aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ath79: add support for TP-Link TL-WA901ND v3Adrian Schmutzler2020-08-084-0/+64
| | | | | | | | | | | | | | | | | | | | | This ports support for the TL-WA901ND v3 from ar71xx to ath79. Most of the hardware is shared with the TL-WA850/860RE v1 range extenders. It completes the TL-WA901ND series in ath79. Specifications: Board: AP123 / AR9341 Flash/RAM: 4/32 MiB CPU: 535 MHz WiFi: 2.4 GHz b/g/n Ethernet: 1 port (100M) Flashing instructions: Upload the factory image via the vendor firmware upgrade option. This has not been tested on device, but port from ar71xx is straightforward and the device will be disabled by default anyway. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: replace patches with upstream versionAnsuel Smith2020-08-088-166/+218
| | | | | | | | Replace all the custom patches with the backported upstream version Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [refresh patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: drop redundant kmods-leds-gpioAdrian Schmutzler2020-08-081-7/+6
| | | | | | | The ath79 target has CONFIG_LEDS_GPIO=y set in kernel config, so no need to pull the kmod-leds-gpio module for specific devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: mt7621: implement compatibility version for DSA migrationAdrian Schmutzler2020-08-083-0/+109
| | | | | | | | | | | | | | | | | | | This implements the newly introduced compat-version to prevent broken upgrade between swconfig and DSA for ramips' mt7621 subtarget. In order to make the situation more transparent for the user, and to prevent large switch-cases for devices, it is more convenient to have the entire subtarget 1.1-by-default. This means that new devices will be added with 1.1 from the start, but in contrast we don't need to switch them in board.d files. Apart from that, users that manually backport devices to 19.07 with swconfig will have an equivalent upgrade experience to officially supported devices. Since DSA support on mt7621 is out for a while already, this applies the same uci-defaults workaround for early adopters as already done for kirkwood and mvebu in previous commits. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: improve message for incompatible image on "legacy" devicesAdrian Schmutzler2020-08-081-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been reported that the current message displayed during upgrade with compat_version change is misleading for "legacy" devices, i.e. those without the "new" fwtool. This is partially caused by the fact that we need to exploit the supported_devices string to get some message text displayed for these devices. This patch modifies the message to make it more helpful and include additional information, e.g. Device linksys,wrt3200acm not supported by this image Supported devices: linksys,wrt3200acm linksys-whateverelse - Image version mismatch: image 1.1, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Config cannot be migrated from swconfig to DSA Note that the line breaks (except the one before Supported devices) are added manually here, I hesitate to hack \n into the supported_devices as well. The "Reason:" will only be displayed if DEVICE_COMPAT_MESSAGE is set for the device, otherwise "Please check documentation ..." will be shown instead. While at it, also rearrange the code in image-commands.mk to make lines shorter and remove the double filter-out command. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: fix sysupgrade experience for early DSA-adoptersAdrian Schmutzler2020-08-081-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conceptually, the compat-version during sysupgrade is meant to describe the config. Therefore, if somebody starts with a device on 19.07 and swconfig, and that person does a forceful upgrade into a DSA-based firmware without wiping his/her config, then the local compat-version should stay at 1.0 according to the config present (and not get updated). However, this poses a problem for those people that early-adopted DSA in master, as they already have adjusted their config for DSA, but it still is "1.0" as far as sysupgrade is concerned. This can be healed by a simple uci set system.@system[0].compat_version="1.1" uci commit system But this needs to be applied _after_ the upgrade (as the "old" fwtool on the old installation does not know about compat_version) and it requires access via SSH (i.e. no pure GUI solution is available for this group of people, apart from wiping their config _again_ for no technical reason). Despite, the situation will not become obvious to those just upgrading via GUI, they will just have the experience of a "broken upgrade". This is a conflict which cannot be resolved by achieving both goals, we have to decide to either keep the strict concept or improve the situation for early adopters. In this patch, we address the issue by providing a uci-defaults script that will raise the compat_version for _all_ people upgrading into a 1.1 image, no matter whether they have reset config or not. The idea is to implement this as a _temporary_ solution, so early adopters can upgrade into the new mechanism without issues, and after a few weeks/months we could remove the uci-defaults script again. If we e.g. remove the script just before 20.xx.0-rc1, early adopters should have moved on by then, and existing stable users would still get the intended experience. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: fix sysupgrade experience for early DSA-adoptersAdrian Schmutzler2020-08-081-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conceptually, the compat-version during sysupgrade is meant to describe the config. Therefore, if somebody starts with a device on 19.07 and swconfig, and that person does a forceful upgrade into a DSA-based firmware without wiping his/her config, then the local compat-version should stay at 1.0 according to the config present (and not get updated). However, this poses a problem for those people that early-adopted DSA in master, as they already have adjusted their config for DSA, but it still is "1.0" as far as sysupgrade is concerned. This can be healed by a simple uci set system.@system[0].compat_version="1.1" uci commit system But this needs to be applied _after_ the upgrade (as the "old" fwtool on the old installation does not know about compat_version) and it requires access via SSH (i.e. no pure GUI solution is available for this group of people, apart from wiping their config _again_ for no technical reason). Despite, the situation will not become obvious to those just upgrading via GUI, they will just have the experience of a "broken upgrade". This is a conflict which cannot be resolved by achieving both goals, we have to decide to either keep the strict concept or improve the situation for early adopters. In this patch, we address the issue by providing a uci-defaults script that will raise the compat_version for _all_ people upgrading into a 1.1 image, no matter whether they have reset config or not. The idea is to implement this as a _temporary_ solution, so early adopters can upgrade into the new mechanism without issues, and after a few weeks/months we could remove the uci-defaults script again. If we e.g. remove the script just before 20.xx.0-rc1, early adopters should have moved on by then, and existing stable users would still get the intended experience. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use lzma-loader for RT5350F-OLinuXino devicesSungbo Eo2020-08-081-0/+2
| | | | | | | The bootloader fails to extract a big kernel, e.g. v5.4 kernel image with ALL_KMODS enabled. This can be fixed by using lzma-loader. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: adjust LZMA_TEXT_START for 32MB RAM devicesSungbo Eo2020-08-081-1/+1
| | | | | | | | | | Currently the lzma-loader is placed in RAM at 32MB offset, which does not make sense for devices with only 32MB RAM. If we adjust LZMA_TEXT_START to 24MB offset, then the lzma-loader can be used on those devices and still about 24MB memory will be available for uncompressed image, which should be enough for most use cases. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mac80211: exchange mesh 6GHz IE patch for upstream acceptedDavid Bauer2020-08-082-28/+64
| | | | | | | | | | Exchange the patch fixing the kernel ringbuffer WARNING flood for the one accepted upstream. Fixes commit a956c14d6aa4 ("mac80211: util: don't warn on missing sband iftype data") Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: recognize option "key" as alias for "auth_secret"Jo-Philipp Wich2020-08-072-2/+2
| | | | | | | | | | | | | | The hostapd configuration logic is supposed to accept "option key" as legacy alias for "option auth_secret". This particular fallback option failed to work though because "key" was not a registered configuration variable. Fix this issue by registering the "key" option as well, similar to the existing "server" nad "port" options. Ref: https://github.com/openwrt/openwrt/pull/3282 Suggested-by: Michael Jones <mike@meshplusplus.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: make "key" option optional if "wpa_psk_file" is providedJo-Philipp Wich2020-08-071-5/+5
| | | | | | | | | | | | | If an existing "wpa_psk_file" is passed to hostapd, the "key" option may be omitted. While we're at it, also improve the passphrase length checking to ensure that it is either exactly 64 bytes or 8 to 63 bytes. Fixes: FS#2689 Ref: https://github.com/openwrt/openwrt/pull/3283 Suggested-by: Michael Jones <mike@meshplusplus.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* exfat: add dependency on nls-baseDavid Bauer2020-08-071-0/+1
| | | | | | | | | | | | Add a dependency on kmod-nls-base for the new exfat driver. Otherwise the build fails on ramips and ath79 on kernel 5.4: Package kmod-fs-exfat is missing dependencies for the following libraries: nls_base.ko Fixes commit cd41234d2f63 ("exfat: add out of tree module") Signed-off-by: David Bauer <mail@david-bauer.net>
* om-watchdog: fix board name for teltonika,rut5xxAdrian Schmutzler2020-08-072-2/+2
| | | | | | | | | The board name is equivalent to the compatible, not the device definition. Fix it. Fixes: b4588c853838 ("kernel/om-watchdog: Apply device renames from ramips") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: switch rt288x subtarget to kernel 5.4Adrian Schmutzler2020-08-071-2/+0
| | | | | | | | | | | | | | The sbutarget has testing support for kernel 5.4 for quite a while and builds fine, however, only one devices there is > 4 MiB. Since it's unlikely to get a Tested-by for that device, and the other ralink subtargets appear to be working with 5.4 so far, let's set this target to 5.4 by default as well. That way, even if the device happens to break, we'll still have at least usable SDK and IB for people to use. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* nat46: update to latest git HEADHans Dedecker2020-08-072-37/+3
| | | | | | | | 71e9f09 nat46-core: fix compilation with kernel 5.4 Remove 100-kernel-5.4-compat patch as upstream accepted Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips/mt7620: fix portmap based on board.d port assignmentAdrian Schmutzler2020-08-079-10/+8
| | | | | | | | | | | | | | When comparing to the port assignment in board.d/02_network, many devices seem to use the wrong setup of mediatek,portmap. The corrects the values for mt7620 subtarget based on the location of the wan port. A previous cleanup of obviously wrong values has already been done in d3c0a944059b ("ramips: mt7620/mt7621: remove invalid mediatek,portmap") Cc: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* hostapd: add wpad-basic-wolfssl variantPetr Štetiar2020-08-073-1/+17
| | | | | | | | | Add package which provides size optimized wpad with support for just WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w. Signed-off-by: Petr Štetiar <ynezz@true.cz> [adapt to recent changes, add dependency for WPA_WOLFSSL config] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: invert wpad selection for mt7621Adrian Schmutzler2020-08-072-80/+89
| | | | | | | | | | | | | | | | | | | For ramips/mt7621, the wpad-basic package is not selected by default, but added for every device individually as needed. While this might be technically correct if the SoC does not come with a Wifi module, only 18 of 97 devices for that platform are set up _without_ wpad-basic currently. Therefore, it seems more convenient to add wpad-basic by default for the subtarget and then just remove it for the 18 mentioned devices, instead of having to add it for about 60 times instead. This would also match the behavior of the 5 other subtargets, where wpad-basic/wpad-mini is added by default as well, and thus be more obvious to developers without detailed SoC knowledge. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: add missing endif board comnentsÁlvaro Fernández Rojas2020-08-0761-118/+118
| | | | | | This provides better context for board patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* base-files: functions.sh: fix config_get() on invalid identifiersJo-Philipp Wich2020-08-072-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When passing a section or option value to config_get() which contains characters that happen to be valid variable interpolation expressions, the function returns a nonsensical expression result instead of the expected empty string. When the passed section or option name contains other characters which are not valid within a shell variable name, a substitution error is occuring instead. The issue can be easily reproduced by one of the following examples: root@OpenWrt:~# . /lib/functions.sh root@OpenWrt:~# config load system root@OpenWrt:~# config_get variable invalid-section option root@OpenWrt:~# echo "$variable" section_option:- root@OpenWrt:~# . /lib/functions.sh root@OpenWrt:~# config load system root@OpenWrt:~# config_get variable section invalid-option root@OpenWrt:~# echo "$variable" option:- root@OpenWrt:~# . /lib/functions.sh root@OpenWrt:~# config load system root@OpenWrt:~# config_get variable section invalid@option -ash: eval: syntax error: bad substitution Fix this issue by only performing interpolations when the given section and option arguments are free of illegal characters. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm63xx: merge RTA770BW and RTA770W board patchesÁlvaro Fernández Rojas2020-08-0738-143/+101
| | | | | | The only difference between both boards is the DSL annex. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add missing fallback SPROMsÁlvaro Fernández Rojas2020-08-0717-50/+56
| | | | | | A couple of SPROM IDs are missing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add missing OHCI nodesÁlvaro Fernández Rojas2020-08-0733-99/+102
| | | | | | All boards with EHCI enabled should also have OHCI enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: remove invalid EHCI nodesÁlvaro Fernández Rojas2020-08-0760-160/+158
| | | | | | There's no EHCI controller on BCM6348. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: refactor board patchesÁlvaro Fernández Rojas2020-08-0769-1483/+1401
| | | | | | | Current board patches format is crazy. Let's try to put some order. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* dnsmasq: abort when dnssec requested but not availableYousong Zhou2020-08-072-3/+7
| | | | | | | | | | | | | | | | | | | | | | Before this commit, if uci option "dnssec" was set, we pass "--dnssec" and friends to dnsmasq, let it start and decide whether to quit and whether to emit message for diagnosis # dnsmasq --dnssec; echo $? dnsmasq: DNSSEC not available: set HAVE_DNSSEC in src/config.h 1 DNSSEC as a feature is different from others like dhcp, tftp in that it's a security feature. Better be explicit. With this change committed, we make it so by not allowing it in the first in the initscript, should dnsmasq later decides to not quit (not likely) or quit without above explicit error (unlikely but less so ;) So this is just being proactive. on/off choices with uci option "dnssec" are still available like before Link: https://github.com/openwrt/openwrt/pull/3265#issuecomment-667795302 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* tools/firmware-utils: use UTC for image timestampsSander Vanheule2020-08-073-3/+3
| | | | | | | | By using localtime() to determine the timestamp that goes into factory images, the resulting image depends on the timezone of the build system. Use gmtime() instead, which results in more reproducible images. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ramips: switch rt3883 subtarget to kernel 5.4Adrian Schmutzler2020-08-061-2/+0
| | | | | | | | | | | | The target has testing support for kernel 5.4 for quite a while, compiles fine for all devices, and has been run-tested on Asus RT-N56U successfully. Let's set it to kernel 5.4 by default to increase the audience before an 20.xx stable branch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com> [Asus RT-N56U]
* bcm63xx: switch to upstream CFE version detection patchÁlvaro Fernández Rojas2020-08-067-32/+61
| | | | | | The patch improving CFE version detection has been merged (linux 5.9). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to upstream endif comments patchÁlvaro Fernández Rojas2020-08-0686-354/+451
| | | | | | | This allows better context for board patches and we no longer need a downstream patch for that. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: switch to upstream LED patchÁlvaro Fernández Rojas2020-08-061-44/+95
| | | | | | | The patch adding support for the second LED HW blinking interval has been merged (linux 5.9). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Revert "dsaconfig: introduce package for UCI configuration of VLAN filter rules"Jo-Philipp Wich2020-08-064-364/+0
| | | | | | | | This reverts commit 96b87196b0788d4cdaa81a49a65d198d9f6c90d2. This commit was not meant to go into master. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "add vfconfig"Jo-Philipp Wich2020-08-064-292/+0
| | | | | | | | This reverts commit 34553e8cc9ad4530d3f52c3423e5c52fdacac539. This commit was not meant to go into master. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to git HEADDaniel Golle2020-08-061-3/+3
| | | | | | | | | | | | | 47a9f0d service: add method to query available container features afbaba9 initd: attempt to mount cgroup2 ead60fe jail: use pidns semantics also for timens 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits 83053b6 instance: add instances into unified cgroup hierarchy 16159bb jail: parse OCI cgroups resources 282ff0c jail: only free cgroups if they were allocated ab55357 jail: fix freeing cgroups avl Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "procd: update to git HEAD"Daniel Golle2020-08-063-19/+19
| | | | | | This reverts commit e0e607f0d000e62c6af8d822d7c3f57c2a582136. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79/nand: add support for Netgear WNDR4300TNDavy Hollevoet2020-08-0611-40/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the WNDR4300TN, marketed by Belgian ISP Telenet. The hardware is the same as the WNDR4300 v1, without the fifth ethernet port (WAN) and the USB port. The circuit board has the traces, but the components are missing. Specifications: * SoC: Atheros AR9344 * RAM: 128 MB * Flash: 128 MB NAND flash * WiFi: Atheros AR9580 (5 GHz) and AR9344 (2.4 GHz) * Ethernet: 4x 1000Base-T * LED: Power, LAN, WiFi 2.4GHz, WiFi 5GHz, WPS * UART: on board, to the right of the RF shield at the top of the board Installation: * Flashing through the OEM web interface: + Connect your computer to the router with an ethernet cable and browse to http://192.168.0.51/ + Log in with the default credentials are admin:password + Browse to Advanced > Administration > Firmware Upgrade in the Telenet interface + Upload the Openwrt firmware: openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img + Proceed with the firmware installation and give the device a few minutes to finish and reboot. * Flashing through TFTP: + Configure your wired client with a static IP in the 192.168.1.x range, e.g. 192.168.1.10 and netmask 255.255.255.0. + Power off the router. + Press and hold the RESET button (the factory reset button on the bottom of the device, with the gray circle around it, next to the Telenet logo) and turn the router on while keeping the button pressed. + The power LED will start flashing orange. You can release the button once it switches to flashing green. + Transfer the image over TFTP: $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img Signed-off-by: Davy Hollevoet <github@natox.be> [use DT label reference for adding LEDs in DTSI files] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for Netgear JWNR2010 v5Shibajee Roy2020-08-065-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: MediaTek MT7620N (580 MHz) - Flash size: 4 MB NOR SPI - RAM size: 32 MB DDR1 - Bootloader: U-Boot - Wireless: MT7620N 2x2 MIMO 802.11b/g/n (2.4 GHz) - Switch: MT7620 built-in 10/100 switch with vlan support - Ports: 4x LAN, 1x WAN - Others: 7x LED, Reset button, UART header on PCB (57600 8N1) Flash instructions: 1. Use ethernet cable to connect router with PC/Laptop, any router LAN port will work. 2. To flash openwrt we are using nmrpflash[1]. 3. Flash commands: First we need to identify the correct Ethernet id. nmrpflash -L nmrpflash -i net* -f openwrt-ramips-mt7620-netgear_jwnr2010-v5-squashfs-factory.img This will show something like "Advertising NMRP server on net*..." (net*, *=1,2,3... etc.) 4. Now remove the power cable from router back side and immediately connect it again. You will see flash notification in CMD window, once it says reboot the device just plug off the router and plug in again. Revert to stock: 1. Download the stock firmware from official netgear support[2]. 2. Follow the same nmrpflash procedure like above, this time just use the stock firmware. nmrpflash -i net* -f N300-V1.1.0.54_1.0.1.img MAC addresses on stock firmware: LAN = *:28 (label) WAN = *:29 WLAN = *:28 On flash, the only valid MAC address is found in factory 0x4. Special Note: This openwrt firmware will also support other netgear N300 routers like below as they share same stock firmware[3]. JNR1010v2 / WNR614 / WNR618 / JWNR2000v5 / WNR2020 / WNR1000v4 / WNR2020v2 / WNR2050 [1] https://github.com/jclehner/nmrpflash [2] https://www.netgear.com/support/product/JWNR2010v5.aspx [3] http://kb.netgear.com/000059663 Signed-off-by: Shibajee Roy <ador250@protonmail.com> [create DTSI, use netgear_sercomm_nor, disable by default, add MAC addresses to commit message, add label MAC address] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: drop remaining m25p,chunked-io from DTSAdrian Schmutzler2020-08-063-3/+0
| | | | | | | | | | | | | | This option was a spi nor hack which is dropped in commit bcf4a5f474d1 ("ramips: remove chunked-io patch and set spi->max_transfer_size instead") Most of it has already been removed in be2b61e4f1ec ("ramips: drop m25p,chunked-io from dts") It seems all current usages were added after that. Remove them. Cc: Chuanhong Guo <gch981213@gmail.com> Reported-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add common definition netgear_sercomm_norAdrian Schmutzler2020-08-063-27/+24
| | | | | | | | Like NAND-based devices, SPI-NOR based Netgear devices also share a common setup for their images. This creates a common defition for them in image/Makefile, so it can be reused across subtargets. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: update to git HEADDaniel Golle2020-08-063-19/+19
| | | | | | | | | | | 47a9f0d service: add method to query available container features afbaba9 initd: attempt to mount cgroup2 ead60fe jail: use pidns semantics also for timens 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits 83053b6 instance: add instances into unified cgroup hierarchy 16159bb jail: parse OCI cgroups resources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: update to git HEADDaniel Golle2020-08-061-3/+3
| | | | | | 9e52171 blobmsg: introduce BLOBMSG_CAST_INT64 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* glibc: update to latest 2.31 commit [BZ #19519 BZ #26332 BZ #26248]Hans Dedecker2020-08-061-2/+2
| | | | | | | | | | 6fdf971c9d Add NEWS entry for CVE-2016-10228 (bug 19519) 70d585151c Rewrite iconv option parsing [BZ #19519] 1c8efe848b powerpc: Fix incorrect cache line size load in memset (bug 26332) 7611339a9b nptl: Zero-extend arguments to SETXID syscalls [BZ #26248] 21b760cc2f Disable warnings due to deprecated libselinux symbols used by nss and nscd Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: tidy up MAC address setup for Linkit Smart and Omega2Adrian Schmutzler2020-08-063-8/+2
| | | | | | | | | | | | | | | | | | | | Linkit Smart 7688 and Onion Omega 2(+) are one-port devices, and have their port set to LAN by default. Setting up a WAN MAC address for them doesn't make any sense, as no wan interface will be created in uci config. Despite, these devices also set lan_mac in 02_network, although mtd-mac-address sets a different address for the ethernet interface in DTS. Clean this up by moving the lan_mac value into DTS and dropping the entries in 02_network completely. That way, the effective address on the LAN interface should stay the same, but we get rid of the extra (re)assignments. As I don't have access to the devices, this does not tell anything about whether 0x2e is actually a good choice, it just preserves the existing assignment. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: WizFi630S use macs from factory partionTobias Welz2020-08-062-3/+6
| | | | | | | | | | | | | | | | | | | | WIZnet WizFi630s has three mac addresses in the factory partition: 0x04 (also on the label), 0x28 for wan mac and 0x2e as lan mac. All three macadresses are sequential series of addresses. This is making use of them. While at it, also add the label MAC address to 02_network. MAC addresses as verified by OEM firmware: use interface source WLAN ra0 factory 0x04 (label) WAN eth0.2 factory 0x28 (label + 1) LAN eth0.1 factory 0x2e (label + 2) Signed-off-by: Tobias Welz <tw@wiznet.eu> [fix sorting in 02_network, commit message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: correct WizFi630S pin mappingsTobias Welz2020-08-061-26/+8
| | | | | | | | | | WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu>
* build: set up host command for egrepFelix Fietkau2020-08-061-0/+4
| | | | | | It is used for the kernel build and uses GNU specific features Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: refresh kernel 5.4 configAdrian Schmutzler2020-08-061-11/+3
| | | | | | | | | | | Refresh config with make kernel_oldconfig. After d1a8217d87bf ("kernel: clean-up build-configurable kernel config symbols"), the routine wants to add an additional CONFIG_CGROUPS (=n), which has been removed manually again, as this seems unintended. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: merge performance improvement patchesFelix Fietkau2020-08-063-0/+260
| | | | | | | Fix fq_codel performance issues Add a new rx function for batch processing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fix mt7622-rfb1 board supportFelix Fietkau2020-08-066-60/+67
| | | | | | | Make GPIO keys active-low. Add DSA support Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 13:37:36 +0000