diff options
| author | Perry Melange <isprotejesvalkata@gmail.com> | 2019-08-07 19:25:13 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-08-07 21:17:40 +0200 |
| commit | 796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95 (patch) | |
| tree | fe459a659f69dbd28bee860efa758ce19e875a80 /target/linux/brcm63xx/patches-4.14/309-cfe_version_mod.patch | |
| parent | d7b4b5ec24184d322ccfc204c22120d5b4f02312 (diff) | |
| download | upstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.tar.gz upstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.tar.bz2 upstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.zip | |
ath79: add support for D-Link DIR-842 C3
Hardware spec of DIR-842 C3:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: circuit onboard, but components are not soldered
Flash instructions:
1. Upgrade the factory.bin through the factory web interface or
the u-boot failsafe interface.
The firmware will boot up correctly for the first time.
Do not power off the device after OpenWrt has booted.
Otherwise the u-boot will enter failsafe mode as the checksum
of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
After upgrading completes the u-boot won't complain about the
firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
just upgrade the factory.bin through the u-boot failsafe interface
and then goto step 2.
Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
Diffstat (limited to 'target/linux/brcm63xx/patches-4.14/309-cfe_version_mod.patch')
0 files changed, 0 insertions, 0 deletions