aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/files-5.4/arch/arm/boot/dts
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2021-01-03 23:34:31 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-03 15:50:55 +0100
commitcbccc2560c0240c2c9528e82d745b7f45ce88bbd (patch)
treeec5119dd9d443b7576fbc975ed2a7da2e735e937 /target/linux/ipq806x/files-5.4/arch/arm/boot/dts
parent2eb336b79d88a506098e1f8cffaefc3696a7757d (diff)
downloadupstream-cbccc2560c0240c2c9528e82d745b7f45ce88bbd.tar.gz
upstream-cbccc2560c0240c2c9528e82d745b7f45ce88bbd.tar.bz2
upstream-cbccc2560c0240c2c9528e82d745b7f45ce88bbd.zip
ipq806x: consolidate DTS files directory
Commit 29ca10e537ee ("ipq806x: remove support for kernel 4.19") moved DTS files to "files" directory, but after that a new DTS file was added to the former "files-5.4" directory. Move it to the new directory. Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ipq806x/files-5.4/arch/arm/boot/dts')
-rw-r--r--target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts242
1 files changed, 0 insertions, 242 deletions
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts
deleted file mode 100644
index 15ed5b4773..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "asrock,g10", "qcom,ipq8064";
- model = "ASRock G10";
-
- aliases {
- ethernet0 = &gmac1;
- ethernet1 = &gmac0;
-
- led-boot = &led_status_blue;
- led-failsafe = &led_status_amber;
- led-running = &led_status_blue;
- led-upgrade = &led_status_amber;
- };
-
- chosen {
- bootargs-override = "console=ttyMSM0,115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- /*
- * this is a bit misleading. Because there are about seven
- * multicolor LEDs connected all wired together in parallel.
- */
-
- status_yellow {
- label = "yellow:status";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_amber: status_amber {
- label = "amber:status";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_blue: status_blue {
- label = "blue:status";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- /*
- * LED is declared in vendors boardfile but it's not
- * working and the manual doesn't mention anything
- * about the LED being white.
-
- status_white {
- label = "white:status";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
- */
- };
-
- i2c-gpio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
- <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
- i2c-gpio,delay-us = <5>;
- i2c-gpio,scl-output-only;
-
- mcu@50 {
- reg = <0x50>;
- compatible = "sonix,sn8f25e21";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- ir-remote {
- label = "ir-remote";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps5g {
- label = "wps5g";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- wps2g {
- label = "wps2g";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4_serial {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&qcom_pinmux {
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio26";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio15", "gpio16", "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-};
-
-&rpm {
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
-
-/delete-node/ &pcie2_pins;
-/delete-node/ &pcie2;