aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/image
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-221-0/+10
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* sunxi: Added support for Xunlong Orange Pi PC2Antonio Silverio2018-08-091-0/+10
| | | | | | | | | | | | | | | | CPU: H5 High Performance Quad-core 64-bit Cortex-A53 GPU: Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL Memory: 1GB DDR3 (shared with GPU) Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB) Onboard Network: 1000M/100M Ethernet RJ45 USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG, HOST mode role by default in DTS Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Antonio Silverio <menion@gmail.com>
* sunxi: add build for sopineFan Fan2018-03-231-0/+10
| | | | | | This will generate image for Pine64 Sopine board. Signed-off-by: Fan Fan <fkpwolf@gmail.com>
* sunxi: Add support for Xunlong Orange Pi PCVitalij Alshevsky2018-02-261-0/+10
| | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 Onboard header pinout: SPI, I2C, 1-WIRE USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
* sunxi: Add Xunlong Orange Pi Zero PlusHauke Mehrtens2018-02-171-0/+11
| | | | | | | This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-next/sunxi-add-orangepi-zero-plus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for NanoPi NEO Plus2 boardAntony Antony2018-02-171-0/+10
| | | | | | | | | | | | | | arm64: allwinner: h5: NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports & 2x USB via headers Signed-off-by: Antony Antony <antony@phenome.org>
* sunxi: add support for NanoPi M1 Plus boardLuis Araneda2017-11-171-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: add Orange Pi 2 supportZoltan HERPAI2017-11-061-0/+9
| | | | | | | | | | | | | - H3 @ 1.3 GHz - 1GiB DDR3 - 10/100Mbps Ethernet - Realtek RTL8189ETV wifi - 4 USB 2.0 Difference to the "Orange Pi Plus" is the lack of Gbit ethernet and lack of onboard flash. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: Added profile for HAOYU Electronics Marsboard A10Kayo Phoenix2017-11-061-0/+10
| | | | | | | | | The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC. http://linux-sunxi.org/MarsBoard_A10 Signed-off-by: Kayo Phoenix <kayo@illumium.org> [Forward-ported to new target layout:] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: build image for the NanoPi NEODaniel Golle2017-10-081-0/+9
| | | | | | | The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add Orange Pi R1 supportHauke Mehrtens2017-10-011-0/+10
| | | | | | | | | | | | | | | The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add Olimex A20-OLinuXino-LIME2-eMMCLucian Cristian2017-09-241-0/+10
| | | | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add Olimex A20-OlinuXino-LIME2Lucian Cristian2017-09-181-0/+10
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* sunxi: Add A64 support with cortex53 subtargetHauke Mehrtens2017-09-182-0/+21
| | | | | | | | | | | | This adds initial support for the A64 Allwinner SoC to LEDE. It will be build in the new cortexa53 subtarget. Currently it only supports the pine64 and the image is able to boot on this SoC. Camera, Ethernet, HDMI and other parts are currently not working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: split into cortex A8 and A7 subtargetHauke Mehrtens2017-09-183-149/+171
| | | | | | Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: get rid of host.mkFelix Fietkau2017-02-261-1/+0
| | | | | | Defined required host related variables in toplevel.mk instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-241-32/+17
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: use fwtool for checking sdcard imagesYousong Zhou2017-01-051-1/+16
| | | | | | | | | | | | | | To achieve this, device tree compatible string was used as boardname and the value of it will be checked against supported_devices list. It should be noted that we do not distinguish between sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts file. The other thing is that we need to gunzip the generated firmware to do fwtool check. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: convert to new image generation methodYousong Zhou2017-01-052-72/+143
| | | | | | | | | | | The new Device/xxx were transformed automatically from old profiles. Most device names are now taken from basename of the corresponding kernel device tree file. Device/sun5i-a13-olimex-som is an exception because it is not explicitly supported in the kernel yet and shares the same dts file with Device/sun5i-a13-olinuxino Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: fix dts name for Mele M9Yousong Zhou2017-01-051-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* tools: remove old mkdosfs symlink from dosfstoolsÁlvaro Fernández Rojas2016-10-121-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* sunxi: add support for Orange Pi Plus (H3)Zoltan Herpai2016-02-021-1/+5
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48618
* sunxi: respect CONFIG_TARGET_IMAGES_GZIPZoltan Herpai2015-08-151-0/+4
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46608
* sunxi: create KDIR_TMP, build boot.img in itZoltan Herpai2015-08-151-6/+8
| | | | | | | | | | | | | | | | | It's nice to have a distinction between files which are built during the normal OpenWrt build process and ones that are created by the ImageBuilder (like it already exists on some other targets). This also gives boot.img a profile-specific prefix as it contains profile- specific data. KDIR_TMP does not need to be specified since include/image.mk already sets it. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 46607
* sunxi: fix uboot install locationZoltan Herpai2015-08-151-2/+2
| | | | | | | | | | Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix ImageBuilder. Similar fixes are necessary for many (all?) other uboot targets. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46605
* sunxi: don't copy DTS files to BIN_DIRZoltan Herpai2015-08-151-25/+5
| | | | | | | | | The DTS files aren't useful (other targets don't copy them either) and clutter BIN_DIR with files unrelated to the chosen profile. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46604
* sunxi: use common image prefixJo-Philipp Wich2015-05-271-3/+3
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 45788
* sunxi: A20-OLinuXino-Lime profile rename leftoverNicolas Thill2015-02-121-1/+1
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 44423
* sunxi: add support for Lamobo R1Zoltan Herpai2015-01-301-1/+6
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44214
* sunxi: update Olimex A13 SOM profileZoltan Herpai2015-01-181-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44040
* sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, ↵Zoltan Herpai2015-01-091-2/+16
| | | | | | | | mele_m9 support Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43900
* sunxi: add support for Olimex A20-OLinuXino-LIMENicolas Thill2014-11-061-0/+5
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 43189
* scripts: fix wrong usage of '==' operatorJohn Crispin2014-10-141-1/+1
| | | | | | | | | | | | | | [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911
* sunxi: re-add rootfs build when no profile is set, fixes #17980, thanks.Zoltan Herpai2014-10-051-0/+2
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42775
* sunxi: add sdcard image generation support when board profile is selectedZoltan Herpai2014-09-143-1/+98
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42534
* target/linux/*/image/Makefile: use new dts path variableJohn Crispin2014-07-211-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41791
* sunxi: add support for Lemaker bananaPiZoltan Herpai2014-06-011-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40898
* sunxi: add board support for LinkSprite pcDuino v3Zoltan Herpai2014-04-301-1/+2
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40606
* sunxi: sun6i-a31 changes - push remaining sun6i patches for 3.13 - enable ↵Zoltan Herpai2014-02-051-0/+1
| | | | | | | | Colombus A31 devboard (compile-tested only) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39487
* sunxi: fix image generationZoltan Herpai2014-01-131-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39276
* sunxi: various changes - rename hstimer DT on sun5i to avoid confusion - add ↵Zoltan Herpai2014-01-121-3/+4
| | | | | | | | Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39263
* sunxi: add support for Olinuxino A10 LIMEZoltan Herpai2014-01-111-0/+1
| | | | | | | Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39222
* sunxi: add support for pcDuino boardZoltan Herpai2014-01-041-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39190
* sunxi: rework target - update kernel to 3.12 - add patches for clocks, i2c, ↵Zoltan Herpai2013-11-141-96/+16
| | | | | | | | usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 38811
* sunxi: add new targetLuka Perkov2013-11-051-0/+121
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38651
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 11:09:18 +0000