diff options
author | John Crispin <blogic@openwrt.org> | 2015-09-14 20:08:39 +0000 |
---|---|---|
committer | John Crispin <blogic@openwrt.org> | 2015-09-14 20:08:39 +0000 |
commit | a93e373506672af2b6b76e723c77cc19449c35c9 (patch) | |
tree | 1c21dfe99ff9172b25e3e049c6274552475795b3 /target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh | |
parent | 87c501f518fe81026c029fc999d1bc37f893ac6e (diff) | |
download | master-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.tar.gz master-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.tar.bz2 master-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.zip |
lantiq: get more status information from xDSL
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46917 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh')
-rwxr-xr-x[-rw-r--r--] | target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh | 412 |
1 files changed, 400 insertions, 12 deletions
diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh index 56b8652588..7809d01dd8 100644..100755 --- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh +++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh @@ -19,6 +19,9 @@ dsl_cmd() { dsl_val() { echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*') } +dsl_string() { + echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))') +} # # Simple divide by 10 routine to cope with one decimal place @@ -49,6 +52,16 @@ scale() { fi } +scale_latency() { + local val=$1 + local a + local b + + a=$(expr $val / 100) + b=$(expr $val % 100) + printf "%d.%d ms" ${a} ${b} +} + # # Read the data rates for both directions # @@ -77,7 +90,7 @@ data_rates() { echo "dsl.data_rate_down_s=\"$sdrd\"" echo "dsl.data_rate_up_s=\"$sdru\"" else - echo "Data Rate: ${sdrd}/s / ${sdru}/s" + echo "Data Rate: Down: ${sdrd}/s / Up: ${sdru}/s" fi } @@ -92,11 +105,340 @@ chipset() { vig=$(dsl_cmd vig) cs=$(dsl_val "$vig" DSL_ChipSetType) csv=$(dsl_val "$vig" DSL_ChipSetHWVersion) + csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion) + csapi=$(dsl_val "$vig" DSL_DriverVersionApi) if [ "$action" = "lucistat" ]; then echo "dsl.chipset=\"${cs} ${csv}\"" + echo "dsl.firmware_version=\"${csfw}\"" + echo "dsl.api_version=\"${csapi}\"" else - echo "Chipset: ${cs} ${csv}" + echo "Chipset: ${cs} ${csv}" + echo "Firmware Version: ${csfw}" + echo "API Version: ${csapi}" + fi +} + +# +# Vendor information +# +vendor() { + local lig + local vid + local svid + + lig=$(dsl_cmd g997lig 1) + vid=$(dsl_string "$lig" G994VendorID) + svid=$(dsl_string "$lig" SystemVendorID) + + if [ "$action" = "lucistat" ]; then + echo "dsl.atuc_vendor_id=\"${vid}\"" + echo "dsl.atuc_system_vendor_id=\"${svid}\"" + else + echo "ATU-C Vendor ID: ${vid}" + echo "ATU-C System Vendor ID: ${svid}" + fi +} + +# +# XTSE capabilities +# +xtse() { + local xtusesg + local xtse1 + local xtse2 + local xtse3 + local xtse4 + local xtse5 + local xtse6 + local xtse7 + local xtse8 + + local xtse_s="" + + local annex_s="" + local line_mode_s="" + local cmd="" + + xtusesg=$(dsl_cmd g997xtusesg) + xtse1=$(dsl_val "$xtusesg" XTSE1) + xtse2=$(dsl_val "$xtusesg" XTSE2) + xtse3=$(dsl_val "$xtusesg" XTSE3) + xtse4=$(dsl_val "$xtusesg" XTSE4) + xtse5=$(dsl_val "$xtusesg" XTSE5) + xtse6=$(dsl_val "$xtusesg" XTSE6) + xtse7=$(dsl_val "$xtusesg" XTSE7) + xtse8=$(dsl_val "$xtusesg" XTSE8) + + # Evaluate Annex (according to G.997.1, 7.3.1.1.1) + if [ $((xtse1 & 13)) != 0 \ + -o $((xtse2 & 1)) != 0 \ + -o $((xtse3 & 12)) != 0 \ + -o $((xtse4 & 3)) != 0 \ + -o $((xtse6 & 3)) != 0 \ + -o $((xtse8 & 1)) != 0 ]; then + annex_s=" A," + fi + + if [ $((xtse1 & 48)) != 0 \ + -o $((xtse2 & 2)) != 0 \ + -o $((xtse3 & 48)) != 0 \ + -o $((xtse6 & 12)) != 0 \ + -o $((xtse8 & 2)) != 0 ]; then + annex_s="$annex_s B," + fi + + if [ $((xtse1 & 194)) != 0 \ + -o $((xtse2 & 12)) != 0 \ + -o $((xtse8 & 4)) != 0 ]; then + annex_s="$annex_s C," + fi + + if [ $((xtse4 & 48)) != 0 \ + -o $((xtse5 & 3)) != 0 \ + -o $((xtse6 & 192)) != 0 ]; then + annex_s="$annex_s I," + fi + + if [ $((xtse4 & 192)) != 0 \ + -o $((xtse7 & 3)) != 0 ]; then + annex_s="$annex_s J," + fi + + if [ $((xtse5 & 60)) != 0 ]; then + annex_s="$annex_s L," + fi + + if [ $((xtse5 & 192)) != 0 \ + -o $((xtse7 & 12)) != 0 ]; then + annex_s="$annex_s M," + fi + + annex_s=`echo ${annex_s:1}` + annex_s=`echo ${annex_s%?}` + + # Evaluate Line Mode (according to G.997.1, 7.3.1.1.1) + + # Regional standard: ANSI T1.413 + if [ $((xtse1 & 1)) != 0 ]; then + line_mode_s=" T1.413," + fi + + # Regional standard: TS 101 388 + if [ $((xtse1 & 1)) != 0 ]; then + line_mode_s="$line_mode_s TS 101 388," + fi + + if [ $((xtse1 & 252)) != 0 ]; then + line_mode_s="$line_mode_s G.992.1 (ADSL)," + fi + + if [ $((xtse2 & 15)) != 0 ]; then + line_mode_s="$line_mode_s G.992.2 (ADSL lite)," + fi + + if [ $((xtse3 & 60)) != 0 \ + -o $((xtse4 & 240)) != 0 \ + -o $((xtse5 & 252)) != 0 ]; then + line_mode_s="$line_mode_s G.992.3 (ADSL2)," + fi + + if [ $((xtse4 & 3)) != 0 \ + -o $((xtse5 & 3)) != 0 ]; then + line_mode_s="$line_mode_s G.992.4 (ADSL2 lite)," + fi + + if [ $((xtse6 & 199)) != 0 \ + -o $((xtse7 & 15)) != 0 ]; then + line_mode_s="$line_mode_s G.992.5 (ADSL2+)," + fi + + if [ $((xtse8 & 7)) != 0 ]; then + line_mode_s="$line_mode_s G.993.2 (VDSL2)," + fi + + #!!! PROPRIETARY & INTERMEDIATE USE !!! + if [ $((xtse8 & 128)) != 0 ]; then + line_mode_s="$line_mode_s G.993.1 (VDSL)," + fi + + line_mode_s=`echo ${line_mode_s:1}` + line_mode_s=`echo ${line_mode_s%?}` + + xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}" + + if [ "$action" = "lucistat" ]; then + echo "dsl.xtse1=$xtse1" + echo "dsl.xtse2=$xtse2" + echo "dsl.xtse3=$xtse3" + echo "dsl.xtse4=$xtse4" + echo "dsl.xtse5=$xtse5" + echo "dsl.xtse6=$xtse6" + echo "dsl.xtse7=$xtse7" + echo "dsl.xtse8=$xtse8" + echo "dsl.xtse_s=\"$xtse_s\"" + echo "dsl.annex_s=\"${annex_s}\"" + echo "dsl.line_mode_s=\"${line_mode_s}\"" + else + echo "XTSE Capabilities: ${xtse_s}" + echo "Annex: ${annex_s}" + echo "Line Mode: ${line_mode_s}" + fi +} + +# +# Power Management Mode +# +power_mode() { + local pmsg=$(dsl_cmd g997pmsg) + local pm=$(dsl_val "$pmsg" nPowerManagementStatus); + local s; + + case "$pm" in + "-1") s="Power management state is not available" ;; + "0") s="L0 - Synchronized" ;; + "1") s="L1 - Power Down Data transmission (G.992.2)" ;; + "2") s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;; + "3") s="L3 - No power" ;; + *) s="unknown" ;; + esac + + if [ "$action" = "lucistat" ]; then + echo "dsl.power_mode_num=$pm" + echo "dsl.power_mode_s=\"$s\"" + else + echo "Power Management Mode: $s" + fi +} + +# +# Latency type (interleave delay) +# +latency_delay() { + local csg + + local idu + local idu_s; + local sidu + + local idd + local idd_s; + local sidd + + csg=$(dsl_cmd g997csg 0 1) + idd=$(dsl_val "$csg" ActualInterleaveDelay) + + csg=$(dsl_cmd g997csg 0 0) + idu=$(dsl_val "$csg" ActualInterleaveDelay) + + [ -z "$idd" ] && idd=0 + [ -z "$idu" ] && idu=0 + + if [ "$idd" > 100 ]; then + idd_s="Interleave" + else + idd_s="Fast" + fi + + if [ "$idu" > 100 ]; then + idu_s="Interleave" + else + idu_s="Fast" + fi + + sidu=$(scale_latency $idu) + sidd=$(scale_latency $idd) + + if [ "$action" = "lucistat" ]; then + echo "dsl.latency_num_down=\"$sidu\"" + echo "dsl.latency_num_up=\"$sidd\"" + echo "dsl.latency_s_down=\"$idd_s\"" + echo "dsl.latency_s_up=\"$idu_s\"" + else + echo "Latency / Interleave Delay: Down: ${idd_s} (${sidd}) / Up: ${idu_s} (${sidu})" + fi +} + +# +# Errors +# +errors() { + local lsctg + local dpctg + local ccsg + local esf + local esn + local sesf + local sesn + local lossf + local lossn + local uasf + local uasn + + local crc_pf + local crc_pn + local crcp_pf + local crcp_pn + local hecf + local hecn + + local fecn + local fecf + + lsctg=$(dsl_cmd pmlsctg 1) + esf=$(dsl_val "$lsctg" nES) + sesf=$(dsl_val "$lsctg" nSES) + lossf=$(dsl_val "$lsctg" nLOSS) + uasf=$(dsl_val "$lsctg" nUAS) + + lsctg=$(dsl_cmd pmlsctg 0) + esn=$(dsl_val "$lsctg" nES) + sesn=$(dsl_val "$lsctg" nSES) + lossn=$(dsl_val "$lsctg" nLOSS) + uasn=$(dsl_val "$lsctg" nUAS) + + dpctg=$(dsl_cmd pmdpctg 0 1) + hecf=$(dsl_val "$dpctg" nHEC) + crc_pf=$(dsl_val "$dpctg" nCRC_P) + crcp_pf=$(dsl_val "$dpctg" nCRCP_P) + + dpctg=$(dsl_cmd pmdpctg 0 0) + hecn=$(dsl_val "$dpctg" nHEC) + crc_pn=$(dsl_val "$dpctg" nCRC_P) + crcp_pn=$(dsl_val "$dpctg" nCRCP_P) + + ccsg=$(dsl_cmd pmccsg 0 1 0) + fecf=$(dsl_val "$ccsg" nFEC) + + ccsg=$(dsl_cmd pmccsg 0 0 0) + fecn=$(dsl_val "$ccsg" nFEC) + + if [ "$action" = "lucistat" ]; then + echo "dsl.errors_fec_near=$fecn" + echo "dsl.errors_fec_far=$fecf" + echo "dsl.errors_es_near=$esn" + echo "dsl.errors_es_far=$esf" + echo "dsl.errors_ses_near=$sesn" + echo "dsl.errors_ses_far=$sesf" + echo "dsl.errors_loss_near=$lossn" + echo "dsl.errors_loss_far=$lossf" + echo "dsl.errors_uas_near=$uasn" + echo "dsl.errors_uas_far=$uasf" + echo "dsl.errors_hec_near=$hecn" + echo "dsl.errors_hec_far=$hecf" + echo "dsl.errors_crc_p_near=$crc_pn" + echo "dsl.errors_crc_p_far=$crc_pf" + echo "dsl.errors_crcp_p_near=$crcp_pn" + echo "dsl.errors_crcp_p_far=$crcp_pf" + else + echo "Forward Error Correction Seconds (FECS): Near: ${fecn} / Far: ${fecf}" + echo "Errored seconds (ES): Near: ${esn} / Far: ${esf}" + echo "Severely Errored Seconds (SES): Near: ${sesn} / Far: ${sesf}" + echo "Loss of Signal Seconds (LOSS): Near: ${lossn} / Far: ${lossf}" + echo "Unavailable Seconds (UAS): Near: ${uasn} / Far: ${uasf}" + echo "Header Error Code Errors (HEC): Near: ${hecn} / Far: ${hecf}" + echo "Non Pre-emtive CRC errors (CRC_P): Near: ${crcp_pn} / Far: ${crcp_pf}" + echo "Pre-emtive CRC errors (CRCP_P): Near: ${crcp_pn} / Far: ${crcp_pf}" fi } @@ -118,11 +460,6 @@ line_uptime() { [ -z "$et" ] && et=0 - if [ "$action" = "lucistat" ]; then - echo "dsl.line_uptime=${et}" - return - fi - d=$(expr $et / 86400) etr=$(expr $et % 86400) h=$(expr $etr / 3600) @@ -137,7 +474,16 @@ line_uptime() { [ "${d}" -ne 0 ] && rc="${d}d ${rc}" [ -z "$rc" ] && rc="down" - echo "Line Uptime: ${rc}" + + + if [ "$action" = "lucistat" ]; then + echo "dsl.line_uptime=${et}" + echo "dsl.line_uptime_s=\"${rc}\"" + else + + echo "Line Uptime Seconds: ${et}" + echo "Line Uptime: ${rc}" + fi } # @@ -147,35 +493,72 @@ line_data() { local lsg local latnu local latnd + local satnu + local satnd local snru local snrd + local attndru + local attndrd + local sattndru + local sattndrd + local actatpu + local actatpd lsg=$(dsl_cmd g997lsg 1 1) latnd=$(dsl_val "$lsg" LATN) + satnd=$(dsl_val "$lsg" SATN) snrd=$(dsl_val "$lsg" SNR) + attndrd=$(dsl_val "$lsg" ATTNDR) + actatpd=$(dsl_val "$lsg" ACTATP) lsg=$(dsl_cmd g997lsg 0 1) latnu=$(dsl_val "$lsg" LATN) + satnu=$(dsl_val "$lsg" SATN) snru=$(dsl_val "$lsg" SNR) + attndru=$(dsl_val "$lsg" ATTNDR) + actatpu=$(dsl_val "$lsg" ACTATP) [ -z "$latnd" ] && latnd=0 [ -z "$latnu" ] && latnu=0 + [ -z "$satnd" ] && satnd=0 + [ -z "$satnu" ] && satnu=0 [ -z "$snrd" ] && snrd=0 [ -z "$snru" ] && snru=0 latnd=$(dbt $latnd) latnu=$(dbt $latnu) + satnd=$(dbt $satnd) + satnu=$(dbt $satnu) snrd=$(dbt $snrd) snru=$(dbt $snru) + actatpd=$(dbt $actatpd) + actatpu=$(dbt $actatpu) + + [ -z "$attndrd" ] && attndrd=0 + [ -z "$attndru" ] && attndru=0 + + sattndrd=$(scale $attndrd) + sattndru=$(scale $attndru) if [ "$action" = "lucistat" ]; then echo "dsl.line_attenuation_down=$latnd" echo "dsl.line_attenuation_up=$latnu" echo "dsl.noise_margin_down=$snrd" echo "dsl.noise_margin_up=$snru" + echo "dsl.signal_attenuation_down=$satnd" + echo "dsl.signal_attenuation_up=$satnu" + echo "dsl.actatp_down=$actatpd" + echo "dsl.actatp_up=$actatpu" + echo "dsl.max_data_rate_down=$attndrd" + echo "dsl.max_data_rate_up=$attndru" + echo "dsl.max_data_rate_down_s=\"$sattndrd\"" + echo "dsl.max_data_rate_up_s=\"$sattndru\"" else - echo "Line Attenuation: ${latnd}dB / ${latnu}dB" - echo "Noise Margin: ${snrd}dB / ${snru}dB" + echo "Line Attenuation (LATN): Down: ${latnd}dB / Up: ${latnu}dB" + echo "Signal Attenuation (SATN): Down: ${satnd}dB / Up: ${satnu}dB" + echo "Noise Margin (SNR): Down: ${snrd}dB / Up: ${snru}dB" + echo "Aggregate Transmit Power(ACTATP): Down: ${actatpd}dB / Up: ${actatpu}dB" + echo "Max. Attainable Data Rate (ATTNDR): Down: ${sattndrd}/s / Up: ${sattndru}/s" fi } @@ -226,16 +609,21 @@ line_state() { fi else if [ "$ls" = "0x801" ]; then - echo "Line State: UP [$ls: $s]" + echo "Line State: UP [$ls: $s]" else - echo "Line State: DOWN [$ls: $s]" + echo "Line State: DOWN [$ls: $s]" fi fi } status() { + vendor chipset + xtse line_state + errors + power_mode + latency_delay data_rates line_data line_uptime |