Clean up the driver directory structure by moving all board specific files into the boards sub-structure.

1 files changed, 0 insertions, 90 deletions

diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h b/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
deleted file mode 100644
index 158934b6..00000000
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
- * @brief   GINPUT Touch low level driver source for the ADS7843 on an Olimex STM32E407.
- *
- * @defgroup Mouse Mouse
- * @ingroup GINPUT
- * @{
- */
-
-#ifndef _GINPUT_LLD_MOUSE_BOARD_H
-#define _GINPUT_LLD_MOUSE_BOARD_H
-
-static const SPIConfig spicfg = { 
-    NULL,
-	GPIOC,
-    4,
-    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
-};
-
-/**
- * @brief   Initialise the board for the touch.
- *
- * @notapi
- */
-static inline void init_board(void) {
-	spiStart(&SPID2, &spicfg);
-}
-
-/**
- * @brief   Check whether the surface is currently touched
- * @return	TRUE if the surface is currently touched
- *
- * @notapi
- */
-static inline bool_t getpin_pressed(void) {
-	return (!palReadPad(GPIOC, 5));
-}
-/**
- * @brief   Aquire the bus ready for readings
- *
- * @notapi
- */
-static inline void aquire_bus(void) {
-	spiAcquireBus(&SPID2);
-    //TOUCHSCREEN_SPI_PROLOGUE();
-    palClearPad(GPIOC, 4);
-}
-
-/**
- * @brief   Release the bus after readings
- *
- * @notapi
- */
-static inline void release_bus(void) {
-	palSetPad(GPIOC, 4);
-	spiReleaseBus(&SPID2);
-    //TOUCHSCREEN_SPI_EPILOGUE();
-}
-
-/**
- * @brief   Read a value from touch controller
- * @return	The value read from the controller
- *
- * params[in] port	The controller port to read.
- *
- * @notapi
- */
-static inline uint16_t read_value(uint16_t port) {
-    static uint8_t txbuf[3] = {0};
-    static uint8_t rxbuf[3] = {0};
-    uint16_t ret;
-
-    txbuf[0] = port;
-
-    spiExchange(&SPID2, 3, txbuf, rxbuf);
-
-    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); 
-    
-	return ret;
-}
-
-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
-/** @} */