aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
diff options
context:
space:
mode:
authorSven Eckelmann <sven@narfation.org>2020-11-23 13:41:34 +0100
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commit17e592049005f3f7e65429966b21b2d834f9c2f0 (patch)
treeacc4acc061923a61d4874d66bd39055bf0d7a985 /package/boot
parent5fc28ef47959c1256f2553d507224bb481b08494 (diff)
downloadupstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.gz
upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.bz2
upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.zip
ath79: Add support for Plasma Cloud PA300E
Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * external antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
Diffstat (limited to 'package/boot')
-rw-r--r--package/boot/uboot-envtools/files/ath793
1 files changed, 2 insertions, 1 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 40fbc96a07..496a27ceb2 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -81,7 +81,8 @@ netgear,wndr4300tn|\
netgear,wndr4300sw)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
;;
-plasmacloud,pa300)
+plasmacloud,pa300|\
+plasmacloud,pa300e)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
qihoo,c301)