the SPI and board Dataflash drivers before first use
+ * // Initialize the SPI and board Dataflash drivers before first use
* SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
* SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
* Dataflash_Init();
@@ -146,7 +146,7 @@
#define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index)
/* Inline Functions: */
- /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+ /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
*
* \note The microcontroller's SPI driver must be initialized before any of the dataflash commands are used.
*/
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 35b989dec..c517a752b 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -65,7 +65,7 @@
* application.
*
* \code
- * // Initialise the board Joystick driver before first use
+ * // Initialize the board Joystick driver before first use
* Joystick_Init();
*
* printf("Waiting for joystick movement...\r\n");
@@ -119,7 +119,7 @@
/* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
- /** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate
+ /** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
* I/O pins to inputs with their pull-ups enabled.
*/
static inline void Joystick_Init(void);
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index ac7716b43..100f85214 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -74,7 +74,7 @@
* application.
*
* \code
- * // Initialise the board LED driver before first use
+ * // Initialize the board LED driver before first use
* LEDs_Init();
*
* // Turn on each of the four LEDs in turn
@@ -187,7 +187,7 @@
/* Pseudo-Functions for Doxygen: */
#if defined(__DOXYGEN__)
- /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+ /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
* I/O pins as outputs, and sets the LEDs to default to off.
*/
static inline void LEDs_Init(void);
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index e9f310e53..b41c76290 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -53,7 +53,7 @@
* application.
*
* \code
- * // Initialise the ADC and board temperature sensor drivers before first use
+ * // Initialize the ADC and board temperature sensor drivers before first use
* ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
* Temperature_Init();
*
@@ -102,7 +102,7 @@
#define TEMP_MAX_TEMP ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET_DEGREES)
/* Inline Functions: */
- /** Initialises the temperature sensor driver, including setting up the appropriate ADC channel.
+ /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
* This must be called before any other temperature sensor routines.
*
* \pre The ADC itself (not the ADC channel) must be configured separately before calling the
diff --git a/LUFA/Drivers/Misc/RingBuffer.h b/LUFA/Drivers/Misc/RingBuffer.h
index 504029165..023cc25c4 100644
--- a/LUFA/Drivers/Misc/RingBuffer.h
+++ b/LUFA/Drivers/Misc/RingBuffer.h
@@ -66,7 +66,7 @@
* RingBuffer_t Buffer;
* uint8_t BufferData[128];
*
- * // Initialise the buffer with the created storage array
+ * // Initialize the buffer with the created storage array
* RingBuffer_InitBuffer(&Buffer, BufferData, sizeof(BufferData));
*
* // Insert some data into the buffer
diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index 99f70d14b..7a02c613a 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -53,7 +53,7 @@
* application.
*
* \code
- * // Initialise the ADC driver before first use
+ * // Initialize the ADC driver before first use
* ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
*
* // Must setup the ADC channel to read beforehand
@@ -411,7 +411,7 @@
return ADC_GetResult();
}
- /** Initialises the ADC, ready for conversions. This must be called before any other ADC operations.
+ /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
* The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
* prescaler masks.
*
diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index d800fca1a..634c54480 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -53,7 +53,7 @@
* application.
*
* \code
- * // Initialise the SPI driver before first use
+ * // Initialize the SPI driver before first use
* SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
* SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
*
@@ -159,7 +159,7 @@
//@}
/* Inline Functions: */
- /** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
+ /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
* SPI routines.
*
* \param[in] SPIOptions SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
index bb9ba856e..7f519d3ba 100644
--- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
@@ -51,7 +51,7 @@
* application.
*
* \code
- * // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode)
+ * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
* Serial_Init(9600, false);
*
* // Send a string through the USART
diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
index feac8a858..d0c78bc8d 100644
--- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
@@ -52,7 +52,7 @@
*
* <b>Low Level API Example:</b>
* \code
- * // Initialise the TWI driver before first use
+ * // Initialize the TWI driver before first use
* TWI_Init(TWI_BIT_PRESCALE_1, 10);
*
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -91,7 +91,7 @@
*
* <b>High Level API Example:</b>
* \code
- * // Initialise the TWI driver before first use
+ * // Initialize the TWI driver before first use
* TWI_Init(TWI_BIT_PRESCALE_1, 10);
*
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -171,7 +171,7 @@
/** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */
enum TWI_ErrorCodes_t
{
- TWI_ERROR_NoError = 0, /**< Indicates that the command completed sucessfully. */
+ TWI_ERROR_NoError = 0, /**< Indicates that the command completed successfully. */
TWI_ERROR_BusFault = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */
TWI_ERROR_BusCaptureTimeout = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */
TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */
@@ -180,7 +180,7 @@
};
/* Inline Functions: */
- /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
+ /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
* before any other TWI operations.
*
* The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>.
diff --git a/LUFA/Drivers/USB/Class/Common/HID.h b/LUFA/Drivers/USB/Class/Common/HID.h
index f02e709d8..a860b6569 100644
--- a/LUFA/Drivers/USB/Class/Common/HID.h
+++ b/LUFA/Drivers/USB/Class/Common/HID.h
@@ -102,7 +102,7 @@
#define HID_KEYBOARD_LED_KATANA (1 << 3)
//@}
- /** \name Keyboard Standard Report Key Scancodes */
+ /** \name Keyboard Standard Report Key Scan-codes */
//@{
#define HID_KEYBOARD_SC_ERROR_ROLLOVER 0x01
#define HID_KEYBOARD_SC_POST_FAIL 0x02
@@ -483,11 +483,11 @@
/** \hideinitializer
* A list of HID report item array elements that describe a typical Vendor Defined byte array HID report descriptor,
- * used for transporting abitrary data between the USB host and device via HID reports. The resulting report should be
+ * used for transporting arbitrary data between the USB host and device via HID reports. The resulting report should be
* a uint8_t byte array of the specified length in both Device to Host (IN) and Host to Device (OUT) directions.
*
* \param[in] VendorPageNum Vendor Defined HID Usage Page index, ranging from 0x00 to 0xFF.
- * \param[in] CollectionUsage Vendor Usage for the encompasing report IN and OUT collection, ranging from 0x00 to 0xFF.
+ * \param[in] CollectionUsage Vendor Usage for the encompassing report IN and OUT collection, ranging from 0x00 to 0xFF.
* \param[in] DataINUsage Vendor Usage for the IN report data, ranging from 0x00 to 0xFF.
* \param[in] DataOUTUsage Vendor Usage for the OUT report data, ranging from 0x00 to 0xFF.
* \param[in] NumBytes Length of the data IN and OUT reports.
diff --git a/LUFA/Drivers/USB/Class/Common/HIDParser.h b/LUFA/Drivers/USB/Class/Common/HIDParser.h
index c972665ac..e0df87e79 100644
--- a/LUFA/Drivers/USB/Class/Common/HIDParser.h
+++ b/LUFA/Drivers/USB/Class/Common/HIDParser.h
@@ -54,11 +54,11 @@
* of data exchanged between a HID device and a host, including both the physical encoding of each item
* (such as a button, key press or joystick axis) in the sent and received data packets - known as "reports" -
* as well as other information about each item such as the usages, data range, physical location and other
- * characterstics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it
- * is not forced to comply with a given report layout or featureset.
+ * characteristics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it
+ * is not forced to comply with a given report layout or feature-set.
*
* This module also contains routines for the processing of data in an actual HID report, using the parsed report
- * descritor data as a guide for the encoding.
+ * descriptor data as a guide for the encoding.
*
* @{
*/
diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h
index 41b235bdf..1d238bd8b 100644
--- a/LUFA/Drivers/USB/Class/Host/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h
@@ -155,7 +155,7 @@
*/
uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- /** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
+ /** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
* configured via the call to \ref RNDIS_Host_ConfigurePipes().
*
* \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
index 1727da0d8..bdbe31c33 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
@@ -45,7 +45,7 @@
/** \ingroup Group_EndpointPrimitiveRW
* \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- * \brief Endpoint primative read/write definitions for the Atmel AVR8 architecture.
+ * \brief Endpoint primitive read/write definitions for the Atmel AVR8 architecture.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to endpoints.
@@ -182,7 +182,7 @@
#define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
- /** Retrives the maximum bank size in bytes of a given endpoint.
+ /** Retrieves the maximum bank size in bytes of a given endpoint.
*
* \note This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
index 2c2b5068e..6854128d3 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
@@ -330,7 +330,7 @@
*/
uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex);
- /** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to
+ /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to
* the attached device.
*
* \note After this routine returns, the control pipe will be selected.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index 8022a812a..c7e21f73a 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -45,7 +45,7 @@
/** \ingroup Group_PipePrimitiveRW
* \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- * \brief Pipe primative data read/write definitions for the Atmel AVR8 architecture.
+ * \brief Pipe primitive data read/write definitions for the Atmel AVR8 architecture.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to pipes.
diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h
index 10b2b9c93..bbd75467f 100644
--- a/LUFA/Drivers/USB/Core/Endpoint.h
+++ b/LUFA/Drivers/USB/Core/Endpoint.h
@@ -45,7 +45,7 @@
/** \ingroup Group_EndpointRW
* \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
- * \brief Endpoint data primative read/write definitions.
+ * \brief Endpoint data primitive read/write definitions.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to endpoints.
diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h
index 5354095a1..8d0864754 100644
--- a/LUFA/Drivers/USB/Core/Pipe.h
+++ b/LUFA/Drivers/USB/Core/Pipe.h
@@ -45,7 +45,7 @@
/** \ingroup Group_PipeRW
* \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types
- * \brief Pipe data primative read/write definitions.
+ * \brief Pipe data primitive read/write definitions.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to pipes.
diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
index 4f31a0d86..1c9f6ccf1 100644
--- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h
@@ -45,7 +45,7 @@
/** \ingroup Group_EndpointPrimitiveRW
* \defgroup Group_EndpointPrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)
- * \brief Endpoint primative read/write definitions for the Atmel AVR32 UC3 architecture.
+ * \brief Endpoint primitive read/write definitions for the Atmel AVR32 UC3 architecture.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to endpoints.
@@ -198,7 +198,7 @@
#define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
- /** Retrives the maximum bank size in bytes of a given endpoint.
+ /** Retrieves the maximum bank size in bytes of a given endpoint.
*
* \note This macro will only work correctly on endpoint indexes that are compile-time constants
* defined by the preprocessor.
diff --git a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
index 65b8011c9..7fd46a313 100644
--- a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h
@@ -331,7 +331,7 @@
*/
uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex);
- /** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to
+ /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to
* the attached device.
*
* \note After this routine returns, the control pipe will be selected.
diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
index bda3e8e2c..b6f015c11 100644
--- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
@@ -45,7 +45,7 @@
/** \ingroup Group_PipePrimitiveRW
* \defgroup Group_PipePrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)
- * \brief Pipe primative data read/write definitions for the Atmel AVR32 UC3 architecture.
+ * \brief Pipe primitive data read/write definitions for the Atmel AVR32 UC3 architecture.
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to pipes.
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 777ac0db2..27a25e75f 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -55,8 +55,8 @@
* - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus)
* - Internal restructuring for eventual multiple architecture ports
* - Added AVR32 UC3 architecture port (currently incomplete/experimental)
- * - Added new architecture independant functions to enable, disable, save and restore the Global Interrupt Enable flags
- * - Added new RNDIS Device Classs Driver packet send and receive functions
+ * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags
+ * - Added new RNDIS Device Class Driver packet send and receive functions
* - Library Applications:
* - Added ability to write protect Mass Storage disk write operations from the host OS
* - Added new MIDIToneGenerator project
@@ -97,7 +97,7 @@
* a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
* - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of
* a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
- * - Seperated out board drivers by architecture in the library internals for better organisation
+ * - Separated out board drivers by architecture in the library internals for better organisation
* - Library Applications:
* - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode
* via the Input Capture register, to reduce user confusion
@@ -108,7 +108,7 @@
* - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition
* - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0
* for other uses
- * - Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point
+ * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point
* instead of starting point, to give maximum reliability (thanks to Anton Staaf)
*
* <b>Fixed:</b>
@@ -123,7 +123,7 @@
* - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
* error code enum (thanks to Daniel Seibert)
* - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used
- * - Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board
+ * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board
* - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe)
* is found
* - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine
@@ -168,7 +168,7 @@
* - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
* - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
* tasks for each driver is called
- * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+ * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda)
* - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
* - Library Applications:
* - Added default test tone generation mode to the Device mode AudioInput demos
diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt
index 660cdcfb2..5e9e0990e 100644
--- a/LUFA/ManPages/CompileTimeTokens.txt
+++ b/LUFA/ManPages/CompileTimeTokens.txt
@@ -83,8 +83,8 @@
*
* <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - <i>AVR8 Only</i> \n
* The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to
- * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialisation. This compile
- * time token may be used to restrict the intialisation order to ascending indexes only in exchange for a smaller compiled binary size.
+ * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile
+ * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size.
*
* <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
* By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt
index 47815ea44..4016bf52b 100644
--- a/LUFA/ManPages/FutureChanges.txt
+++ b/LUFA/ManPages/FutureChanges.txt
@@ -19,7 +19,7 @@
* -# Re-add interrupt Pipe/Endpoint support
* -# Add makefile includes to reduce boilerplate in user makefiles
* -# Update stream APIs to use DMA transfers on supported architectures
- * -# Pull out third party libraries into a seperate folder and reference them as required
+ * -# Pull out third party libraries into a separate folder and reference them as required
* -# Add a LUFA_YIELD macro for integration into a third-party RTOS
* -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects
* - Documentation/Support
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 83eb6e6a4..86bf22803 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -37,7 +37,7 @@
*
* <b>USB Core</b>
* - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of
- * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimise the compiled program
+ * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimize the compiled program
* size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering
* in exchange for a smaller compiled binary size.
* - The previous F_CLOCK symbol, required in the project makefile, has been renamed to F_USB. This is due to the previous name