24 files changed, 728 insertions, 0 deletions
diff --git a/tests/arch/xilinx/.gitignore b/tests/arch/xilinx/.gitignore
new file mode 100644
index 000000000..c99b79371
--- /dev/null
+++ b/tests/arch/xilinx/.gitignore
@@ -0,0 +1,5 @@
+/*.log
+/*.out
+/run-test.mk
+/*_uut.v
+/test_macc
diff --git a/tests/arch/xilinx/add_sub.ys b/tests/arch/xilinx/add_sub.ys
new file mode 100644
index 000000000..9dbddce47
--- /dev/null
+++ b/tests/arch/xilinx/add_sub.ys
@@ -0,0 +1,11 @@
+read_verilog ../common/add_sub.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 14 t:LUT2
+select -assert-count 6 t:MUXCY
+select -assert-count 8 t:XORCY
+select -assert-none t:LUT2 t:MUXCY t:XORCY %% t:* %D
+
diff --git a/tests/arch/xilinx/adffs.ys b/tests/arch/xilinx/adffs.ys
new file mode 100644
index 000000000..12c34415e
--- /dev/null
+++ b/tests/arch/xilinx/adffs.ys
@@ -0,0 +1,51 @@
+read_verilog ../common/adffs.v
+design -save read
+
+hierarchy -top adff
+proc
+equiv_opt -async2sync  -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adff # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDCE
+
+select -assert-none t:BUFG t:FDCE %% t:* %D
+
+
+design -load read
+hierarchy -top adffn
+proc
+equiv_opt -async2sync  -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adffn # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDCE
+select -assert-count 1 t:LUT1
+
+select -assert-none t:BUFG t:FDCE t:LUT1 %% t:* %D
+
+
+design -load read
+hierarchy -top dffs
+proc
+equiv_opt -async2sync  -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffs # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:LUT2
+
+select -assert-none t:BUFG t:FDRE t:LUT2 %% t:* %D
+
+
+design -load read
+hierarchy -top ndffnr
+proc
+equiv_opt -async2sync  -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd ndffnr # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE_1
+select -assert-count 1 t:LUT2
+
+select -assert-none t:BUFG t:FDRE_1 t:LUT2 %% t:* %D
diff --git a/tests/arch/xilinx/counter.ys b/tests/arch/xilinx/counter.ys
new file mode 100644
index 000000000..57b645d19
--- /dev/null
+++ b/tests/arch/xilinx/counter.ys
@@ -0,0 +1,14 @@
+read_verilog ../common/counter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -async2sync -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:BUFG
+select -assert-count 8 t:FDCE
+select -assert-count 1 t:LUT1
+select -assert-count 7 t:MUXCY
+select -assert-count 8 t:XORCY
+select -assert-none t:BUFG t:FDCE t:LUT1 t:MUXCY t:XORCY %% t:* %D
diff --git a/tests/arch/xilinx/dffs.ys b/tests/arch/xilinx/dffs.ys
new file mode 100644
index 000000000..0bba4858f
--- /dev/null
+++ b/tests/arch/xilinx/dffs.ys
@@ -0,0 +1,25 @@
+read_verilog ../common/dffs.v
+design -save read
+
+hierarchy -top dff
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+
+select -assert-none t:BUFG t:FDRE %% t:* %D
+
+
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+
+select -assert-none t:BUFG t:FDRE %% t:* %D
+
diff --git a/tests/arch/xilinx/dsp_simd.ys b/tests/arch/xilinx/dsp_simd.ys
new file mode 100644
index 000000000..956952327
--- /dev/null
+++ b/tests/arch/xilinx/dsp_simd.ys
@@ -0,0 +1,25 @@
+read_verilog <<EOT
+module simd(input [12*4-1:0] a, input [12*4-1:0] b, (* use_dsp="simd" *) output [7*12-1:0] o12, (* use_dsp="simd" *) output [2*24-1:0] o24);
+generate
+    genvar i;
+    // 4 x 12-bit adder
+    for (i = 0; i < 4; i++)
+        assign o12[i*12+:12] = a[i*12+:12] + b[i*12+:12];
+    // 2 x 24-bit subtract
+    for (i = 0; i < 2; i++)
+        assign o24[i*24+:24] = a[i*24+:24] - b[i*24+:24];
+endgenerate
+reg [3*12-1:0] ro;
+always @* begin
+    ro[0*12+:12] = a[0*10+:10] + b[0*10+:10];
+    ro[1*12+:12] = a[1*10+:10] + b[1*10+:10];
+    ro[2*12+:12] = a[2*8+:8] + b[2*8+:8];
+end
+assign o12[4*12+:3*12] = ro;
+endmodule
+EOT
+
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx
+design -load postopt
+select -assert-count 3 t:DSP48E1
diff --git a/tests/arch/xilinx/fsm.ys b/tests/arch/xilinx/fsm.ys
new file mode 100644
index 000000000..2a72c34e8
--- /dev/null
+++ b/tests/arch/xilinx/fsm.ys
@@ -0,0 +1,18 @@
+read_verilog ../common/fsm.v
+hierarchy -top fsm
+proc
+flatten
+
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -make_assert -flatten gold gate miter
+sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:BUFG
+select -assert-count 5 t:FDRE
+select -assert-count 1 t:LUT3
+select -assert-count 2 t:LUT4
+select -assert-count 4 t:LUT6
+select -assert-none t:BUFG t:FDRE t:LUT3 t:LUT4 t:LUT6 %% t:* %D
diff --git a/tests/arch/xilinx/latches.ys b/tests/arch/xilinx/latches.ys
new file mode 100644
index 000000000..fe7887e8d
--- /dev/null
+++ b/tests/arch/xilinx/latches.ys
@@ -0,0 +1,35 @@
+read_verilog ../common/latches.v
+design -save read
+
+hierarchy -top latchp
+proc
+equiv_opt -async2sync -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd latchp # Constrain all select calls below inside the top module
+select -assert-count 1 t:LDCE
+
+select -assert-none t:LDCE %% t:* %D
+
+
+design -load read
+hierarchy -top latchn
+proc
+equiv_opt -async2sync -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd latchn # Constrain all select calls below inside the top module
+select -assert-count 1 t:LDCE
+select -assert-count 1 t:LUT1
+
+select -assert-none t:LDCE t:LUT1 %% t:* %D
+
+
+design -load read
+hierarchy -top latchsr
+proc
+equiv_opt -async2sync -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd latchsr # Constrain all select calls below inside the top module
+select -assert-count 1 t:LDCE
+select -assert-count 2 t:LUT3
+
+select -assert-none t:LDCE t:LUT3 %% t:* %D
diff --git a/tests/arch/xilinx/logic.ys b/tests/arch/xilinx/logic.ys
new file mode 100644
index 000000000..c0f6da302
--- /dev/null
+++ b/tests/arch/xilinx/logic.ys
@@ -0,0 +1,11 @@
+read_verilog ../common/logic.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:LUT1
+select -assert-count 6 t:LUT2
+select -assert-count 2 t:LUT4
+select -assert-none t:LUT1 t:LUT2 t:LUT4 %% t:* %D
diff --git a/tests/arch/xilinx/macc.sh b/tests/arch/xilinx/macc.sh
new file mode 100644
index 000000000..2272679ee
--- /dev/null
+++ b/tests/arch/xilinx/macc.sh
@@ -0,0 +1,3 @@
+../../../yosys -qp "synth_xilinx -top macc2; rename -top macc2_uut" macc.v -o macc_uut.v
+iverilog -o test_macc macc_tb.v macc_uut.v macc.v ../../../techlibs/xilinx/cells_sim.v
+vvp -N ./test_macc
diff --git a/tests/arch/xilinx/macc.v b/tests/arch/xilinx/macc.v
new file mode 100644
index 000000000..e36b2bab1
--- /dev/null
+++ b/tests/arch/xilinx/macc.v
@@ -0,0 +1,84 @@
+// Signed 40-bit streaming accumulator with 16-bit inputs
+// File: HDL_Coding_Techniques/multipliers/multipliers4.v
+//
+// Source:
+// https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug901-vivado-synthesis.pdf p.90
+//
+module macc # (parameter SIZEIN = 16, SIZEOUT = 40) (
+	input clk, ce, sload,
+	input signed [SIZEIN-1:0] a, b,
+	output signed [SIZEOUT-1:0] accum_out
+);
+// Declare registers for intermediate values
+reg signed [SIZEIN-1:0] a_reg, b_reg;
+reg sload_reg;
+reg signed [2*SIZEIN-1:0] mult_reg;
+reg signed [SIZEOUT-1:0] adder_out, old_result;
+always @* /*(adder_out or sload_reg)*/ begin // Modification necessary to fix sim/synth mismatch
+	if (sload_reg)
+		old_result <= 0;
+	else
+		// 'sload' is now active (=low) and opens the accumulation loop.
+		// The accumulator takes the next multiplier output in
+		// the same cycle.
+		old_result <= adder_out;
+end
+
+always @(posedge clk)
+	if (ce)
+	begin
+		a_reg <= a;
+		b_reg <= b;
+		mult_reg <= a_reg * b_reg;
+		sload_reg <= sload;
+		// Store accumulation result into a register
+		adder_out <= old_result + mult_reg;
+	end
+
+// Output accumulation result
+assign accum_out = adder_out;
+
+endmodule
+
+// Adapted variant of above
+module macc2 # (parameter SIZEIN = 16, SIZEOUT = 40) (
+	input clk,
+	input ce,
+	input rst,
+	input signed [SIZEIN-1:0] a, b,
+	output signed [SIZEOUT-1:0] accum_out,
+	output overflow
+);
+// Declare registers for intermediate values
+reg signed [SIZEIN-1:0] a_reg, b_reg, a_reg2, b_reg2;
+reg signed [2*SIZEIN-1:0] mult_reg = 0;
+reg signed [SIZEOUT:0] adder_out = 0;
+reg overflow_reg;
+always @(posedge clk) begin
+	//if (ce)
+	begin
+		a_reg <= a;
+		b_reg <= b;
+		a_reg2 <= a_reg;
+		b_reg2 <= b_reg;
+		mult_reg <= a_reg2 * b_reg2;
+		// Store accumulation result into a register
+		adder_out <= adder_out + mult_reg;
+		overflow_reg <= overflow;
+	end
+	if (rst) begin
+		a_reg <= 0;
+		a_reg2 <= 0;
+		b_reg <= 0;
+		b_reg2 <= 0;
+		mult_reg <= 0;
+		adder_out <= 0;
+		overflow_reg <= 1'b0;
+	end
+end
+assign overflow = (adder_out >= 2**(SIZEOUT-1)) | overflow_reg;
+
+// Output accumulation result
+assign accum_out = overflow ? 2**(SIZEOUT-1)-1 : adder_out;
+
+endmodule
diff --git a/tests/arch/xilinx/macc.ys b/tests/arch/xilinx/macc.ys
new file mode 100644
index 000000000..6e884b35a
--- /dev/null
+++ b/tests/arch/xilinx/macc.ys
@@ -0,0 +1,31 @@
+read_verilog macc.v
+design -save read
+
+hierarchy -top macc
+proc
+#equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx ### TODO
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd macc # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:DSP48E1
+select -assert-none t:BUFG t:FDRE t:DSP48E1 %% t:* %D
+
+design -load read
+hierarchy -top macc2
+proc
+#equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx ### TODO
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd macc2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48E1
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:LUT2
+select -assert-count 41 t:LUT3
+select -assert-none t:BUFG t:DSP48E1 t:FDRE t:LUT2 t:LUT3 %% t:* %D
diff --git a/tests/arch/xilinx/macc_tb.v b/tests/arch/xilinx/macc_tb.v
new file mode 100644
index 000000000..64aed05c4
--- /dev/null
+++ b/tests/arch/xilinx/macc_tb.v
@@ -0,0 +1,96 @@
+`timescale 1ns / 1ps
+
+module testbench;
+
+    parameter SIZEIN = 16, SIZEOUT = 40;
+	reg clk, ce, rst;
+   	reg signed [SIZEIN-1:0] a, b;
+	output signed [SIZEOUT-1:0] REF_accum_out, accum_out;
+	output REF_overflow, overflow;
+
+	integer errcount = 0;
+
+	reg ERROR_FLAG = 0;
+
+	task clkcycle;
+		begin
+			#5;
+			clk = ~clk;
+			#10;
+			clk = ~clk;
+			#2;
+			ERROR_FLAG = 0;
+			if (REF_accum_out !== accum_out) begin
+				$display("ERROR at %1t: REF_accum_out=%b UUT_accum_out=%b DIFF=%b", $time, REF_accum_out, accum_out, REF_accum_out ^ accum_out);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_overflow !== overflow) begin
+				$display("ERROR at %1t: REF_overflow=%b UUT_overflow=%b DIFF=%b", $time, REF_overflow, overflow, REF_overflow ^ overflow);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			#3;
+		end
+	endtask
+
+	initial begin
+		//$dumpfile("test_macc.vcd");
+		//$dumpvars(0, testbench);
+
+		#2;
+		clk = 1'b0;
+        ce = 1'b0;
+        a = 0;
+        b = 0;
+
+        rst = 1'b1;
+		repeat (10) begin
+			#10;
+			clk = 1'b1;
+			#10;
+			clk = 1'b0;
+			#10;
+			clk = 1'b1;
+			#10;
+			clk = 1'b0;
+		end
+		rst = 1'b0;
+
+		repeat (10000) begin
+			clkcycle;
+            ce = 1; //$urandom & $urandom;
+			//rst = $urandom & $urandom & $urandom & $urandom & $urandom & $urandom;
+			a = $urandom & ~(1 << (SIZEIN-1));
+			b = $urandom & ~(1 << (SIZEIN-1));
+		end
+
+		if (errcount == 0) begin
+			$display("All tests passed.");
+			$finish;
+		end else begin
+			$display("Caught %1d errors.", errcount);
+			$stop;
+		end
+	end
+
+	macc2 ref (
+        .clk(clk),
+        .ce(ce),
+        .rst(rst),
+        .a(a),
+        .b(b),
+        .accum_out(REF_accum_out),
+        .overflow(REF_overflow)
+	);
+
+	macc2_uut uut (
+        .clk(clk),
+        .ce(ce),
+        .rst(rst),
+        .a(a),
+        .b(b),
+        .accum_out(accum_out),
+        .overflow(overflow)
+	);
+endmodule
diff --git a/tests/arch/xilinx/memory.ys b/tests/arch/xilinx/memory.ys
new file mode 100644
index 000000000..da1ed0e49
--- /dev/null
+++ b/tests/arch/xilinx/memory.ys
@@ -0,0 +1,17 @@
+read_verilog ../common/memory.v
+hierarchy -top top
+proc
+memory -nomap
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+memory
+opt -full
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 5 -set-init-zero -show-inputs -show-outputs miter
+
+design -load postopt
+cd top
+select -assert-count 1 t:BUFG
+select -assert-count 8 t:FDRE
+select -assert-count 8 t:RAM64X1D
+select -assert-none t:BUFG t:FDRE t:RAM64X1D %% t:* %D
diff --git a/tests/arch/xilinx/mul.ys b/tests/arch/xilinx/mul.ys
new file mode 100644
index 000000000..d76814966
--- /dev/null
+++ b/tests/arch/xilinx/mul.ys
@@ -0,0 +1,9 @@
+read_verilog ../common/mul.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:DSP48E1
+select -assert-none t:DSP48E1 %% t:* %D
diff --git a/tests/arch/xilinx/mul_unsigned.v b/tests/arch/xilinx/mul_unsigned.v
new file mode 100644
index 000000000..e3713a642
--- /dev/null
+++ b/tests/arch/xilinx/mul_unsigned.v
@@ -0,0 +1,30 @@
+/*
+Example from: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug901-vivado-synthesis.pdf [p. 89].
+*/
+
+// Unsigned 16x24-bit Multiplier
+// 1 latency stage on operands
+// 3 latency stage after the multiplication
+// File: multipliers2.v
+//
+module mul_unsigned (clk, A, B, RES);
+parameter WIDTHA = /*16*/ 6;
+parameter WIDTHB = /*24*/ 9;
+input clk;
+input [WIDTHA-1:0] A;
+input [WIDTHB-1:0] B;
+output [WIDTHA+WIDTHB-1:0] RES;
+reg [WIDTHA-1:0] rA;
+reg [WIDTHB-1:0] rB;
+reg [WIDTHA+WIDTHB-1:0] M [3:0];
+integer i;
+always @(posedge clk)
+ begin
+ rA <= A;
+ rB <= B;
+ M[0] <= rA * rB;
+ for (i = 0; i < 3; i = i+1)
+ M[i+1] <= M[i];
+ end
+assign RES = M[3];
+endmodule
diff --git a/tests/arch/xilinx/mul_unsigned.ys b/tests/arch/xilinx/mul_unsigned.ys
new file mode 100644
index 000000000..62495b90c
--- /dev/null
+++ b/tests/arch/xilinx/mul_unsigned.ys
@@ -0,0 +1,11 @@
+read_verilog mul_unsigned.v
+hierarchy -top mul_unsigned
+proc
+
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mul_unsigned # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48E1
+select -assert-count 30 t:FDRE
+select -assert-none t:DSP48E1 t:FDRE t:BUFG %% t:* %D
diff --git a/tests/arch/xilinx/mux.ys b/tests/arch/xilinx/mux.ys
new file mode 100644
index 000000000..821d0fab7
--- /dev/null
+++ b/tests/arch/xilinx/mux.ys
@@ -0,0 +1,45 @@
+read_verilog ../common/mux.v
+design -save read
+
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:LUT3
+
+select -assert-none t:LUT3 %% t:* %D
+
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 1 t:LUT6
+
+select -assert-none t:LUT6 %% t:* %D
+
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 1 t:LUT3
+select -assert-count 2 t:LUT6
+
+select -assert-none t:LUT3 t:LUT6 %% t:* %D
+
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-count 5 t:LUT6
+
+select -assert-none t:LUT6 %% t:* %D
diff --git a/tests/arch/xilinx/pmgen_xilinx_srl.ys b/tests/arch/xilinx/pmgen_xilinx_srl.ys
new file mode 100644
index 000000000..ea2f20487
--- /dev/null
+++ b/tests/arch/xilinx/pmgen_xilinx_srl.ys
@@ -0,0 +1,57 @@
+read_verilog -icells <<EOT
+module \$__XILINX_SHREG_ (input C, input D, input [31:0] L, input E, output Q, output SO);
+  parameter DEPTH = 1;
+  parameter [DEPTH-1:0] INIT = 0;
+  parameter CLKPOL = 1;
+  parameter ENPOL = 2;
+
+  wire pos_clk = C == CLKPOL;
+  reg pos_en;
+  always @(E)
+    if (ENPOL == 2) pos_en = 1'b1;
+    else pos_en = (E == ENPOL[0]);
+
+  reg [DEPTH-1:0] r;
+  always @(posedge pos_clk)
+    if (pos_en)
+      r <= {r[DEPTH-2:0], D};
+
+  assign Q = r[L];
+  assign SO = r[DEPTH-1];
+endmodule
+EOT
+read_verilog +/xilinx/cells_sim.v
+proc
+design -save model
+
+test_pmgen -generate xilinx_srl.fixed
+hierarchy -top pmtest_xilinx_srl_pm_fixed
+flatten; opt_clean
+
+design -save gold
+xilinx_srl -fixed
+techmap -autoproc -map %model
+design -stash gate
+
+design -copy-from gold -as gold pmtest_xilinx_srl_pm_fixed
+design -copy-from gate -as gate pmtest_xilinx_srl_pm_fixed
+dff2dffe -unmap # sat does not support flops-with-enable yet
+miter -equiv -flatten -make_assert gold gate miter
+sat -set-init-zero -seq 5 -verify -prove-asserts miter
+
+design -load model
+
+test_pmgen -generate xilinx_srl.variable
+hierarchy -top pmtest_xilinx_srl_pm_variable
+flatten; opt_clean
+
+design -save gold
+xilinx_srl -variable
+techmap -autoproc -map %model
+design -stash gate
+
+design -copy-from gold -as gold pmtest_xilinx_srl_pm_variable
+design -copy-from gate -as gate pmtest_xilinx_srl_pm_variable
+dff2dffe -unmap # sat does not support flops-with-enable yet
+miter -equiv -flatten -make_assert gold gate miter
+sat -set-init-zero -seq 5 -verify -prove-asserts miter
diff --git a/tests/arch/xilinx/run-test.sh b/tests/arch/xilinx/run-test.sh
new file mode 100755
index 000000000..bf19b887d
--- /dev/null
+++ b/tests/arch/xilinx/run-test.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+set -e
+{
+echo "all::"
+for x in *.ys; do
+	echo "all:: run-$x"
+	echo "run-$x:"
+	echo "	@echo 'Running $x..'"
+	echo "	@../../../yosys -ql ${x%.ys}.log -w 'Yosys has only limited support for tri-state logic at the moment.' $x"
+done
+for s in *.sh; do
+	if [ "$s" != "run-test.sh" ]; then
+		echo "all:: run-$s"
+		echo "run-$s:"
+		echo "	@echo 'Running $s..'"
+		echo "	@bash $s"
+	fi
+done
+} > run-test.mk
+exec ${MAKE:-make} -f run-test.mk
diff --git a/tests/arch/xilinx/shifter.ys b/tests/arch/xilinx/shifter.ys
new file mode 100644
index 000000000..455437f18
--- /dev/null
+++ b/tests/arch/xilinx/shifter.ys
@@ -0,0 +1,11 @@
+read_verilog ../common/shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:BUFG
+select -assert-count 8 t:FDRE
+select -assert-none t:BUFG t:FDRE %% t:* %D
diff --git a/tests/arch/xilinx/tribuf.ys b/tests/arch/xilinx/tribuf.ys
new file mode 100644
index 000000000..4697703ca
--- /dev/null
+++ b/tests/arch/xilinx/tribuf.ys
@@ -0,0 +1,12 @@
+read_verilog ../common/tribuf.v
+hierarchy -top tristate
+proc
+tribuf
+flatten
+synth
+equiv_opt -assert -map +/xilinx/cells_sim.v -map +/simcells.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd tristate # Constrain all select calls below inside the top module
+# TODO :: Tristate logic not yet supported; see https://github.com/YosysHQ/yosys/issues/1225
+select -assert-count 1 t:$_TBUF_
+select -assert-none t:$_TBUF_ %% t:* %D
diff --git a/tests/arch/xilinx/xilinx_srl.v b/tests/arch/xilinx/xilinx_srl.v
new file mode 100644
index 000000000..bc2a15ab2
--- /dev/null
+++ b/tests/arch/xilinx/xilinx_srl.v
@@ -0,0 +1,40 @@
+module xilinx_srl_static_test(input i, clk, output [1:0] q);
+reg head = 1'b0;
+reg [3:0] shift1 = 4'b0000;
+reg [3:0] shift2 = 4'b0000;
+
+always @(posedge clk) begin
+    head <= i;
+    shift1 <= {shift1[2:0], head};
+    shift2 <= {shift2[2:0], head};
+end
+
+assign q = {shift2[3], shift1[3]};
+endmodule
+
+module xilinx_srl_variable_test(input i, clk, input [1:0] l1, l2, output [1:0] q);
+reg head = 1'b0;
+reg [3:0] shift1 = 4'b0000;
+reg [3:0] shift2 = 4'b0000;
+
+always @(posedge clk) begin
+    head <= i;
+    shift1 <= {shift1[2:0], head};
+    shift2 <= {shift2[2:0], head};
+end
+
+assign q = {shift2[l2], shift1[l1]};
+endmodule
+
+module $__XILINX_SHREG_(input C, D, E, input [1:0] L, output Q);
+parameter CLKPOL = 1;
+parameter ENPOL = 1;
+parameter DEPTH = 1;
+parameter [DEPTH-1:0] INIT = {DEPTH{1'b0}};
+reg [DEPTH-1:0] r = INIT;
+wire clk = C ^ CLKPOL;
+always @(posedge C)
+    if (E) 
+        r <= { r[DEPTH-2:0], D };
+assign Q = r[L];
+endmodule
diff --git a/tests/arch/xilinx/xilinx_srl.ys b/tests/arch/xilinx/xilinx_srl.ys
new file mode 100644
index 000000000..b8df0e55a
--- /dev/null
+++ b/tests/arch/xilinx/xilinx_srl.ys
@@ -0,0 +1,67 @@
+read_verilog xilinx_srl.v
+design -save read
+
+design -copy-to model $__XILINX_SHREG_
+hierarchy -top xilinx_srl_static_test
+prep
+design -save gold
+
+techmap
+xilinx_srl -fixed
+opt
+
+# stat
+# show -width
+select -assert-count 1 t:$_DFF_P_
+select -assert-count 2 t:$__XILINX_SHREG_
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+design -copy-from model -as $__XILINX_SHREG_ \$__XILINX_SHREG_
+prep
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+dump gate
+sat -verify -prove-asserts -show-ports -seq 5 miter
+
+#design -load gold
+#stat
+
+#design -load gate
+#stat
+
+##########
+
+design -load read
+design -copy-to model $__XILINX_SHREG_
+hierarchy -top xilinx_srl_variable_test
+prep
+design -save gold
+
+xilinx_srl -variable
+opt
+
+#stat
+# show -width
+# write_verilog -noexpr -norename
+select -assert-count 1 t:$dff
+select -assert-count 1 t:$dff r:WIDTH=1 %i
+select -assert-count 2 t:$__XILINX_SHREG_
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+design -copy-from model -as $__XILINX_SHREG_ \$__XILINX_SHREG_
+prep
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports -seq 5 miter
+
+# design -load gold
+# stat
+
+# design -load gate
+# stat