aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h')
-rw-r--r--drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h111
1 files changed, 111 insertions, 0 deletions
diff --git a/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h b/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h
new file mode 100644
index 00000000..f8381b65
--- /dev/null
+++ b/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board.h
@@ -0,0 +1,111 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://chibios-gfx.com/license.html
+ */
+
+/**
+ * @file drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_.h
+ * @brief GINPUT Touch low level driver source for the FT5x06.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+/* I2C interface #2 - Touchscreen controller */
+static const I2CConfig i2ccfg2 = {
+ OPMODE_I2C,
+ 400000,
+ FAST_DUTY_CYCLE_2,
+};
+
+/**
+ * @brief Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static void init_board(void) {
+ i2cStart(&I2CD2, &i2ccfg2);
+}
+
+
+/**
+ * @brief Write a value into a certain register
+ *
+ * @param[in] reg The register address
+ * @param[in] n The amount of bytes (one or two)
+ * @param[in] val The value
+ *
+ * @notapi
+ */
+static void write_reg(uint8_t reg, uint8_t n, uint16_t val) {
+ uint8_t txbuf[3];
+
+ i2cAcquireBus(&I2CD2);
+
+ txbuf[0] = reg;
+
+ if (n == 1) {
+ txbuf[1] = val;
+ i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 2, NULL, 0, MS2ST(FT5x06_TIMEOUT));
+ } else if (n == 2) {
+ txbuf[1] = ((val & 0xFF00) >> 8);
+ txbuf[2] = (val & 0x00FF);
+ i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 3, NULL, 0, MS2ST(FT5x06_TIMEOUT));
+ }
+
+ i2cReleaseBus(&I2CD2);
+}
+
+/**
+ * @brief Read the value of a certain register
+ *
+ * @param[in] reg The register address
+ * @param[in] n The amount of bytes (one or two)
+ *
+ * @return Data read from device (one byte or two depending on n param)
+ *
+ * @notapi
+ */
+static uint16_t read_reg(uint8_t reg, uint8_t n) {
+ uint8_t txbuf[1], rxbuf[2];
+ uint16_t ret;
+
+ rxbuf[0] = 0;
+ rxbuf[1] = 0;
+
+ i2cAcquireBus(&I2CD2);
+
+ txbuf[0] = reg;
+ i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 1, rxbuf, n, MS2ST(FT5x06_TIMEOUT));
+
+ if (n == 1) {
+ ret = rxbuf[0];
+ } else if (n == 2) {
+ ret = ((rxbuf[0] << 8) | (rxbuf[1] & 0xFF));
+ }
+
+ i2cReleaseBus(&I2CD2);
+
+ return ret;
+}
+
+static void read_reg_n(uint8_t reg, uint8_t n, uint8_t *rxbuf) {
+ uint8_t txbuf[1];
+
+ i2cAcquireBus(&I2CD2);
+
+ txbuf[0] = reg;
+ i2cMasterTransmitTimeout(&I2CD2, FT5x06_ADDR, txbuf, 1, rxbuf, n, MS2ST(FT5x06_TIMEOUT));
+
+ i2cReleaseBus(&I2CD2);
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
+