diff options
Diffstat (limited to 'drivers/gdisp/RA8875/gdisp_lld_board_example_gpio.h')
| -rw-r--r-- | drivers/gdisp/RA8875/gdisp_lld_board_example_gpio.h | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/drivers/gdisp/RA8875/gdisp_lld_board_example_gpio.h b/drivers/gdisp/RA8875/gdisp_lld_board_example_gpio.h new file mode 100644 index 00000000..af879520 --- /dev/null +++ b/drivers/gdisp/RA8875/gdisp_lld_board_example_gpio.h @@ -0,0 +1,171 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://chibios-gfx.com/license.html + */ + +/** + * @file drivers/gdisp/SSD1963/gdisp_lld_board_example_gpio.h + * @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display. + * + * @addtogroup GDISP + * @{ + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#if defined(GDISP_USE_GPIO) + #define Set_CS palSetPad(GDISP_CMD_PORT, GDISP_CS); + #define Clr_CS palClearPad(GDISP_CMD_PORT, GDISP_CS); + #define Set_RS palSetPad(GDISP_CMD_PORT, GDISP_RS); + #define Clr_RS palClearPad(GDISP_CMD_PORT, GDISP_RS); + #define Set_WR palSetPad(GDISP_CMD_PORT, GDISP_WR); + #define Clr_WR palClearPad(GDISP_CMD_PORT, GDISP_WR); + #define Set_RD palSetPad(GDISP_CMD_PORT, GDISP_RD); + #define Clr_RD palClearPad(GDISP_CMD_PORT, GDISP_RD); +#endif + +#if defined(GDISP_USE_FSMC) + /* Using FSMC A16 as RS */ + #define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */ + #define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */ +#endif + +/** + * @brief Send data to the index register. + * + * @param[in] index The index register to set + * + * @notapi + */ +static inline void write_index(uint16_t index) { + Set_CS; Set_RS; Set_WR; Clr_RD; + palWritePort(GDISP_DATA_PORT, index); + Clr_CS; +} + +/** + * @brief Send data to the lcd. + * + * @param[in] data The data to send + * + * @notapi + */ +static inline void write_data(uint16_t data) { + Set_CS; Clr_RS; Set_WR; Clr_RD; + palWritePort(GDISP_DATA_PORT, data); + Clr_CS; +} + +/** + * @brief Initialise the board for the display. + * + * @notapi + */ +static inline void init_board(void) { + + IOBus busCMD = {GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RS) | (1 << GDISP_WR) | (1 << GDISP_RD), 0}; + IOBus busDATA = {GDISP_CMD_PORT, 0xFFFFF, 0}; + palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL); + palSetBusMode(&busDATA, PAL_MODE_OUTPUT_PUSHPULL); +} + +static inline void post_init_board(void) { + /* Nothing to do here */ +} + +/** + * @brief Set or clear the lcd reset pin. + * + * @param[in] state TRUE = lcd in reset, FALSE = normal operation + * + * @notapi + */ +static inline void setpin_reset(bool_t state) { + +} + +/** + * @brief Set the lcd back-light level. + * + * @param[in] percent 0 to 100% + * + * @notapi + */ +static inline void set_backlight(uint8_t percent) { + //duty_cycle is 00..FF + //Work in progress: the SSD1963 has a built-in PWM, its output can + //be used by a Dynamic Background Control or by a host (user) + //Check your LCD's hardware, the PWM connection is default left open and instead + //connected to a LED connection on the breakout board + write_index(SSD1963_SET_PWM_CONF);//set PWM for BackLight + write_data(0x0001); + write_data(percent & 0x00FF); + write_data(0x0001);//controlled by host (not DBC), enabled + write_data(0x00FF); + write_data(0x0060);//don't let it go too dark, avoid a useless LCD + write_data(0x000F);//prescaler ??? +} + +/** + * @brief Take exclusive control of the bus + * + * @notapi + */ +static inline void acquire_bus(void) { + /* Nothing to do here */ +} + +/** + * @brief Release exclusive control of the bus + * + * @notapi + */ +static inline void release_bus(void) { + /* Nothing to do here */ +} + +__inline void write_stream(uint16_t *buffer, uint16_t size) { + uint16_t i; + Set_CS; Clr_RS; Set_WR; Clr_RD; + for(i = 0; i < size; i++) { + Set_WR; + palWritePort(GDISP_DATA_PORT, buffer[i]); + Clr_WR; + } + Clr_CS; +} + +__inline void read_stream(uint16_t *buffer, size_t size) { + uint16_t i; + Set_CS; Clr_RS; Clr_WR; Set_RD; + for(i = 0; i < size; i++) { + Set_RD; + buffer[i] = palReadPort(GDISP_DATA_PORT); + Clr_RD; + } +} + +#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) +/** + * @brief Read data from the lcd. + * + * @return The data from the lcd + * @note The chip select may need to be asserted/de-asserted + * around the actual spi read + * + * @notapi + */ +static inline uint16_t read_data(void) { + Set_CS; Clr_RS; Clr_WR; Set_RD; + uint16_t data = palReadPort(GDISP_DATA_PORT); + Clr_CS; + return data; +} +#endif + +#endif /* _GDISP_LLD_BOARD_H */ +/** @} */ + |