diff options
author | inmarket <andrewh@inmarket.com.au> | 2013-10-19 16:33:56 +1000 |
---|---|---|
committer | inmarket <andrewh@inmarket.com.au> | 2013-10-19 16:33:56 +1000 |
commit | b6986f5b169631fb76c8cb191807321c3ac04f7a (patch) | |
tree | eff6ee84b3b4ff1046c0cd07eb629fb1aaf82262 /drivers | |
parent | ad416c32b3558b56c8462dbcadfe1c0520479a1f (diff) | |
download | uGFX-b6986f5b169631fb76c8cb191807321c3ac04f7a.tar.gz uGFX-b6986f5b169631fb76c8cb191807321c3ac04f7a.tar.bz2 uGFX-b6986f5b169631fb76c8cb191807321c3ac04f7a.zip |
Convert Nokia6610GE8 driver to the new format.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_olimexsam7ex256.h | 195 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h | 131 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld.c | 284 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld.mk | 5 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h | 235 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h | 128 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h | 13 |
7 files changed, 464 insertions, 527 deletions
diff --git a/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_olimexsam7ex256.h b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_olimexsam7ex256.h new file mode 100644 index 00000000..ebd038d5 --- /dev/null +++ b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_olimexsam7ex256.h @@ -0,0 +1,195 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +/** + * @file drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_olimexsam7ex256.h + * @brief GDISP Graphic Driver subsystem board interface for the Olimex SAM7-EX256 board. + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +/* + * Set various display properties. These properties mostly depend on the exact controller chip you get. + * The defaults should work for most controllers. + */ +//#define GDISP_GE8_BROKEN_CONTROLLER FALSE // Uncomment this out if you have a controller thats not window wrap broken. +//#define GDISP_SCREEN_HEIGHT 130 // The visible display height +//#define GDISP_SCREEN_WIDTH 130 // The visible display width +//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area +//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area +//#define GDISP_SLEEP_SIZE 32 // The size of the sleep mode partial display +//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display +//#define GDISP_INITIAL_CONTRAST 38 // The initial contrast percentage +//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage + +// For a multiple display configuration we would put all this in a structure and then +// set g->priv to that structure. + +// ****************************************************** +// Pointers to AT91SAM7X256 peripheral data structures +// ****************************************************** +static volatile AT91PS_PIO pPIOA = AT91C_BASE_PIOA; +static volatile AT91PS_PIO pPIOB = AT91C_BASE_PIOB; +static volatile AT91PS_SPI pSPI = AT91C_BASE_SPI0; +static volatile AT91PS_PMC pPMC = AT91C_BASE_PMC; +static volatile AT91PS_PDC pPDC = AT91C_BASE_PDC_SPI0; + +/* The PWM backlight control is non-linear on this board. + * We pick values here that make it look a bit more linear. + */ +#define PWM_TOP_VALUE 500 +#define PWM_BOTTOM_VALUE 200 + +#define PWM_VALUE(x) (PWM_BOTTOM_VALUE+(PWM_TOP_VALUE-PWM_BOTTOM_VALUE)*(x)/100) + +/* PWM configuration structure. The LCD Backlight is on PWM1/PB20 ie PWM2/PIN1 in ChibiOS speak */ +static const PWMConfig pwmcfg = { + 1000000, /* 1 MHz PWM clock frequency. Ignored as we are using PWM_MCK_DIV_n */ + 1000, /* PWM period is 1000 cycles. */ + NULL, + { + {PWM_MCK_DIV_1 | PWM_OUTPUT_ACTIVE_HIGH | PWM_OUTPUT_PIN1 | PWM_DISABLEPULLUP_PIN1, NULL}, + }, +}; + +static bool_t pwmRunning = FALSE; + +/** + * @brief Initialise the board for the display. + * @notes Performs the following functions: + * 1. initialise the spi port used by your display + * 2. initialise the reset pin (initial state not-in-reset) + * 3. initialise the chip select pin (initial state not-active) + * 4. initialise the backlight pin (initial state back-light off) + * + * @notapi + */ +static inline void init_board(GDisplay *g) { + + // As we are not using multiple displays we set g->priv to NULL as we don't use it. + g->priv = 0; + + switch(g->controllerdisplay) { + case 0: // Set up for Display 0 + // ********************************************************************************************* + // InitSpi( ) + // + // Sets up SPI channel 0 for communications to Nokia 6610 LCD Display + // + // I/O ports used: PA2 = LCD Reset (set to low to reset) + // PA12 = LCD chip select (set to low to select the LCD chip) + // PA16 = SPI0_MISO Master In - Slave Out (not used in LCD interface) + // PA17 = SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave) + // PA18 = SPI0_SPCK Serial Clock (to LCD slave) + // PB20 = backlight control (normally PWM control, 1 = full on) + // + // *********************************************************************************************} + + /* This code should really use the ChibiOS driver for these functions */ + + // Pin for backlight + pPIOB->PIO_CODR = PIOB_LCD_BL_MASK; // Set PB20 to LOW + pPIOB->PIO_OER = PIOB_LCD_BL_MASK; // Configure PB20 as output + + // Reset pin + pPIOA->PIO_SODR = PIOA_LCD_RESET_MASK; // Set PA2 to HIGH + pPIOA->PIO_OER = PIOA_LCD_RESET_MASK; // Configure PA2 as output + + // CS pin - this seems to be ignored + // pPIOA->PIO_SODR = 1<<12; // Set PA2 to HIGH + // pPIOA->PIO_OER = 1<<12; // Configure PA2 as output + + // Init SPI0 + // Disable the following pins from PIO control (will be used instead by the SPI0 peripheral) + // BIT12 = PA12 -> SPI0_NPCS0 chip select + // BIT16 = PA16 -> SPI0_MISO Master In - Slave Out (not used in LCD interface) + // BIT17 = PA17 -> SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave) + // BIT18 = PA18 -> SPI0_SPCK Serial Clock (to LCD slave) + pPIOA->PIO_PDR = (1<<12) | (1<<16) | (1<<17) | (1<<18); + pPIOA->PIO_ASR = (1<<12) | (1<<16) | (1<<17) | (1<<18); + pPIOA->PIO_BSR = 0; + + //enable the clock of SPI + pPMC->PMC_PCER = 1 << AT91C_ID_SPI0; + + // Fixed mode + pSPI->SPI_CR = 0x81; //SPI Enable, Software reset + pSPI->SPI_CR = 0x01; //SPI Enable + pSPI->SPI_MR = 0xE0011; //Master mode, fixed select, disable decoder, PCS=1110 + pSPI->SPI_CSR[0] = 0x01010311; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/3 = 16MHz + + /* Display backlight control at 100% */ + pwmRunning = FALSE; + palSetPad(IOPORT2, PIOB_LCD_BL); + break; + } +} + +static inline void post_init_board(GDisplay *g) { + (void) g; +} + +static inline void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) + palClearPad(IOPORT1, PIOA_LCD_RESET); + else + palSetPad(IOPORT1, PIOA_LCD_RESET); +} + +static inline void set_backlight(GDisplay *g, uint8_t percent) { + (void) g; + if (percent == 100) { + /* Turn the pin on - No PWM */ + if (pwmRunning) { + pwmStop(&PWMD2); + pwmRunning = FALSE; + } + palSetPad(IOPORT2, PIOB_LCD_BL); + } else if (percent == 0) { + /* Turn the pin off - No PWM */ + if (pwmRunning) { + pwmStop(&PWMD2); + pwmRunning = FALSE; + } + palClearPad(IOPORT2, PIOB_LCD_BL); + } else { + /* Use the PWM */ + if (!pwmRunning) { + pwmStart(&PWMD2, &pwmcfg); + pwmRunning = TRUE; + } + pwmEnableChannel(&PWMD2, 0, PWM_VALUE(percent)); + } +} + +static inline void acquire_bus(GDisplay *g) { + (void) g; +} + +static inline void release_bus(GDisplay *g) { + (void) g; +} + +static inline void write_index(GDisplay *g, uint16_t index) { + (void) g; + // wait for the previous transfer to complete + while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); + // send the command + pSPI->SPI_TDR = index & 0xFF; +} + +static inline void write_data(GDisplay *g, uint16_t data) { + (void) g; + // wait for the previous transfer to complete + while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); + // send the data + pSPI->SPI_TDR = data | 0x0100; +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h new file mode 100644 index 00000000..93689abc --- /dev/null +++ b/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h @@ -0,0 +1,131 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +/** + * @file drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h + * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display. + * + * @addtogroup GDISP + * @{ + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +/* + * Set various display properties. These properties mostly depend on the exact controller chip you get. + * The defaults should work for most controllers. + */ +//#define GDISP_SCREEN_HEIGHT 130 // The visible display height +//#define GDISP_SCREEN_WIDTH 130 // The visible display width +//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area +//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area +//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display +//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage +//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage + +/** + * @brief Initialise the board for the display. + * + * @param[in] g The GDisplay structure + * + * @note Set the g->priv member to whatever is appropriate. For multiple + * displays this might be a pointer to the appropriate register set. + * + * @notapi + */ +static inline void init_board(GDisplay *g) { + (void) g; +} + +/** + * @brief After the initialisation. + * + * @param[in] g The GDisplay structure + * + * @notapi + */ +static inline void post_init_board(GDisplay *g) { + (void) g; +} + +/** + * @brief Set or clear the lcd reset pin. + * + * @param[in] g The GDisplay structure + * @param[in] state TRUE = lcd in reset, FALSE = normal operation + * + * @notapi + */ +static inline void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + (void) state; +} + +/** + * @brief Set the lcd back-light level. + * + * @param[in] g The GDisplay structure + * @param[in] percent 0 to 100% + * + * @notapi + */ +static inline void set_backlight(GDisplay *g, uint8_t percent) { + (void) g; + (void) percent; +} + +/** + * @brief Take exclusive control of the bus + * + * @param[in] g The GDisplay structure + * + * @notapi + */ +static inline void acquire_bus(GDisplay *g) { + (void) g; +} + +/** + * @brief Release exclusive control of the bus + * + * @param[in] g The GDisplay structure + * + * @notapi + */ +static inline void release_bus(GDisplay *g) { + (void) g; +} + +/** + * @brief Send data to the index register. + * + * @param[in] g The GDisplay structure + * @param[in] index The index register to set + * + * @notapi + */ +static inline void write_index(GDisplay *g, uint16_t index) { + (void) g; + (void) index; +} + +/** + * @brief Send data to the lcd. + * + * @param[in] g The GDisplay structure + * @param[in] data The data to send + * + * @notapi + */ +static inline void write_data(GDisplay *g, uint16_t data) { + (void) g; + (void) data; +} + +#endif /* _GDISP_LLD_BOARD_H */ +/** @} */ diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c index d3e30d0e..4906ee78 100644 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c @@ -58,9 +58,11 @@ #undef GDISP_SCREEN_WIDTH #endif -#define GDISP_LLD_DECLARATIONS +#define GDISP_DRIVER_VMT GDISPVMT_Nokia6610GE8 +#include "../drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h" #include "gdisp/lld/gdisp_lld.h" -#include "gdisp_lld_board.h" + +#include "board_Nokia6610GE8.h" /*===========================================================================*/ /* Driver local definitions. */ @@ -108,9 +110,9 @@ /*===========================================================================*/ #if GDISP_HARDWARE_STREAM_WRITE - static color_t savecolor; + static color_t savecolor[GDISP_TOTAL_DISPLAYS]; #if GDISP_GE8_BROKEN_CONTROLLER - static color_t firstcolor; + static color_t firstcolor[GDISP_TOTAL_DISPLAYS]; #endif #endif @@ -122,57 +124,86 @@ /*===========================================================================*/ // Some macros just to make reading the code easier -#define delayms(ms) gfxSleepMilliseconds(ms) -#define write_data2(d1, d2) { write_data(d1); write_data(d2); } -#define write_data3(d1, d2, d3) { write_data(d1); write_data(d2); write_data(d3); } -#define write_data4(d1, d2, d3, d4) { write_data(d1); write_data(d2); write_data(d3); write_data(d4); } -#define write_cmd1(cmd, d1) { write_cmd(cmd); write_data(d1); } -#define write_cmd2(cmd, d1, d2) { write_cmd(cmd); write_data2(d1, d2); } -#define write_cmd3(cmd, d1, d2, d3) { write_cmd(cmd); write_data3(d1, d2, d3); } -#define write_cmd4(cmd, d1, d2, d3, d4) { write_cmd(cmd); write_data4(d1, d2, d3, d4); } - +#define delayms(ms) gfxSleepMilliseconds(ms) +#define write_data2(g, d1, d2) { write_data(g, d1); write_data(g, d2); } +#define write_data3(g, d1, d2, d3) { write_data(g, d1); write_data(g, d2); write_data(g, d3); } +#define write_data4(g, d1, d2, d3, d4) { write_data(g, d1); write_data(g, d2); write_data(g, d3); write_data(g, d4); } +#define write_cmd1(g, cmd, d1) { write_index(g, cmd); write_data(g, d1); } +#define write_cmd2(g, cmd, d1, d2) { write_index(g, cmd); write_data2(g, d1, d2); } +#define write_cmd3(g, cmd, d1, d2, d3) { write_index(g, cmd); write_data3(g, d1, d2, d3); } +#define write_cmd4(g, cmd, d1, d2, d3, d4) { write_index(g, cmd); write_data4(g, d1, d2, d3, d4); } + +static inline void set_viewport(GDisplay* g) { + #if GDISP_NOKIA_ORIENTATION && GDISP_NEED_CONTROL + switch(g->g.Orientation) { + case GDISP_ROTATE_0: + write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x); // Column address set + write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y); // Page address set + break; + case GDISP_ROTATE_90: + write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y); + write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x); + break; + case GDISP_ROTATE_180: + write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x); + write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y); + break; + case GDISP_ROTATE_270: + write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y); + write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x); + break; + } + #else + write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set + write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set + #endif + write_index(g, RAMWR); +} /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ -LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { /* Initialise your display */ - init_board(); + init_board(g); // Hardware reset - setpin_reset(TRUE); + setpin_reset(g, TRUE); delayms(20); - setpin_reset(FALSE); + setpin_reset(g, FALSE); delayms(20); // Get the bus for the following initialisation commands - acquire_bus(); + acquire_bus(g); - write_cmd4(DISCTL, 0x00, GDISP_SCAN_LINES/4-1, 0x0A, 0x00); // Display control - How the controller drives the LCD + write_cmd4(g, DISCTL, 0x00, GDISP_SCAN_LINES/4-1, 0x0A, 0x00); // Display control - How the controller drives the LCD // P1: 0x00 = 2 divisions, switching period=8 (default) // P2: 0x20 = nlines/4 - 1 = 132/4 - 1 = 32) // P3: 0x0A = standard inverse highlight, inversion every frame // P4: 0x00 = dispersion on - write_cmd1(COMSCN, 0x01); // COM scan - How the LCD is connected to the controller + write_cmd1(g, COMSCN, 0x01); // COM scan - How the LCD is connected to the controller // P1: 0x01 = Scan 1->80, 160<-81 - write_cmd(OSCON); // Internal oscillator ON - write_cmd(SLPOUT); // Sleep out - write_cmd1(PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON - write_cmd3(DATCTL, 0x00, 0x00, 0x02); // Data control + write_index(g, OSCON); // Internal oscillator ON + write_index(g, SLPOUT); // Sleep out + write_cmd1(g, PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON + write_cmd3(g, DATCTL, 0x00, 0x00, 0x02); // Data control // P1: 0x00 = page address normal, column address normal, address scan in column direction // P2: 0x00 = RGB sequence (default value) // P3: 0x02 = 4 bits per colour (Type A) - write_cmd2(VOLCTR, 63*GDISP_INITIAL_CONTRAST/100, 0x03); // Voltage control (contrast setting) + write_cmd2(g, VOLCTR, 63*GDISP_INITIAL_CONTRAST/100, 0x03); // Voltage control (contrast setting) // P1 = Contrast (0..63) // P2 = 3 resistance ratio (only value that works) delayms(100); // Allow power supply to stabilise - write_cmd(DISON); // Turn on the display + write_index(g, DISON); // Turn on the display + + // Finish Init + post_init_board(g); // Release the bus - release_bus(); + release_bus(g); /* Turn on the back-light */ - set_backlight(GDISP_INITIAL_BACKLIGHT); + set_backlight(g, GDISP_INITIAL_BACKLIGHT); /* Initialise the GDISP structure to match */ g->g.Orientation = GDISP_ROTATE_0; @@ -185,30 +216,30 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { } #if GDISP_HARDWARE_STREAM_WRITE - LLDSPEC void gdisp_lld_write_start(GDISPDriver *g) { - acquire_bus(); - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set - write_cmd(RAMWR); + LLDSPEC void gdisp_lld_write_start(GDisplay *g) { + acquire_bus(g); + set_viewport(g); g->flags &= ~(GDISP_FLG_ODDBYTE|GDISP_FLG_RUNBYTE); } - LLDSPEC void gdisp_lld_write_color(GDISPDriver *g) { + LLDSPEC void gdisp_lld_write_color(GDisplay *g) { #if GDISP_GE8_BROKEN_CONTROLLER if (!(g->flags & GDISP_FLG_RUNBYTE)) { - firstcolor = g->p.color; + firstcolor[g->controllerdisplay] = g->p.color; g->flags |= GDISP_FLG_RUNBYTE; } #endif if ((g->flags & GDISP_FLG_ODDBYTE)) { // Write the pair of pixels to the display - write_data3(((savecolor >> 4) & 0xFF), (((savecolor << 4) & 0xF0)|((g->p.color >> 8) & 0x0F)), (g->p.color & 0xFF)); + write_data3(g, ((savecolor[g->controllerdisplay] >> 4) & 0xFF), + (((savecolor[g->controllerdisplay] << 4) & 0xF0)|((g->p.color >> 8) & 0x0F)), + (g->p.color & 0xFF)); g->flags &= ~GDISP_FLG_ODDBYTE; } else { - savecolor = g->p.color; + savecolor[g->controllerdisplay] = g->p.color; g->flags |= GDISP_FLG_ODDBYTE; } } - LLDSPEC void gdisp_lld_write_stop(GDISPDriver *g) { + LLDSPEC void gdisp_lld_write_stop(GDisplay *g) { if ((g->flags & GDISP_FLG_ODDBYTE)) { #if GDISP_GE8_BROKEN_CONTROLLER /** @@ -229,80 +260,47 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { * user application uses the streaming calls and then terminates the stream early or after buffer wrap. * Since this is such an unlikely situation we just don't handle it. */ - write_data3(((savecolor >> 4) & 0xFF), (((savecolor << 4) & 0xF0)|((firstcolor >> 8) & 0x0F)), (firstcolor & 0xFF)); + write_data3(g, ((savecolor[g->controllerdisplay] >> 4) & 0xFF), + (((savecolor[g->controllerdisplay] << 4) & 0xF0)|((firstcolor[g->controllerdisplay] >> 8) & 0x0F)), + (firstcolor[g->controllerdisplay] & 0xFF)); #else - write_data2(((savecolor >> 4) & 0xFF), ((savecolor << 4) & 0xF0)); - write_cmd(NOP); + write_data2(g, ((savecolor[g->controllerdisplay] >> 4) & 0xFF), ((savecolor[g->controllerdisplay] << 4) & 0xF0)); + write_index(g, NOP); #endif } - release_bus(); + release_bus(g); } #endif #if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDISPDriver *g) { - acquire_bus(); - switch(g->g.Orientation) { - case GDISP_ROTATE_0: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x); // Column address set - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y); // Page address set - break; - case GDISP_ROTATE_90: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x); - break; - case GDISP_ROTATE_180: - write_cmd2(CASET, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y); - break; - case GDISP_ROTATE_270: - write_cmd2(CASET, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x); - break; - } - write_cmd3(RAMWR, 0, (g->p.color>>8) & 0x0F, g->p.color & 0xFF); - release_bus(); + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + acquire_bus(g); + set_viewport(g); + write_data3(g, 0, (g->p.color>>8) & 0x0F, g->p.color & 0xFF); + release_bus(g); } #endif /* ---- Optional Routines ---- */ #if GDISP_HARDWARE_FILLS - LLDSPEC void gdisp_lld_fill_area(GDISPDriver *g) { + LLDSPEC void gdisp_lld_fill_area(GDisplay *g) { unsigned tuples; tuples = (g->p.cx*g->p.cy+1)>>1; // With an odd sized area we over-print by one pixel. // This extra pixel overwrites the first pixel (harmless as it is the same colour) - acquire_bus(); - switch(g->g.Orientation) { - case GDISP_ROTATE_0: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set - break; - case GDISP_ROTATE_90: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y+g->p.cy-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_Y_OFFSET+g->g.Width-g->p.x-1); - break; - case GDISP_ROTATE_180: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_X_OFFSET+g->g.Width-g->p.x-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_Y_OFFSET+g->g.Height-g->p.y-1); - break; - case GDISP_ROTATE_270: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_X_OFFSET+g->g.Height-g->p.y-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x+g->p.cx-1); - break; - } - write_cmd(RAMWR); + acquire_bus(g); + set_viewport(g); while(tuples--) - write_data3(((g->p.color >> 4) & 0xFF), (((g->p.color << 4) & 0xF0)|((g->p.color >> 8) & 0x0F)), (g->p.color & 0xFF)); - release_bus(); + write_data3(g, ((g->p.color >> 4) & 0xFF), (((g->p.color << 4) & 0xF0)|((g->p.color >> 8) & 0x0F)), (g->p.color & 0xFF)); + release_bus(g); } #endif #if GDISP_HARDWARE_BITFILLS - LLDSPEC void gdisp_lld_blit_area(GDISPDriver *g) { + LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { coord_t lg, x, y; color_t c1, c2; unsigned tuples; @@ -318,26 +316,8 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { buffer = (const pixel_t *)g->p.ptr; /* Set up the data window to transfer */ - acquire_bus(); - switch(g->g.Orientation) { - case GDISP_ROTATE_0: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set - break; - case GDISP_ROTATE_90: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y+g->p.cy-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_Y_OFFSET+g->g.Width-g->p.x-1); - break; - case GDISP_ROTATE_180: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_X_OFFSET+g->g.Width-g->p.x-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_Y_OFFSET+g->g.Height-g->p.y-1); - break; - case GDISP_ROTATE_270: - write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_X_OFFSET+g->g.Height-g->p.y-1); - write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x+g->p.cx-1); - break; - } - write_cmd(RAMWR); + acquire_bus(g); + set_viewport(g); /* * Due to the way the Nokia6610 handles a decrementing column or page, @@ -389,7 +369,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { } /* Write the pair of pixels to the display */ - write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); + write_data3(g, ((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); } #else @@ -445,17 +425,17 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { } /* Write the pair of pixels to the display */ - write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); + write_data3(g, ((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); } #endif /* All done */ - release_bus(); + release_bus(g); } #endif #if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDISPDriver *g) { + LLDSPEC void gdisp_lld_control(GDisplay *g) { /* The hardware is capable of supporting... * GDISP_CONTROL_POWER - supported * GDISP_CONTROL_ORIENTATION - supported @@ -466,96 +446,96 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { case GDISP_CONTROL_POWER: if (g->g.Powermode == (powermode_t)g->p.ptr) return; - acquire_bus(); + acquire_bus(g); switch((powermode_t)g->p.ptr) { case powerOff: - set_backlight(0); // Turn off the backlight - write_cmd(DISOFF); // Turn off the display - write_cmd1(PWRCTR, 0x00); // Power control - all off - write_cmd(SLPIN); // Sleep in - write_cmd(OSCOFF); // Internal oscillator off + set_backlight(g, 0); // Turn off the backlight + write_index(g, DISOFF); // Turn off the display + write_cmd1(g, PWRCTR, 0x00); // Power control - all off + write_index(g, SLPIN); // Sleep in + write_index(g, OSCOFF); // Internal oscillator off break; case powerOn: - write_cmd(OSCON); // Internal oscillator on - write_cmd(SLPOUT); // Sleep out - write_cmd1(PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON - write_cmd2(VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) + write_index(g, OSCON); // Internal oscillator on + write_index(g, SLPOUT); // Sleep out + write_cmd1(g, PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON + write_cmd2(g, VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) delayms(100); // Allow power supply to stabilise - write_cmd(DISON); // Turn on the display - write_cmd(PTLOUT); // Remove sleep window - set_backlight(g->g.Backlight); // Turn on the backlight + write_index(g, DISON); // Turn on the display + write_index(g, PTLOUT); // Remove sleep window + set_backlight(g, g->g.Backlight); // Turn on the backlight break; case powerSleep: - write_cmd(OSCON); // Internal oscillator on - write_cmd(SLPOUT); // Sleep out - write_cmd1(PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON - write_cmd2(VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) + write_index(g, OSCON); // Internal oscillator on + write_index(g, SLPOUT); // Sleep out + write_cmd1(g, PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON + write_cmd2(g, VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) delayms(100); // Allow power supply to stabilise - write_cmd(DISON); // Turn on the display - write_cmd2(PTLIN, GDISP_SLEEP_POS/4, (GDISP_SLEEP_POS+GDISP_SLEEP_SIZE)/4); // Sleep Window - set_backlight(g->g.Backlight); // Turn on the backlight + write_index(g, DISON); // Turn on the display + write_cmd2(g, PTLIN, GDISP_SLEEP_POS/4, (GDISP_SLEEP_POS+GDISP_SLEEP_SIZE)/4); // Sleep Window + set_backlight(g, g->g.Backlight); // Turn on the backlight break; case powerDeepSleep: - write_cmd(OSCON); // Internal oscillator on - write_cmd(SLPOUT); // Sleep out - write_cmd1(PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON - write_cmd2(VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) + write_index(g, OSCON); // Internal oscillator on + write_index(g, SLPOUT); // Sleep out + write_cmd1(g, PWRCTR, 0x0F); // Power control - reference voltage regulator on, circuit voltage follower on, BOOST ON + write_cmd2(g, VOLCTR, g->g.Contrast, 0x03); // Voltage control (contrast setting) delayms(100); // Allow power supply to stabilise - write_cmd(DISON); // Turn on the display - write_cmd2(PTLIN, GDISP_SLEEP_POS/4, (GDISP_SLEEP_POS+GDISP_SLEEP_SIZE)/4); // Sleep Window - set_backlight(0); // Turn off the backlight + write_index(g, DISON); // Turn on the display + write_cmd2(g, PTLIN, GDISP_SLEEP_POS/4, (GDISP_SLEEP_POS+GDISP_SLEEP_SIZE)/4); // Sleep Window + set_backlight(g, 0); // Turn off the backlight break; default: - release_bus(); + release_bus(g); return; } - release_bus(); + release_bus(g); g->g.Powermode = (powermode_t)g->p.ptr; return; #if GDISP_NOKIA_ORIENTATION case GDISP_CONTROL_ORIENTATION: if (g->g.Orientation == (orientation_t)g->p.ptr) return; - acquire_bus(); + acquire_bus(g); switch((orientation_t)g->p.ptr) { case GDISP_ROTATE_0: - write_cmd3(DATCTL, 0x00, 0x00, 0x02); // P1: page normal, column normal, scan in column direction + write_cmd3(g, DATCTL, 0x00, 0x00, 0x02); // P1: page normal, column normal, scan in column direction g->g.Height = GDISP_SCREEN_HEIGHT; g->g.Width = GDISP_SCREEN_WIDTH; break; case GDISP_ROTATE_90: - write_cmd3(DATCTL, 0x05, 0x00, 0x02); // P1: page reverse, column normal, scan in page direction + write_cmd3(g, DATCTL, 0x05, 0x00, 0x02); // P1: page reverse, column normal, scan in page direction g->g.Height = GDISP_SCREEN_WIDTH; g->g.Width = GDISP_SCREEN_HEIGHT; break; case GDISP_ROTATE_180: - write_cmd3(DATCTL, 0x03, 0x00, 0x02); // P1: page reverse, column reverse, scan in column direction + write_cmd3(g, DATCTL, 0x03, 0x00, 0x02); // P1: page reverse, column reverse, scan in column direction g->g.Height = GDISP_SCREEN_HEIGHT; g->g.Width = GDISP_SCREEN_WIDTH; break; case GDISP_ROTATE_270: - write_cmd3(DATCTL, 0x06, 0x00, 0x02); // P1: page normal, column reverse, scan in page direction + write_cmd3(g, DATCTL, 0x06, 0x00, 0x02); // P1: page normal, column reverse, scan in page direction g->g.Height = GDISP_SCREEN_WIDTH; g->g.Width = GDISP_SCREEN_HEIGHT; break; default: - release_bus(); + release_bus(g); return; } - release_bus(); + release_bus(g); g->g.Orientation = (orientation_t)g->p.ptr; return; #endif case GDISP_CONTROL_BACKLIGHT: if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100; - set_backlight((unsigned)g->p.ptr); + set_backlight(g, (unsigned)g->p.ptr); g->g.Backlight = (unsigned)g->p.ptr; return; case GDISP_CONTROL_CONTRAST: if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100; - acquire_bus(); - write_cmd2(VOLCTR, 63*(unsigned)g->p.ptr/100, 0x03); - release_bus(); + acquire_bus(g); + write_cmd2(g, VOLCTR, 63*(unsigned)g->p.ptr/100, 0x03); + release_bus(g); g->g.Contrast = (unsigned)g->p.ptr; return; } diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld.mk b/drivers/gdisp/Nokia6610GE8/gdisp_lld.mk index 3e1f1851..28c57fd6 100644 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld.mk +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld.mk @@ -1,5 +1,2 @@ -# List the required driver. -GFXSRC += $(GFXLIB)/drivers/gdisp/Nokia6610GE8/gdisp_lld.c - -# Required include directories GFXINC += $(GFXLIB)/drivers/gdisp/Nokia6610GE8 +GFXSRC += $(GFXLIB)/drivers/gdisp/Nokia6610GE8/gdisp_lld.c diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h deleted file mode 100644 index 4eeea62f..00000000 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h - * @brief GDISP Graphic Driver subsystem board interface for the Olimex SAM7-EX256 board. - * - * @addtogroup GDISP - * @{ - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -/* - * Set various display properties. These properties mostly depend on the exact controller chip you get. - * The defaults should work for most controllers. - */ -//#define GDISP_GE8_BROKEN_CONTROLLER FALSE // Uncomment this out if you have a controller thats not window wrap broken. -//#define GDISP_SCREEN_HEIGHT 130 // The visible display height -//#define GDISP_SCREEN_WIDTH 130 // The visible display width -//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area -//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area -//#define GDISP_SLEEP_SIZE 32 // The size of the sleep mode partial display -//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display -//#define GDISP_INITIAL_CONTRAST 38 // The initial contrast percentage -//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage - -// ****************************************************** -// Pointers to AT91SAM7X256 peripheral data structures -// ****************************************************** -static volatile AT91PS_PIO pPIOA = AT91C_BASE_PIOA; -static volatile AT91PS_PIO pPIOB = AT91C_BASE_PIOB; -static volatile AT91PS_SPI pSPI = AT91C_BASE_SPI0; -static volatile AT91PS_PMC pPMC = AT91C_BASE_PMC; -static volatile AT91PS_PDC pPDC = AT91C_BASE_PDC_SPI0; - -/* The PWM backlight control is non-linear on this board. - * We pick values here that make it look a bit more linear. - */ -#define PWM_TOP_VALUE 500 -#define PWM_BOTTOM_VALUE 200 - -#define PWM_VALUE(x) (PWM_BOTTOM_VALUE+(PWM_TOP_VALUE-PWM_BOTTOM_VALUE)*(x)/100) - -/* PWM configuration structure. The LCD Backlight is on PWM1/PB20 ie PWM2/PIN1 in ChibiOS speak */ -static const PWMConfig pwmcfg = { - 1000000, /* 1 MHz PWM clock frequency. Ignored as we are using PWM_MCK_DIV_n */ - 1000, /* PWM period is 1000 cycles. */ - NULL, - { - {PWM_MCK_DIV_1 | PWM_OUTPUT_ACTIVE_HIGH | PWM_OUTPUT_PIN1 | PWM_DISABLEPULLUP_PIN1, NULL}, - }, -}; - -static bool_t pwmRunning = FALSE; - -/** - * @brief Initialise the board for the display. - * @notes Performs the following functions: - * 1. initialise the spi port used by your display - * 2. initialise the reset pin (initial state not-in-reset) - * 3. initialise the chip select pin (initial state not-active) - * 4. initialise the backlight pin (initial state back-light off) - * - * @notapi - */ -static inline void init_board(void) { - // ********************************************************************************************* - // InitSpi( ) - // - // Sets up SPI channel 0 for communications to Nokia 6610 LCD Display - // - // I/O ports used: PA2 = LCD Reset (set to low to reset) - // PA12 = LCD chip select (set to low to select the LCD chip) - // PA16 = SPI0_MISO Master In - Slave Out (not used in LCD interface) - // PA17 = SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave) - // PA18 = SPI0_SPCK Serial Clock (to LCD slave) - // PB20 = backlight control (normally PWM control, 1 = full on) - // - // *********************************************************************************************} - - /* This code should really use the ChibiOS driver for these functions */ - - // Pin for backlight - pPIOB->PIO_CODR = PIOB_LCD_BL_MASK; // Set PB20 to LOW - pPIOB->PIO_OER = PIOB_LCD_BL_MASK; // Configure PB20 as output - - // Reset pin - pPIOA->PIO_SODR = PIOA_LCD_RESET_MASK; // Set PA2 to HIGH - pPIOA->PIO_OER = PIOA_LCD_RESET_MASK; // Configure PA2 as output - - // CS pin - this seems to be ignored - // pPIOA->PIO_SODR = 1<<12; // Set PA2 to HIGH - // pPIOA->PIO_OER = 1<<12; // Configure PA2 as output - - // Init SPI0 - // Disable the following pins from PIO control (will be used instead by the SPI0 peripheral) - // BIT12 = PA12 -> SPI0_NPCS0 chip select - // BIT16 = PA16 -> SPI0_MISO Master In - Slave Out (not used in LCD interface) - // BIT17 = PA17 -> SPI0_MOSI Master Out - Slave In pin (Serial Data to LCD slave) - // BIT18 = PA18 -> SPI0_SPCK Serial Clock (to LCD slave) - pPIOA->PIO_PDR = (1<<12) | (1<<16) | (1<<17) | (1<<18); - pPIOA->PIO_ASR = (1<<12) | (1<<16) | (1<<17) | (1<<18); - pPIOA->PIO_BSR = 0; - - //enable the clock of SPI - pPMC->PMC_PCER = 1 << AT91C_ID_SPI0; - - // Fixed mode - pSPI->SPI_CR = 0x81; //SPI Enable, Software reset - pSPI->SPI_CR = 0x01; //SPI Enable - pSPI->SPI_MR = 0xE0011; //Master mode, fixed select, disable decoder, PCS=1110 - pSPI->SPI_CSR[0] = 0x01010311; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/3 = 16MHz - - /* Display backlight control at 100% */ - pwmRunning = FALSE; - palSetPad(IOPORT2, PIOB_LCD_BL); -} - -/** - * @brief Set or clear the lcd reset pin. - * - * @param[in] state TRUE = lcd in reset, FALSE = normal operation - * - * @notapi - */ -static inline void setpin_reset(bool_t state) { - if (state) - palClearPad(IOPORT1, PIOA_LCD_RESET); - else - palSetPad(IOPORT1, PIOA_LCD_RESET); -} - -/** - * @brief Set the lcd back-light level. - * @note For now 0% turns the backlight off, anything else the backlight is on. - * While the hardware supports PWM backlight control, we are not using it - * yet. - * - * @param[in] percent 0 to 100% - * - * @notapi - */ -static inline void set_backlight(uint8_t percent) { - if (percent == 100) { - /* Turn the pin on - No PWM */ - if (pwmRunning) { - pwmStop(&PWMD2); - pwmRunning = FALSE; - } - palSetPad(IOPORT2, PIOB_LCD_BL); - } else if (percent == 0) { - /* Turn the pin off - No PWM */ - if (pwmRunning) { - pwmStop(&PWMD2); - pwmRunning = FALSE; - } - palClearPad(IOPORT2, PIOB_LCD_BL); - } else { - /* Use the PWM */ - if (!pwmRunning) { - pwmStart(&PWMD2, &pwmcfg); - pwmRunning = TRUE; - } - pwmEnableChannel(&PWMD2, 0, PWM_VALUE(percent)); - } -} - -/** - * @brief Take exclusive control of the bus - * - * @notapi - */ -static inline void acquire_bus(void) { - /* Nothing to do for this board as the LCD is the only device on the SPI port */ -} - -/** - * @brief Release exclusive control of the bus - * - * @notapi - */ -static inline void release_bus(void) { - // Nothing to do for this board as the LCD is the only device on the SPI port -} - -/** - * @brief Send an 8 bit command to the lcd. - * - * @param[in] cmd The command to send - * - * @notapi - */ -static inline void write_cmd(uint16_t cmd) { - // wait for the previous transfer to complete - while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); - // send the command - pSPI->SPI_TDR = cmd & 0xFF; -} - -/** - * @brief Send an 8 bit data to the lcd. - * - * @param[in] data The data to send - * - * @notapi - */ -static inline void write_data(uint16_t data) { - // wait for the previous transfer to complete - while((pSPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); - // send the data - pSPI->SPI_TDR = data | 0x0100; -} - -#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) -/** - * @brief Read data from the lcd. - * - * @return The data from the lcd - * - * @notapi - */ -static inline uint16_t read_data(void) { - #error "gdispNokia6610GE8: GDISP_HARDWARE_READPIXEL and GDISP_HARDWARE_SCROLL are not supported on this board" - return pSPI->SPI_RDR; -} -#endif - -#endif /* _GDISP_LLD_BOARD_H */ -/** @} */ diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h deleted file mode 100644 index 43cc4830..00000000 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h - * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE8 display. - * - * @addtogroup GDISP - * @{ - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -/* - * Set various display properties. These properties mostly depend on the exact controller chip you get. - * The defaults should work for most controllers. - */ -//#define GDISP_GE8_BROKEN_CONTROLLER FALSE // Uncomment this out if you have a controller thats not window wrap broken. -//#define GDISP_SCREEN_HEIGHT 130 // The visible display height -//#define GDISP_SCREEN_WIDTH 130 // The visible display width -//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area -//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area -//#define GDISP_SLEEP_SIZE 32 // The size of the sleep mode partial display -//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display -//#define GDISP_INITIAL_CONTRAST 38 // The initial contrast percentage -//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage - -/** - * @brief Initialise the board for the display. - * @notes Performs the following functions: - * 1. initialise the spi port used by your display - * 2. initialise the reset pin (initial state not-in-reset) - * 3. initialise the chip select pin (initial state not-active) - * 4. initialise the backlight pin (initial state back-light off) - * - * @notapi - */ -static inline void init_board(void) { - -} - -/** - * @brief Set or clear the lcd reset pin. - * - * @param[in] state TRUE = lcd in reset, FALSE = normal operation - * - * @notapi - */ -static inline void setpin_reset(bool_t state) { - -} - -/** - * @brief Set the lcd back-light level. - * @note For now 0% turns the backlight off, anything else the backlight is on. - * While the hardware supports PWM backlight control, we are not using it - * yet. - * - * @param[in] percent 0 to 100% - * - * @notapi - */ -static inline void set_backlight(uint8_t percent) { - -} - -/** - * @brief Take exclusive control of the bus - * - * @notapi - */ -static inline void acquire_bus(void) { - -} - -/** - * @brief Release exclusive control of the bus - * - * @notapi - */ -static inline void release_bus(void) { - -} - -/** - * @brief Send an 8 bit command to the lcd. - * - * @param[in] cmd The command to send - * - * @notapi - */ -static inline void write_cmd(uint16_t cmd) { - -} - -/** - * @brief Send an 8 bit data to the lcd. - * - * @param[in] data The data to send - * - * @notapi - */ -static inline void write_data(uint16_t data) { - -} - -#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) -/** - * @brief Read data from the lcd. - * - * @return The data from the lcd - * @note The chip select may need to be asserted/de-asserted - * around the actual spi read - * - * @notapi - */ -static inline uint16_t read_data(void) { - -} -#endif - -#endif /* _GDISP_LLD_BOARD_H */ -/** @} */ diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h index a9e11e03..70a57d12 100644 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h @@ -22,9 +22,11 @@ /* Driver hardware support. */ /*===========================================================================*/ -#define GDISP_DRIVER_NAME "Nokia6610GE8" -#define GDISP_DRIVER_STRUCT GDISP_Nokia6610GE8 - +/* This driver has problems with other orientations and requires significantly + * extra code to handle them. By default we turn this on (only if the GDISP_NEED_CONTROL + * is turned on). If you are worried about code size and don't need orientation support + * define GDISP_NOKIA_ORIENTATION as false. + */ #ifndef GDISP_NOKIA_ORIENTATION #define GDISP_NOKIA_ORIENTATION TRUE #endif @@ -40,11 +42,6 @@ #endif #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB444 -/* This driver supports both packed and unpacked pixel formats and line formats. - * By default we leave these as FALSE. - */ -#define GDISP_PACKED_PIXELS FALSE -#define GDISP_PACKED_LINES FALSE #endif /* GFX_USE_GDISP */ |