cleaned up board file mess

1 files changed, 0 insertions, 122 deletions

diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h
deleted file mode 100644
index f4058190..00000000
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://chibios-gfx.com/license.html
- */
-

-/**

- * @file    drivers/gdisp/Nokia6610GE12/gdisp_lld_board_example.h

- * @brief   GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.

- *

- * @addtogroup GDISP

- * @{

- */

-

-#ifndef _GDISP_LLD_BOARD_H

-#define _GDISP_LLD_BOARD_H

-

-/**

- * @brief   Initialise the board for the display.

- * @notes	Performs the following functions:

- *			1. initialise the spi port used by your display

- *			2. initialise the reset pin (initial state not-in-reset)

- *			3. initialise the chip select pin (initial state not-active)

- *			4. initialise the backlight pin (initial state back-light off)

- *

- * @notapi

- */

-static inline void init_board(void) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for init_board for your board"

-}

-

-/**

- * @brief   Set or clear the lcd reset pin.

- *

- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation

- * 

- * @notapi

- */

-static inline void setpin_reset(bool_t state) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for setpin_reset for your board"

-}

-

-/**

- * @brief   Set the lcd back-light level.

- * @note	For now 0% turns the backlight off, anything else the backlight is on.

- *			While the hardware supports PWM backlight control, we are not using it

- *			yet.

- *

- * @param[in] percent		0 to 100%

- * 

- * @notapi

- */

-static inline void set_backlight(uint8_t percent) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for set_backlight for your board"

-}

-

-/**

- * @brief   Take exclusive control of the bus

- *

- * @notapi

- */

-static inline void acquire_bus(void) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for acquire_bus for your board"

-}

-

-/**

- * @brief   Release exclusive control of the bus

- *

- * @notapi

- */

-static inline void release_bus(void) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for release_bus for your board"

-}

-

-/**

- * @brief   Send an 8 bit command to the lcd.

- *

- * @param[in] cmd		The command to send

- *

- * @notapi

- */

-static inline void write_cmd(uint16_t cmd) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for write_cmd for your board"

-}

-

-/**

- * @brief   Send an 8 bit data to the lcd.

- *

- * @param[in] data		The data to send

- * 

- * @notapi

- */

-static inline void write_data(uint16_t data) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for write_data for your board"

-}

-

-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)

-/**

- * @brief   Read data from the lcd.

- *

- * @return	The data from the lcd

- * @note	The chip select may need to be asserted/de-asserted

- * 			around the actual spi read

- * 

- * @notapi

- */

-static inline uint16_t read_data(void) {

-	/* Code here */

-	#error "gdispNokia6610GE12: You must supply a definition for read_data for your board"

-}

-#endif

-

-#endif /* _GDISP_LLD_BOARD_H */

-/** @} */