diff options
author | Joel Bodenmann <joel@unormal.org> | 2013-11-10 22:09:20 +0100 |
---|---|---|
committer | Joel Bodenmann <joel@unormal.org> | 2013-11-10 22:09:20 +0100 |
commit | 6b1af0641cef5cdfbfa953e9e19c2c14b4e2aee0 (patch) | |
tree | 6839ffcb91421ed39f94303a55eaba53a0a255ae /boards/addons/gdisp | |
parent | 75a6dd8404fe693f6002a56efa8b649b013226cc (diff) | |
download | uGFX-6b1af0641cef5cdfbfa953e9e19c2c14b4e2aee0.tar.gz uGFX-6b1af0641cef5cdfbfa953e9e19c2c14b4e2aee0.tar.bz2 uGFX-6b1af0641cef5cdfbfa953e9e19c2c14b4e2aee0.zip |
fixed Embest board
Diffstat (limited to 'boards/addons/gdisp')
-rw-r--r-- | boards/addons/gdisp/board_SSD1289_firebullstm32f103.h | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/boards/addons/gdisp/board_SSD1289_firebullstm32f103.h b/boards/addons/gdisp/board_SSD1289_firebullstm32f103.h deleted file mode 100644 index 99d37299..00000000 --- a/boards/addons/gdisp/board_SSD1289_firebullstm32f103.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file drivers/gdisp/SSD1289/board_SSD1289_firebullstm32f103.h - * @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display. - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -// For a multiple display configuration we would put all this in a structure and then -// set g->board to that structure. -#define SET_CS palSetPad(GPIOD, 12); -#define CLR_CS palClearPad(GPIOD, 12); -#define SET_RS palSetPad(GPIOD, 13); -#define CLR_RS palClearPad(GPIOD, 13); -#define SET_WR palSetPad(GPIOD, 14); -#define CLR_WR palClearPad(GPIOD, 14); -#define SET_RD palSetPad(GPIOD, 15); -#define CLR_RD palClearPad(GPIOD, 15); - -static inline void init_board(GDisplay *g) { - - // As we are not using multiple displays we set g->board to NULL as we don't use it. - g->board = 0; - - switch(g->controllerdisplay) { - case 0: // Set up for Display 0 - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL); - - // Configure the pins to a well know state - SET_RS; - SET_RD; - SET_WR; - CLR_CS; - break; - } -} - -static inline void post_init_board(GDisplay *g) { - (void) g; -} - -static inline void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - (void) state; - /* Nothing to do here - reset pin tied to Vcc */ -} - -static inline void set_backlight(GDisplay *g, uint8_t percent) { - (void) g; - (void) percent; - /* Nothing to do here - Backlight always on */ -} - -static inline void acquire_bus(GDisplay *g) { - (void) g; -} - -static inline void release_bus(GDisplay *g) { - (void) g; -} - -static inline void write_index(GDisplay *g, uint16_t index) { - (void) g; - palWritePort(GPIOE, index); - CLR_RS; CLR_WR; SET_WR; SET_RS; -} - -static inline void write_data(GDisplay *g, uint16_t data) { - (void) g; - palWritePort(GPIOE, data); - CLR_WR; SET_WR; -} - -static inline void setreadmode(GDisplay *g) { - (void) g; - // change pin mode to digital input - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT); - CLR_RD; -} - -static inline void setwritemode(GDisplay *g) { - (void) g; - // change pin mode back to digital output - SET_RD; - palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL); -} - -static inline uint16_t read_data(GDisplay *g) { - return palReadPort(GPIOE); -} - -#if defined(GDISP_USE_DMA) - #error "GDISP - SSD1289: The GPIO interface does not support DMA" -#endif - -#endif /* _GDISP_LLD_BOARD_H */ - |