aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mt76
Commit message (Collapse)AuthorAgeFilesLines
...
* mt76: update to the latest versionFelix Fietkau2018-10-181-3/+3
| | | | | | | | | | | b51337a mt76: clean up unused leftover EXPORT_SYMBOLs 383b228 mt76x0: reduce duplication in setting rf bandwidth parameters a1a4528 mt76: mt76x0: handle chip specific initval differences f473340 mt76: usb: fix static tracepoints 3a975b4 mt76x0: antenna select corrections 37c1150 mt76x0: init: simplify mt76x0_init_mac_registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, add mt76x0 firmware, enable mt76x0eFelix Fietkau2018-10-161-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 96fa353 mt76: do not store aggregation sequence number for null-data frames c50dca8 mt76x0: print BBP version only for debug ddc9e05 mt76x0: correct RF access via RF_CSR register. 02d2385 mt76: allow to identify bus c438e67 mt76x0: correct RF reg pairs write for PCIe c83abb8 mt76x0: use bus helper to identify rf access method 9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr} 1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c 214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c 29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c 08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c 48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c 06276cc mt76x0: pci: report firmware version using ethtool 72546ed mt76x0: pci: add missing mac80211 callbacks 4de98cd mt76: disable ldpc coding for mt76x0 devices f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device 4f3685e mt76: reserve enough room for USB tx skbs 5e6907f mt76x0: remove dma.h acfc5a9 mt76x0: pci: fix set external PA I/O current 2b79bb7 mt76: mt76x0e: another fix for the external PA current setting 8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params 1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module 3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate 7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine a514b75 mt76x0: phy: update set_channel for mt76x0e devices 62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine a48481d mt76x0: phy: add phy/vco temperature compensation cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c 2715e7c mt76: introduce mt76x02_init_agc_gain routine 87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one 98f8ef7 mt76x0: phy: do not run calibration during channel switch cf859ad mt76x2: align mt76x2 and mt76x2u firmware 1f3f767 mt76x2u: align channel gain logic to mt76x2 one d1c1454 treewide: Replace more open-coded allocation size multiplications bcbecd2 mt76x0: phy: use proper name convention b6694e6 mt76x0: phy: simplify rf configuration routines da129c9 mt76x0: phy: improve code readability in initvals_phy.h eab7ab1 mt76x0: pci: add get_survey support 9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module 4f3b608 mt76x0: use shared debugfs implementation 6aae25b mt76x0: use mt76x02_mac_work as stats handler b228a45 mt76x2u: introduce mac workqueue support 4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e 5ed28f3 mt76x0: do not perform MCU calibration for MT7630 9b844da add mt7610e firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2uFelix Fietkau2018-10-141-1/+7
| | | | | | USB and PCIe devices can run the same firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix typo in kmod-mt76x0u package descriptionFelix Fietkau2018-10-091-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix dependenciesFelix Fietkau2018-10-061-1/+2
| | | | | | | - make kmod-mt76-core hidden - select kmod-mt76-core and kmod-usb-core from mt76-usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-10-061-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 053de5c mt76x0: pci: add mt76x0e_cleanup routine c6b1926 mt76x2: move mt76x2 source files to mt76x2 folder 6afb1b8 mt76: fix header guard macro define names 05c7f24 mt76: fix frag length allocation for usb 6856ef6 mt76: usb: fix hw initialization sequence 3d43146 mt76x0: usb: stop cal/mac workqueues at hw stop bef08cc mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.c cd42111 mt76: add get_tx_txpwr_adj function pointer to mt76_driver_ops c49a3ae mt76: move mt76x02_mac_write_txwi in mt76x02-lib module 4bae980 mt76: usb: use mt76x02u_tx_prepare_skb to fill txwi e0847b4 mt76x0: init: remove unnecessary configurations e802b5c mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c 2742847 mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.h c26f9fd mt76x0: mac: use sta ewma estimation for rssi tracking 330fbe3 mt76x0: remove unused variable in mt76x0_dev a56efc5 mt76x0: remove hw_atomic_mutex mutex in mt76x0_dev abd1daa mt76x2: move mt76x2_dev in mt76x02_util.h d5d1e59 mt76x0: merge mt76x0_dev in mt76x02_dev e236ba5 mt76: move mt76x02_mac_process_rx in mt76x02-lib module 724d547 mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers ec3d829 mt76: move mt76x02_tx in mt76x02-lib module 159f767 mt76: move txrx shared routines in mt76x02_txrx.c 9c874cd mt76: rename mt76x02_util.h in mt76x02.h fd9174f mt76x2: remove leftover function declatarions 608708a mt76: move tpc routines in mt76x02-lib module 45b8f5e mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.c 9a39521 mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.c 3770c54 mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle 9730290 mt76: move mt76x02_tx_complete in mt76x02-lib module 99e0486 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.c 3d2cfe3 mt76: move tx_tasklet management in mt76x02-lib moudle e61671e mt76: move irq handler in mt76x02-lib moudle d533f13 mt76x0: pci: report firmware version using ethtool Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes mt76x2 beacon issueFelix Fietkau2018-10-011-3/+3
| | | | | | 94d4445 mt76: mt76x2: fix multi-interface beacon configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to latest, adds mt76x0u and mt76x2u support, fixes a mt7603 ↵Felix Fietkau2018-09-291-5/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powersave issue d220f43 Revert "mt76x2: reset HW before probe" 0853d79 Revert "mt76x2: add functions for setting extended MAC address registers" 8ba17b1 Revert "mt76: use a per rx queue page fragment cache" 3f0ac35 mt76x2: init: disable APCLI by default 38014de mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate() fbf4791 mt76x2: fix TXD_INFO bitmask definition d00c616 mt76x2: fix mrr idx/count estimation in mt76x2_mac_fill_tx_status() 0d42d22 mt76: introduce mt76_{incr,decr} utility routines 0f6379a mt76x2: dfs: add sw event ring buffer df8071f mt76x2: dfs: add sw pattern detector 016df9c mt76x2: debugfs: add sw pulse statistics to dfs debugfs a6915cb mt76: move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in dma.h 911e6aa mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h c55d29b mt76x2: move utility routines in mt76x2.h d08ea82 mt76x2: introduce mt76x2_init_device routine 6a1e809 mt76x2: move interface_modes definition in mt76x2_init 5aa0972 mt76x2: introduce mt76x2_mac_load_tx_status routine 730b86c mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures 1ab6cea mt76x2: add buffer len to mt76x2_mac_write_txwi signature 7ac6dac mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skb 66f3949 mt76: introduce tx_queue_skb function pointer in mt76_bus_ops d099694 mt76: introduce mt76x2-common module 9bf1aa1 mt76: add mt76x2_tx_common to mt76x2-common module 29f960a mt76: add mt76x2_mac_common to mt76x2-common module 8f568ce mt76: add mt76x2_init_common to mt76x2-common module 61c4c61 mt76: add mt76x2_common to mt76x2-common module 264edbe mt76: add mt76x2_phy_common to mt76x2-common module 7625508 mt76: move mt76x2_debugfs in mt76-common module 99a3afa mt76: add usb support to mt76 layer 25b4598 mt76: add driver code for MT76x2u based devices 253c443 mt76x0: core files 6ed7bc2 mt76x0: mac files a2c1068 mt76x0: usb files c332481 mt76x0: mcu files 0d7d9ed mt76x0: phy files 5d50834 mt76x0: init files c633654 mt76x0: eeprom files 18a9d4e mt76x0: trace and debugfs files 7395bba mt76x0: dma and tx files 08dec4c mt76x0: main file 5892efd mt76: add more states e176af8 mt76: Kconfig and Makefile for mt76x0 driver 5c38d48 mt76x0: disable HW before probe 2f37f60 mt76x0: load firmware from mediatek subdir 1388140 mt76x0: rename mt76_* functions 1cb65d5 mt76x0: rename trace symbols 4fe2b16 mt76x0: correct type for eeprom gain value 560b643 mt76x0: perform mt76x0_mac_set_ampdu_factor d1645aa mt76x0: Remove VLA usage f8a0da4 mt76: Fix comparisons with invalid hardware key index 884eca5 mt76: unify wait_for_mac fc636f0 mt76: rename mt76x2_regs.h 493feb9 mt76: merge mt76x0/regs.h into mt76x02_regs.h a238099 mt76: create new mt76x02-lib module for common mt76x{0,2} code 55bceee mt76: unify mac_get_key_info f6c19cf mt76: add helpers for register access with mt76_dev struct 34a95b8 mt76: unify mac_shared_key_setup 4286255 mt76: unify mt76x02_mac_wcid_set_key 732535e mt76: unify mac_wcid_setup 51b74ac mt76: use mac_wcid_set_drop in mt76x0 1b4a98f mt76x0: use mt76_wcid_free in mt76x0 fcf2130 mt76: unify mt76x02_vif struct 1f35eb5 mt76: unify sta structure part 1 086ea9f mt76: unify sta structure part 2 caff9a2 mt76x0: initalize custom tx queues 7362da7 mt76x0: use mt76x02_sta and mt76x02_tx_status 3a03aa1 mt76: move mt76_reg_pair definition in mt76.h a853831 mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines a80564f mt76: move mt76x2u_mcu_deinit routine in mt76-usb module ac92496 mt76: add multiple regs read support to usb_mcu layer 8b0e08f mt76x0: use mt76u_init for bus initialization ef32115 mt76x0: remove mt76x0_vendor_reset routine 949858f mt76x0: remove mt76x0_vendor_single_wr routine 21ecb9b mt76x0: remove mt76x0_mcu_msg_alloc routine 4cfeebb mt76x0: use shared mt76 usb mcu completion 2600712 mt76x0: remove mt76x0_complete_urb routine 0bd0fe8 mt76x0: remove mt76x0_vendor_request routine f88bde2 mt76x0: remove unused mt76x0_wait_asic_ready routine 7eca333 mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds 8fedb79 mt76x0: remove unused mt76x0_mcu structure e8fe4f3 mt76x0: use mt76u_mcu_fw_send_data for fw uploading b9c46a8 mt76x0: remove unused routines for usb_buff alloc/free ed3366d mt76: Enable NL80211_EXT_FEATURE_CQM_RSSI_LIST 9867146 mt76: verify evt type in usb mcu response 82a8c8a mt76: move wcid fields to common mt76_dev struct f409c6b mt76: unify sta_add / sta_remove d972ddd mt76: pratially unify add_interface f8f5788 mt76x0: fix wrong usage of wcid_mask in remove_interface 380f89c mt76: unify ampdu_action 8c7098e mt76: unify set_key 2a20cfc mt76x0: remove empty sta_notify a690333 mt76: unify AC to hw queue mapping 4453308 mt76: unify conf_tx d9352cb mt76x0: remove vif_mask 196720e mt76: unify remove_interface 57c3e89 mt76: unify add_interface 91fce2f mt76: unify sta_rate_tbl_update and related helpers 3977f48 mt76: unify txwi and rxwi structures 41e0403 mt76: unify load_tx_status 4674502 mt76: unify send_tx_status and related helpers 02816b0 mt76: use mt76_rx_status in mt76x0 0a17b1e mt76: unify mac_process_rate 8aac175 mt76x0: reserve enough space in mac80211 81a655a mt76: unify {insert/remove}_hdr_pad d8f7d2e mt76: partially unify filling txwi fields 3533718 mt76x2: change mt76x2_tx_complete routine signature 469aeb1 mt76: move mt76x2_tx_complete routine in mt76x02-lib module 87f138b mt76: move mt76x2u_remove_dma_hdr in mt76x02-lib module c87a7e8 mt76: move mt76x2u_tx_complete_skb in mt76x02-lib moudule b85e072 mt76: move mt76_qsel definition in dma.h 53b3c5a mt76: move mt76x2u_set_txinfo in mt76x02-lib module 34cec25 mt76x0: introduce mt76x0_tx_prepare_skb routine 6c5ac15 mt76: move mt76x2u_tx_status_data in mt76x02-lib module 0ba8261 mt76x0: init mt76_driver_ops callbacks 2615090 mt76x0: use mt76_alloc_device for device allocation 3c40eaf mt76x0: disable usb rx bulk aggregation 746edd7 mt76x0: mark device as running in mt76x0_start dd77785 mt76x0: simplify mt76_mac_process_rx signature 3739601 mt76x0: add mt76x0_queue_rx_skb routine 062aaa8 mt76x0: unify tx/rx datapath with mt76x2u driver 85f171f mt76x0: stop stat workqueue at hw stop 8c68115 mt76x0: set max fragments size ac02f5c mt76x0: remove unused dma.c source file 964df72 mt76x0: remove unused stat work_queue afb34b8 mt76x0: remove unused {tx/rx}_queue definitions a4fd791 mt76x0: remove unused mt76x0_tx_status routine 0e92ff6 mt76x0: remove unused endpoint definitions 8340e19 mt76x0: remove unused stat_work bfbbf05 mt76x0: enable per-sta tx queueing a8fcaa3 mt76x0: init hw capabilities 6a9b73c mt76x0: trim rx skb to proper length aa0c279 mt76: remove unused MT76_MORE_STATS state 873d792 mt76x0: remove mt76x0_stop_hardware routine 246a216 mt76: move mt76 rate definitions in mt76x02-lib module aae3fb8 mt76x0: alloc mcu buffers first in mt76x0_mcu_cmd_init 3c693a1 mt76x0: fix memory leak during hw probe 98faee1 mt76x0: move stop related routines in mt76x0_mac_stop d07c02a mt76x0: move mt76x0_init_hardware in mt76x0_register_device 12c01f4 mt76x0: do not free/alloc buffers during suspend/resume 297cc34 mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params 2d77a9a mt76x0: use mt76_register_device for device registration bb57912 mt76x0: inital split between pci and usb 3e241f3 mt76x0: remove unused mt76x0_wcid a8c61c2 mt76x0: remove some usb specific code from mt76x0_register_device e4a7387 mt76x0: make device allocation bus neutral 6da4642 mt76x0: run vco calibration for each channel configuration 1ac35da mt76: move mt76x0 and mt76x2 mcu shared defs in mt76x02_mcu.h 4d43674 mt76: add mt76_mcu_ops data structure for mcu related pointers 479b153 mt76: add usb implementation of {wr,rd}_rp e525b01 mt76: add rd_rp and wr_rp to bus_ops/mcu_ops f5590b0 mt76: usb: use common helpers for mcu_alloc_msg()/mcu_send_msg() d2773ce mt76: usb: move mt76x02 mcu code in mt76x02-usb module 6337ffb mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.c 5a79f17 mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h 88ece32 mt76x02: add static qualifier to mt76x02_remove_dma_hdr d63b72f mt76x0: remove unused mt76x0_burst_read_regs 0aef244 mt76x0: remove mt76x0_burst_write_regs() 14aaf87 mt76: usb: remove skb check in mt76x{0,2}u mcu routines 46ba81c mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_tx_queue_mcu dbc4442 mt76x2: remove leftover mt76u_buf data structure in mt76x2_mcu 26909cd mt76: introduce mmio data structure in mt76_dev 425e7e0 mt76: move __iomem regs in mt76_mmio 28cfe61 mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_mcu_msg_send a1e27de mt76x2: use common helpers for mcu_alloc_msg()/mcu_send_msg() 90b1eac mt76: unify firmware header between mt76x0 and mt76x2 a0cbd4b mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.c a633c61 mt76x2: move mt76x2 mcu shared code in mt76x2_mcu_common.c ce91108 mt76: move shared mcu_calibrate routine in mt76x02-lib module 2b3b4df mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common module 39a380a mt76: use a per rx queue page fragment cache b4a2141 mt76x2u: run device cleanup routine if resume fails df11092 treewide: Use struct_size() for kmalloc()-family 788becd treewide: devm_kzalloc() -> devm_kcalloc() 971005a mt76x2u: Add support for Alfa AWUS036ACM 878b0bd mt76: fix debugfs_simple_attr.cocci warnings 44ed12d wireless: Use octal not symbolic permissions a6f80ef build: make building 76x2e and 7603e optional 1047913 mt76x0: usb: move firmware loading to usb.c 26b20f8 mt76x0: remove mcu source file 44145f3 mt76x0: remove unused usb header file d56be99 mt76x0: usb: remove mt76_fw definition 3733445 mt76x2: fix tx power configuration for VHT mcs 9 0aced80 mt76x0: pci: add mt7650 PCI ID 35e88c0 mt76x0: pci: add fw uploading routine 3991afa mt76: move seq_put_array in mt76-core module 6cf6fba mt76: add stbc entries to mt76_rate_power 4451f99 mt76: move common eeprom definitions in mt76x02-lib module c9100cb mt76: move eeprom utility routines in mt76x02_eeprom.h 611b8c7 mt76: move mt76x2_eeprom_get in mt76x02_eeprom.h b59ed56 mt76: move mt76x02_mac_setaddr in mt76x02-lib module 844daeb mt76: move mt76x2_get_efuse_data in mt76x02-lib module 7556cb9 mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c 19d7853 mt76x0: remove mt76x0_set_country_reg routine ba7a3da mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines 35b0a2a mt76x0: unify lna_gain parsing 2a470db mt76x0: unify rssi_offset parsing fe89537 mt76x0: unify temperature offset parsing 76bc22f mt76x0: unify freq offset parsing bedeb3d mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib module 1adcd39 mt76x0: unify parse hw capabilities df23620 mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.h ebca136 mt76: usb: remove WARN_ON in mt76u_get_rx_entry_len cf8f750 mt76: fix return value of mt76x02_wait_for_mac f802bd5 mt76: move mt76_rate_power in mt76_dev 4b6093c mt76: add mt76x02_phy_set_txpower utility routine c206b8c mt76: move rate_txpower handler in mt76 debugfs 4da6fd3 mt76: move mt76x02_rate_power_val in mt76x02-lib module fb3806d mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_mac 730db56 mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate 212fa2c mt76x0: remove eeprom dependency from mt76x0_get_power_info 280e452 mt76x0: use shared debugfs implementation 21fddc3 mt76x0: phy: introduce mt76x0_phy_set_txpower routine b0d85d4 mt76: include linux/module.h in files using MODULE_* a47083b mt76: report firmware version using ethtool dc66f7c mt76: usb: make rx page_frag_cache access atomic 09d696b mt76: use skb_pad() instead of __skb_pad() e8d7890 mt76x0: add quirk to disable 2.4GHz band for Archer T1U e76fe15 mt76x2: disable WLAN core before probe 41c552f mt76x0: work around cflags issue in compat layer for trace.h b95bc8a mt76x0: use mt76_poll in mt76x0_set_wlan_state 3a3554a mt76: move wait_for_wpdma in mt76x02_dma.h 0527feb mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routines a8fda4b mt76: move mt76x02_set_irq_mask in mt76x02_mmio.c 11e3028 mt76: move queue initialization in mt76x02_mmio.c 5a29094 mt76: move mt76x02_beacon_offset in mt76x02_util.c 5f1d0ff mt76: mmio: add implementation of wr_rp and rd_rp 47eee35 mt76: move mt76x2_wait_for_bbp in mt76x02-lib module 7cc4be7 mt76x0: update initvals to latest version of vendor driver e1a2179 mt76x0: pci: move mcu code in pci_mcu.c 886f6fc mt76x0: usb: move mcu code in usb_mcu.c c7b28f4 mt76x0: use mt76x02 utility routines in mt76x0 init code 005d40a mt76x0: init: remove duplicated initialization 94776fe mt76x0: init: remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbp 5bb8339 mt76x0: init rx filter in mt76x0_init_hardware fe1379a mt76: add mt76x02_mac_start routine da982d3 mt76x0: usb: move initialization code in usb.c 22be43e mt76x0: pci: add hw initialization at bootstrap 15a50e1 mt76x0: phy: set antenna parameter according to wireless band 5d2a331 mt76: move set_{tx,rx}_path routines in mt76x02-lib module 8050d71 mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature c240904 mt76x0: pci: add mt76x0e_{start/stop} callbacks b50f38a mt76x0: eeprom: load eeprom data from mtd by default fb5bae0 mt76x0: usb: move mt76x0u_tx_prepare_skb in usb.c 4047e1f move mt7603 source files to mt7603/ 14f70f4 mt7603: fix wcid for frames sent via drv_tx 542f17e mt76: fix handling ps-poll frames 7464cc9 mt76: check aggregation sequence number for frames sent via drv_tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix tx power issue for mt76x2Felix Fietkau2018-09-221-3/+3
| | | | | | 6e1898d mt76x2: fix tx power configuration for VHT mcs 9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-08-241-3/+3
| | | | | | | | 7daf962 mt7603: add survey support 980c606 mt7603: add fix for CCA signal configuration 30b8371 mt7603: fix BAR rate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-07-131-3/+3
| | | | | | | | | 08719b1 mt76: use a per rx queue page fragment cache 4d2c565 mt76x2: reset HW before probe f622975 mt76x2: fix CCK protection control frame rate 6780375 mt76x2: add frame protection support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-06-211-3/+3
| | | | | | 1d4ca10 mt76x2: track rssi for gain adjustment per station Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-06-181-3/+3
| | | | | | | 072fdac mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation f450659 mt76x2: improve gain adjustment in noisy environments Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-06-151-3/+3
| | | | | | | | | | | | 9090f9c mt76x2: fix threshold for gain adjustment 2cbaa57 mt76x2: fix swapped values for RXO-18 in gain control a39ab70 mt76x2: adjust AGC control register 26 based on gain for VHT80 4936c0c mt76x2: clear false CCA counters after changing gain settings 1528fe7 mt76x2: fix variable gain adjustment range f3522e1 mt76x2: add a debugfs file to dump agc calibration information 65e161b mt76x2: fix tracking rssi for dynamic gain adjustment Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-06-051-3/+3
| | | | | | | | | | | | | | | 20c0766 mt7603: adjust rx hang watchdog for MT7628 664e321 mt7603: add extra PSE hang check signature for MT7628 f24b56f update MT7628 firmware to the latest version d87e4b0 mt7603: clear PSE reset bit if PSE reset fails 0ef26ef mt76: only stop tx queues on offchannel, not during the entire scan f399da3 mt76: prevent tx scheduling during channel change 21c1e1e mt76: move ieee80211_hw allocation to common core 730c292 mt76: wait for pending tx to complete before switching channel fcbb49e mt76x2: use udelay instead of usleep_range in mt76x2_mac_stop 792dbe0 mt7603: do not hold dev->mutex while flushing dev->mac_work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-05-181-3/+3
| | | | | | | 73edb22 mt76: discard early received packets if not running yet 0b8d1dd mt76: fix beacon timer drift Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-05-151-3/+3
| | | | | | | | | b2ecc52 mt76x2: fix avg_rssi estimation fd58b28 mt76x2: add a polling delay in mt76x2_mac_stop routine a78673d mt76: fix sending encrypted broadcast packets for secondary interfaces e87f925 mt76x2: apply coverage class on slot time too Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-04-181-3/+3
| | | | | | | | ec8435e mt76: initialize rx lock earlier e08d5da mt76x2: fix is_mt7612 routine e2eedc9 mt7603: retry PSE reset calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-04-171-3/+3
| | | | | | | | | ea6dd6f mt7603: add missing spin lock init 2d08440 mt76: add rcu locking around tx scheduling 8c92c91 mt7603: turn vif wcid entry back into a full mt7603_sta ca5cc9a mt76: fix concurrent rx calls on A-MPDU release Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-04-151-3/+3
| | | | | | | | | | | | | | | 1d23142 mt76: add led active low to debugfs 549f43b mt7603: ensure that the ACK flag is set for A-MPDUs with any acked subframe df9f9f6 mt7603: always try tx rate1 first 9c52f36 mt7603: pull the final rate index from the status descriptor f36f308 mt7603: improve validation of rx frames 9a23989 mt7603: remove warning on rx with invalid channel info 7a31731 mt76: check for pending reset before attempting to schedule tx 873a7c9 mt7603: call mt76_txq_schedule_all as a barrier to prevent tx during reset d9e5da3 mt76: add rcu locking in tid reorder function a8e8921 mt7603: add more checks to avoid dereferencing invalid pointers in wcid lookup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-04-091-3/+3
| | | | | | | | | | | | | | | | | | | c66094e mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx() 249fa2d mt76x2: fix warning in ieee80211_get_key_rx_seq() 54d6710 mt76: use mt76_poll_msec routine in mt76pci_load_firmware() eb359f1 mt76x2: remove unnecessary len variable in mt76x2_eeprom_load() 7e6e00b mt76: initialize available_antennas_{tx,rx} info 6469dca mt76: add mt76_init_stream_cap routine ced433d mt76x2: add mac80211 {set,get}_antenna callbacks 238f3f1 mt76x2: remove warnings in mt76x2_mac_write_txwi() 880611b mt7603: main: fix warning in ieee80211_get_key_rx_seq() bc35af8 mt76x2: fix tssi initialization for 5GHz band 700ed20 mt76x2: make mt76x2_mac_reset routine static 6e7d5ce mt76x2: remove unnecessary MT_TX_ALC_CFG_4 configuration 5153ece mt76x2: set default values in TX_ALC_CFG_{1,2} for tempetaure compensation a3e7740 mt76x2: fix tx_alc_enabled check Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-03-041-3/+3
| | | | | | | cda627f mt76: add missing VHT maximum A-MPDU length capability ffa2069 mt76: fix potential sleep in atomic context Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, improves performance and fixes tx power ↵Felix Fietkau2018-02-241-3/+3
| | | | | | | | | issues 62d52e9 mt76: set RX_FLAG_DUP_VALIDATED for A-MPDU reordered packets 5ba5995 mt76x2: rework tx power handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes mt7603 stability issuesFelix Fietkau2018-02-091-3/+3
| | | | | | | | 3413961 mt7603: avoid reordering qos-null data packets c60e6db mt76: toggle driver station powersave bit before notifying mac80211 246d548 mt76: stop tx queues from the driver callback instead of common code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-02-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting f515dfc mt76: implement AP_LINK_PS 974142c mt76: implement processing of BlockAckReq frames c5209db mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pending e67e7a5 mt76x2: do not set status->aggr for NULL data frames 8693864 mt76: check qos ack policy before reordering packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mt76: update to the latest version"Felix Fietkau2018-01-251-3/+3
| | | | | | | This reverts commit 99eb128acaf76a69119fd2de8e194f2b2bbb0427. Connectivity issues reported by users, needs rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, reverts MAC address changes causing ↵Felix Fietkau2017-12-171-3/+3
| | | | | | | | | | | | | | | | | | | performance regressions cf4a5ce mt76: fix memcpy to potential null pointer on failed allocation ca5ca8c mt76x2: fix possible NULL pointer dereferencing in mt76x2_ampdu_action() 2d4b8f5 mt76x2: mac: fix possible NULL pointer dereferencing in mt76x2_mac_write_txwi() 4ca8bba mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g() 00f7e60 mt7603: fix configuration for HT40 31e9bdb mt7603: main: fix possible NULL pointer dereferencing in mt7603_ampdu_action() bf90dd2 mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation 860b185 Revert "mt76x2: init: disable APCLI by default" bcd576e Revert "mt76x2: drop wiphy->addresses" bdc6f2f Revert "mt76x2: clean up MAC/BSSID address initialization" d242650 Revert "mt76x2: remove MAC address limitation for multi-vif setups" 68b0cf1 mt76x2: add functions for setting extended MAC address registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes setting per-vif mac addressFelix Fietkau2017-12-081-3/+3
| | | | | | | | | | | | | | d02a05b mt7603: update firmware to version 20160107100755 4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values" 170f334 mt76x2: remove MAC address limitation for multi-vif setups 3563b8f mt76x2: clean up MAC/BSSID address initialization 9de77e1 mt76x2: drop wiphy->addresses a6a6e25 mt76x2: init: disable APCLI by default c64633e mt76x2: configure rx filter based on monitor mode setting ac815fa mt76x2: init: fix rx filter default value during init e504656 mt7603: configure other-unicast drop based on monitor mode setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, adds stability fixesFelix Fietkau2017-12-031-3/+3
| | | | | | | | | | | | | | | | | | | | | 11f42a8 mt76x2: add channel argument to eeprom tx power functions 3bd7e76 mt76x2: initialize channel power limits 19fff41 mt76x2: convert between per-chain tx power and combined output 737cf2b mt7603: rename mt7603_mac_reset to mt7603_pse_reset 8026638 mt7603: rename MT_PSE_RESET register c4dd32a mt7603: remove watchdog reset on interface stop d99092b mt7603: remove WARN_ON_ONCE for workaround checks c8807b4 mt7603: simplify PSE reset d8a5990 mt7603: warn if PSE reset fails c079960 mt7603: clean up dma debug reads 96817d6 mt7603: make mt7603_mac_watchdog_reset() static e953c78 mt7603: clear wtbl PS bit for powersave responses 57a2e33 mt7603: set tx-skip flag for powersave clients c8e5ab1 mt7603: initialize wtbl ps flag on station add b4034cf mt76x2: remove some harmless WARN_ONs in tx status and rx path 8e17d36 mt7603: remove some harmless WARN_ONs in rx path Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes encrypted mesh support and HT20 issuesFelix Fietkau2017-11-291-3/+3
| | | | | | | | | fc28872 mac80211: add missing include a4c82ca mt7603: add missing include required on newer kernels 792859b mt76x2: fix transmission of encrypted management frames a51358e mt76x2: increase OFDM SIFS time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2017-11-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Significantly improves throughput on MT76x2, fixes some stability issues, adds LED support. Changes: 266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature 758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature e764787 Fix errors found by cppcheck a6fce8a mt7603: add LED definition registers f658dd2 mt76x2: add LED register definitions f6a021d mt76x2: Support using PCI ID as chip ID c9bdcd8 mt76: add led support using mac80211 led framework 58e9138 mt76x2: init: add ma80211 led callbacks 8ea8da3 mt7603: init: add ma80211 led callbacks ded88cd mt76x2: Add PCI identifier for MT7602 51a6764 mt7603: remove unnecessary mcu register read function fbdbf65 debugfs: add support for changing the LED pin cc02e49 mac80211: move DT led configuration to the "led" child node e4e7734 mt76x2: limit client WCID entries to 0-127 60172cc mt76x2: clear drop flag for all WCIDs on init d8140b6 mt76x2: clear per-WCID tx rate lookup register 0ce7923 mt76x2: add helper function for setting drop mask ccc4baf mt76x2: clear drop mask when sending a PS response ff60d14 mt76: increase rx ring size for mt76x2 b57ada5 mt76x2: add rx statistics registers af425de mt76x2: fix LNA gain register annotation efd7724 mt76x2: sync channel gain value with latest reference driver 4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count 70f2002 mt76x2: add more gain tuning based on the latest reference driver 8f1c8ab mt76x2: sync tx power related values with reference driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: use KERNEL_MAKE_FLAGS for kernel file compilationsKarl Vogel2017-10-291-2/+1
| | | | | | | The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS. Make use of this variable for kernel makefiles. Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
* mt76: switch to AutoProbeJonas Gorski2017-10-271-3/+2
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mt76: update to the latest versionFelix Fietkau2017-10-132-89/+3
| | | | | | | e781569 update to latest mac80211/cfg80211 API changes 37654d7 mt76x2: fix tx status ampdu length corner case Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to backports-4.14-rc2Hauke Mehrtens2017-10-011-0/+86
| | | | | | | | | | | | | | | | | | | | This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, improves mt7603 stabilityFelix Fietkau2017-09-281-3/+3
| | | | | | | | cb83f33 mt7603: mac: fix logic in mt7603_tx_hang() 21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy() d5e945e mt7603: mcu: fix indentation of mcu command definition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix mt76x8 dependenciesJohn Crispin2017-09-051-1/+1
| | | | | | | The commit merging mt7628 and mt7688 failed to update some dependencies. Signed-off-by: John Crispin <john@phrozen.org>
* mt76: update to the latest version, fixes stability issuesFelix Fietkau2017-07-211-3/+3
| | | | | | | | 8a649c3 mt7603: mac: code optimization 8dee788 mt7603: mac: stop netdev queues during watchdog reset 3c4c9a6 tx: move state check in mt76_txq_send_burst() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2017-07-051-3/+3
| | | | | | | | | | | | | Fixes mt7603 stablity and performance issues af32615 mt7603: change auto rate control register initialization 01fb9ba mt7603: fix control/status retries count estimation cf4ba12 mt7603: avoid tx rate sampling using no retransmissions 32eab50 mt7603: set wtbl entry vif index c4e3dea mt7603: use the real vif index in txwi header for normal tx. e90a81a mt7603: fix channel width fall back in TXWI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes rate control issuesFelix Fietkau2017-06-171-3/+3
| | | | | | Should improve performance considerably in many cases Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update mirror hash after tar portablity fixFelix Fietkau2017-05-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes a mt7603 beacon issueFelix Fietkau2017-05-301-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, improves mt7603/7628 stabilityFelix Fietkau2017-05-291-4/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, fixes Mesh/IBSS crypto supportFelix Fietkau2017-03-171-3/+3
| | | | | | | | 9f02db7 mt76x2: fall back to software crypto for IBSS/Mesh per-sta GTK 4a54ab3 mt7603: fall back to software crypto for IBSS/Mesh per-sta GTK 712b8e8 mac80211: claim RSN IBSS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, improves mt7603 supportFelix Fietkau2017-03-151-3/+3
| | | | | | | | | | | | | | | | | 03e44dc mt76x2: remove unnecessary headroom check cc70498 mt76x2: clarify queue selection field b056a78 dma: fix endian issue in mt76_dma_get_buf f020a60 mt7603: support loading the entire EEPROM from OTP 29b08d3 mt7603: fix endian issue in mt7603_mcu_set_timing dce8aac mt7603: fix endian issue in mt7603_mac_fill_rx f22273b mt7603: init WTBL entry before setting capabilities da8e796 mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry e54add5 mt7603: move napi/tasklet enable/disable outside of the locked section 59ce2b4 mt7603: set tx vif own MAC index (needed for beacons) 93ce124 mt7603: enable beacons for other virtual interfaces c91e660 mt7603: set secondary beacon time offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* mt76: update to the latest version, fixes a MAC address handling regressionFelix Fietkau2017-02-041-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2017-02-011-3/+3
| | | | | | | | Uses upstream code to parse DT supported band/frequency information. Update existing .dts files to the new format and remove unnecessary overrides. Signed-off-by: Felix Fietkau <nbd@nbd.name>